Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, optional Voltage Selector (step switch) Screw-on mounting from front side Snap-in mounting from front side Screw-on mounting from rear side Version with ground line choke without voltage selector without voltage selector without voltage selector Fuse drawer must be ordered separately (see Fuse drawer must be ordered separately (see Fuse drawer must be ordered separately (see accessories). accessories). accessories). C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Rear side mounting for efficient costsaving assembly Screw-on version from front or rear side, snap-in version from front Suitable for assembly in metal plated plastic housings - All single elements are already wired side - Plug removal necessary for fuse-link replacement - 4 Functions : - Suitable for use in equipment according to IEC/UL 60950 Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm Suitable for use in medical equipment according to IEC/UL 60601-1 1- or 2-pole , with or without voltage selector (step switch) , Line filter in standard and medical version Other versions on request - V-Lock notch standard - Capacity CX 100 nF - Quick connect terminals or wires References Unique Selling Proposition Alternative: version without line filter KEA - Reduces noise on the ground wire Weblinks - Interrupts ground loops pdf datasheet, html-datasheet, General Product Information, Distributor- - High asymmetrical attenuation Stock-Check, Accessories, Detailed request for product, Microsite - V-Lock cord retaining Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Dielectric Strength > 1.7 kVDC between L-N acc. to IEC 60127-6, > 2.7 kVDC between L/N-PE for fuse-links 5 x 20 mm Test voltage (2 sec) Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per Allowable Operation Tempe- -25 °C to 85 °C Ta 23 °C pole rature Power Acceptance @ Ta > Admissible power acceptance at higher Climatic Category 25/085/21 acc. to IEC 60068-1 23°C ambient temperature see derating cur- IP-Protection from front side IP 40 acc. to IEC 60529 ves Protection Class Suitable for appliances with protection Voltage Selector optional, step, 3 pos. class I acc. to IEC 61140 Line Filter Standard and Medical Version, IEC Terminal Quick connect terminals 6.3 x 0.8 mm 60939, UL 1283, CSA C22.2 no. 8 Flexible wire AWG18, 150 mm Technical Details Panel Thickness S Screw: max 8 mm MTBF > 1'700'000 h acc. to MIL-HB-217 F Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KFA Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40004665 (FKE, FKF, FKV, FKW) UL Approvals UL UL File Number: E72928 (FKE, FKF, FKV, FKW) CQC Approvals CQC CCC Certificate Number: CQC18001188536 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R4.1 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Dimensions [mm] Screw-on mounting from front side 2.8 M3/ø3.6 R6 6.3x0.8** 4.8x0.8* R3.1 230 0 R4.5 R3-0.2 +0.3 56* 46.2** 33 0 4.8 31.2 69* 60.5** 34 * with voltage selector ** without voltage selector Screw-on mounting from rear side ±0.15 27.2 2.2 36 R 5 R 2.5 +0.20 R 4 30 9.5 46.8 4.2 30.3 0 R 4 36 60.5 44.3 Snap-in mounting 0.8 - 3 + 0.15 33 37 max. 0.00 5 9.5 (31.4) 32.8 46 60.5 EMC Products 3 R 4 ± 0.1 R3 (28.8) 34 M 3 27.2 9.6 36 2.65 31.2 44 36.5 32.8 x 28.5 37 max. ø 3.2 ø 6.3x90° ±0.15 36 (27.4) 3.6 33 max. ±0.3 29 +0.20 0 34.3 + 0.15 29.35 0.00 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Screw-on mounting from front side with ground line choke ±0.15 36 44 R5 Ø6.3 Ø3.25 0 R4 R3-0.2 ±0.3 27.2 9.5 56.2 4.8 29 36 61 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductance L1/ Inductance L3 Capacitance CX Capacitance CY R [MΩ] L2 [mH] [mH] [nF] [nF] 1 Standard Version 2 x 10 - 68 2.2 - 2 Standard Version 2 x 4 - 68 2.2 - 4 Standard Version 2 x 1.5 - 68 2.2 - 6 Standard Version 2 x 0.8 - 68 2.2 - 10 Standard Version 2 x 0.3 - 68 2.2 - 1 Standard Version with Ground Line Choke 2 x 10 0.6 100 2.2 - 2 Standard Version with Ground Line Choke 2 x 4 0.6 100 2.2 - 4 Standard Version with Ground Line Choke 2 x 1.5 0.6 100 2.2 - 6 Standard Version with Ground Line Choke 2 x 0.8 0.6 100 2.2 - 10 Standard Version with Ground Line Choke 2 x 0.3 0.6 100 2.2 - 1 Medical Version (M5) 2 x 10 - 68 - 1 2 Medical Version (M5) 2 x 4 - 68 - 1 4 Medical Version (M5) 2 x 1.5 - 68 - 1 6 Medical Version (M5) 2 x 0.8 - 68 - 1 10 Medical Version (M5) 2 x 0.3 - 68 - 1 1 Medical Version (M80) 2 x 10 - 68 0.47 1 2 Medical Version (M80) 2 x 4 - 68 0.47 1 4 Medical Version (M80) 2 x 1.5 - 68 0.47 1 6 Medical Version (M80) 2 x 0.8 - 68 0.47 1 10 Medical Version (M80) 2 x 0.3 - 68 0.47 1 1 Medical Version (M5) with Ground Line Choke 2 x 10 0.15 100 - 1 2 Medical Version (M5) with Ground Line Choke 2 x 4 0.6 100 - 1 4 Medical Version (M5) with Ground Line Choke 2 x 1.5 0.6 100 - 1 6 Medical Version (M5) with Ground Line Choke 2 x 0.8 0.6 100 - 1 10 Medical Version (M5) with Ground Line Choke 2 x 0.3 0.15 100 - 1 4 EMC Products 34 31.2 M3 x 0.5 +0.3 33 0 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Diagrams