Fuseholders FPG3 https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap/Fingergrip, Snap stepless, 1.0 - 3.0 mm, IEC 60335-1 Fingergrip See below: 250 VAC · 2.5 W / 10 A (VDE) · 500 V · 16 A (UL/CSA) Approvals and Compliances Description Applications - Meets the new requirements of IEC 60335-1 for appliances in unatten- - Household appliances ded use (clause 30.2.3). This includes the enhanced requirements of - Medical equipment glow wire tests acc. to IEC 60695-2-12 and -13. Weblinks - Panel Thickness 1.0 - 3.0 mm, Snap stepless pdf datasheet, html-datasheet, General Product Information, Packaging - White color available on request details, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Shock-Safe Category PC2 Soldering Methods Iron Soldering Profile Fuse-Link 5 x 20 mm Solderability 350 °C / 2 sec acc. to IEC 60068-2-20, Mounting Panel Mount, Front Side Test Ta, method 2 Attachment Snap-in Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20, Terminal Solder or Quick-Connect 4.8 x 0.5 mm Test Tb, method 2 Rated Voltage 250 VAC , 500 V (UL/CSA) Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6 Rated current 10 A (VDE), 16 A (UL/CSA) Dielectric Strength > 3 kV Rated Power Acceptance IEC 2.5 W / 10 A @ Ta 23 °C > 4 kV between L/N-PE Degree of Protection IP 40 (50 Hz; 1 min) Protection Class Suitable for appliances with protection Impulse Withstand Voltage > 2.5 kV between L-N class I acc. to IEC 61140 > 6 kV between L/N-PE Admissible Ambient Air Temp. -40 °C to 85 °C Insulation Resistance > 10 MΩ between L-N Climatic Category 40/085/21 acc. to IEC 60068-1 > 100 MΩ between L/N-PE Material: Socket Thermoplastic, black, UL 94V-0 (500 VDC; 1 min) Material: Terminals Tin-Plated Copper Alloy Overvoltage Category III acc. to IEC 60664-1 Unit Weight 5.3 g Pollution Degree 3 acc. to IEC 60664-1 Storage Conditions 0 °C to 60 °C, max. 70% r.h. Resistance to Vibration acc. to IEC 60068-2-6, test Fc Product Marking , Type, Rated Voltage, Power Acc./ Panel Thickness 1.0 - 3.0 mm Current Rating, Panel Thickness, Ap- provals Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FPG3 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 127216 UL Approvals UL UL File Number: E39328 KTL Approvals KTL Korea Testing Laboratory Fuses 1 Fuseholders FPG3 https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the glow wire test acc. IEC 60335-1 edition 4 Dimension [mm] 40 mm 4 5.5 26.5 8 6 10.5 26.5 8 40 45 S S Variants 3101.0030, 3101.0230, 3101.0031 and 3101.0331 Variants Fingergrip 3101.0035, 3101.0235, 3101.0036 and 3101.0336 s = Panel thickness (see variants) s = Panel thickness (see variants) 0 0 -0.1 -0.1 13 13 Mounting holes 2 Fuses ø 15 0 -0.15 12.35 ø 11.1 ø 12.7 0 11.7 -0.15 + _ 0.2 7.5 1.8 ø 15 ø 12.5 ø 11.1 ø 12.7 + _ 0.2 7.5 Fuseholders FPG3 https://www.schurter.com /PG02 Derating Curves 2.5 2.0 I = 1.0 I n 1.5 I = 0.7 I n I = << I n 1.0 0.5 0.0 020406080 100 Ambient air temperature T °C a All Variants Holder Cap Panel Thickness Terminal Colour Hol- Material Order Number s [mm] der l slotted 1.0 - 1.8mm Solder black Thermoplastic 3101.0030 █ l slotted 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0230 █ █ l slotted 2.0 - 3.0mm Solder black Thermoplastic 3101.0031 l slotted 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0331 l Fingergrip 1.0 - 1.8mm Solder black Thermoplastic 3101.0035 █ l Fingergrip 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0235 l Fingergrip 2.0 - 3.0mm Solder black Thermoplastic 3101.0036 l Fingergrip 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0336 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Bulk 186 x 91 x 91 mm (100 pcs.) Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Fuses 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Admissible power acceptance in Watt 26.02.2018