Standard version Standard version Medical version (M5) with voltage selector without voltage selector with voltage selector 3 3 X) X) 2 2 L L’ L L 1 1 F1 L1 L1 F1 L1 F1 1) 2) 1) 2) 1) 2) Cy Cy PE PE’ PE’ R PE’ PE PE Cx Cx Cx F2 L2 F2 F2 L2 Cy L2 Cy X) X) 5 5 N N’ N N x) external connection to be made by the customer 1) Line x) external connection to be made by the customer 2) Load 1) Line 1) Line 2) Load 2) Load Medical version (M5) Medical version (M80) Medical version (M80) without voltage selector with voltage selector without voltage selector 3 X) 2 L L’ L L’ L 1 F1 L1 F1 L1 L1 F1 1) 2) 1) 2) 2) 1) Cy Cy R PE PE’ PE PE’ R R PE’ PE Cx Cx Cx L2 L2 F2 F2 F2 L2 Cy Cy X) 5 N N’ N N’ N 1) Line x) external connection to be made by the customer 1) Line 2) Load 2) Load 1) Line 2) Load Standard version with ground line choke Medical version (M5) with ground line choke Medical version (M80) with ground line choke L L’ L L’ L L’ L1 L1 L1 F1 F1 F1 1) 2) 1) 2) 1) 2) Cy Cy R PE PE’ PE R PE’ PE PE’ Cx Cx Cx L2 F2 L2 F2 F2 L2 Cy Cy N N’ N N’ N N’ L3 L3 L3 1) Line 1) Line 1) Line 2) Load 2) Load 2) Load Derating Curves 1-pole 2-pole 2.0 1.6 1.4 1.5 1.2 I = 1.0 I I = 1.0 I n n 1.0 I = 0.7 I I = 0.7 I n n 1.0 0.8 I = << In I = << In 0.6 0.5 0.4 0.2 0.0 0.0 020406080 100 020406080 100 Ambient air temperature Ta °C Ambient air temperature Ta °C EMC Products 5 Admissible power acceptance in Watt Admissible power acceptance in Watt Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 4 A 6 A 10 A Medical version (M5) 1 A 2 A 4 A 6 A 10 A Medical version (M80) 1 A 2 A 4 A 6 A 10 A 6 EMC Products Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Standard version with ground line choke 1 A 2 A 4 A 6 A 10 A Medical version (M5) with ground line choke 1 A 2 A 4 A 6 A 10 A All Variants Rated Current Filter-Type Panel mounting Mounting Fuseholder Terminal Voltage Selector Order Number [A] side 1 Standard Version Snap-in Front Side 1-pole Quick connect terminals 6.3 x - 4301.6011 0.8 mm 1 Standard Version Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6001 █ 0.8 mm 2 Standard Version Snap-in Front Side 1-pole Quick connect terminals 6.3 x - 4301.6012 0.8 mm 2 Standard Version Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6002 █ 0.8 mm 4 Standard Version Snap-in Front Side 1-pole Quick connect terminals 6.3 x - 4301.6013 0.8 mm 4 Standard Version Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6003 █ 0.8 mm 6 Standard Version Snap-in Front Side 1-pole Quick connect terminals 6.3 x - 4301.6014 0.8 mm 6 Standard Version Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6004 █ 0.8 mm 10 Standard Version Snap-in Front Side 1-pole Quick connect terminals 6.3 x - 4301.6015 0.8 mm 10 Standard Version Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6005 █ 0.8 mm EMC Products 7 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Rated Current Filter-Type Panel mounting Mounting Fuseholder Terminal Voltage Selector Order Number [A] side 1 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5011 █ 0.8 mm 1 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x 3 pos. 4301.5051 0.8 mm 1 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5001 █ 0.8 mm 1 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5041 █ 0.8 mm 1 Standard Version Screw Rear Side 1-pole Flexible wire AWG18 - 4301.7311 1 Standard Version Screw Rear Side 2-pole Flexible wire AWG18 - 4301.7301 1 Standard Version Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7001 █ 0.8 mm 2 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5012 █ 0.8 mm 2 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x 3 pos. 4301.5052 0.8 mm 2 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5002 █ 0.8 mm 2 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5042 0.8 mm 2 Standard Version Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7002 █ 0.8 mm 4 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5013 █ 0.8 mm 4 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x 3 pos. 4301.5053 █ 0.8 mm 4 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5003 █ 0.8 mm 4 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5043 0.8 mm 4 Standard Version Screw Rear Side 1-pole Quick connect terminals 6.3 x - 4301.7013 0.8 mm 4 Standard Version Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7003 0.8 mm 6 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5014 █ 0.8 mm 6 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x 3 pos. 4301.5054 0.8 mm 6 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5004 █ 0.8 mm 6 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5044 0.8 mm 6 Standard Version Screw Rear Side 1-pole Quick connect terminals 6.3 x - 4301.7014 0.8 mm 6 Standard Version Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7004 █ 0.8 mm 10 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5015 █ 0.8 mm 10 Standard Version Screw Front Side 1-pole Quick connect terminals 6.3 x 3 pos. 4301.5055 0.8 mm 10 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5005 █ 0.8 mm 10 Standard Version Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5045 0.8 mm 10 Standard Version Screw Rear Side 1-pole Quick connect terminals 6.3 x - 4301.7015 0.8 mm 10 Standard Version Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7005 █ 0.8 mm 1 Standard Version with Ground Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8050 Line Choke 0.8 mm 2 Standard Version with Ground Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8051 Line Choke 0.8 mm 4 Standard Version with Ground Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8052 Line Choke 0.8 mm 6 Standard Version with Ground Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8053 Line Choke 0.8 mm 8 EMC Products Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Rated Current Filter-Type Panel mounting Mounting Fuseholder Terminal Voltage Selector Order Number [A] side 10 Standard Version with Ground Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8054 Line Choke 0.8 mm 1 Medical Version (M5) Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6201 0.8 mm 2 Medical Version (M5) Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6203 0.8 mm 4 Medical Version (M5) Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6205 0.8 mm 6 Medical Version (M5) Snap-in Front Side 2-pole Flexible wire AWG18 - 4301.6307 6 Medical Version (M5) Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6207 0.8 mm 1 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5241 0.8 mm 1 Medical Version (M5) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7201 0.8 mm 2 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5203 █ 0.8 mm 2 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5243 0.8 mm 2 Medical Version (M5) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7203 █ 0.8 mm 4 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5205 0.8 mm 4 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5245 0.8 mm 4 Medical Version (M5) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7205 0.8 mm 6 Medical Version (M5) Screw Front Side 1-pole Quick connect terminals 6.3 x - 4301.5217 0.8 mm 6 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5247 0.8 mm 6 Medical Version (M5) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7207 0.8 mm 10 Medical Version (M5) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5209 █ 0.8 mm 10 Medical Version (M5) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7209 0.8 mm 4 Medical Version (M80) Snap-in Front Side 2-pole Quick connect terminals 6.3 x - 4301.6206 0.8 mm 1 Medical Version (M80) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7202 0.8 mm 2 Medical Version (M80) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5204 █ 0.8 mm 2 Medical Version (M80) Screw Front Side 2-pole Quick connect terminals 6.3 x 3 pos. 4301.5244 0.8 mm 2 Medical Version (M80) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7204 0.8 mm 4 Medical Version (M80) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5206 0.8 mm 4 Medical Version (M80) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7206 █ 0.8 mm 6 Medical Version (M80) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5208 0.8 mm 6 Medical Version (M80) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7208 0.8 mm 10 Medical Version (M80) Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.5200 0.8 mm 10 Medical Version (M80) Screw Rear Side 2-pole Quick connect terminals 6.3 x - 4301.7200 0.8 mm 1 Medical Version (M5) with Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8055 Ground Line Choke 0.8 mm 2 Medical Version (M5) with Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8056 Ground Line Choke 0.8 mm 4 Medical Version (M5) with Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8057 Ground Line Choke 0.8 mm EMC Products 9 Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Rated Current Filter-Type Panel mounting Mounting Fuseholder Terminal Voltage Selector Order Number [A] side 6 Medical Version (M5) with Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8058 Ground Line Choke 0.8 mm 10 Medical Version (M5) with Screw Front Side 2-pole Quick connect terminals 6.3 x - 4301.8059 Ground Line Choke 0.8 mm █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Wire length: 150 mm 10 Pcs Packaging unit Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole, Voltage Selector, 110, 150, 220 4301.1014.01 Fingergrip, 2-pole, Voltage Selector, 120, 240 4301.1014.02 Fingergrip, 2-pole, Voltage Selector, 110, 220 4301.1014.03 Fingergrip, 2-pole, Voltage Selector, 115, 220 4301.1014.04 ... Accessories Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0072 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 10 EMC Products Power Entry Modules with Line Filter KFA https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KFA Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to KFA ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to KFA The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 11 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 28.03.2018