Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals See below: Approvals and Compliances Description Applications - Threaded neck type 6 mm - Power tools - Thermal circuit breaker - Household Equipment - 1-pole - Power supplies and chargers - Reset type - Industrial appliances - Quick connect terminals 6.3 x 0.8 mm Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Unique Selling Proposition - Compact design Stock-Check, Detailed request for product, Product News - Positively trip-free release - Available with cover - Different mounting possibilities Technical Data Rated Voltage AC 240 V: 50/60 Hz Overload IEC: min. 40 trips @ 6 x Ir, cos φ 0.6 Rated Voltage DC 48 V ␣ UL / CSA: min. 50 trips Rated current range AC 0.05 - 16 A @ 1.5 x Ir, cos φ 0.75 Conditional short circuit ca- IEC: Inc, PC1, AC 240 V: 2 kA Allowable Operation Temp. -5 °C to 60 °C pacity Vibration Resistance ± 1.5 mm @ 10 - 60 Hz Short circuit capacity Icn at In < 6.5 A/240 VAC : 8 x In acc. to IEC 60068-2-6, test Fc ␣ at In ≥ 6.5 A/240 VAC : 96 A 5 G @ 60 - 500 Hz Degree of Protection from front side IP 40 acc. to IEC 60529 acc. to IEC 60068-2-6, test Fc Dielectric Strength 50 Hz: > 1.5 kV Shock Resistance 100 G / 6 ms Impulse 1.2/50 μs: > 2.5 kV acc. to IEC 60068-2-27, test Ea Insulation Resistance 500 VDC > 100 MΩ Tripping Type Thermal Endurance typical 2 x Ir: 500 switching cycles Actuation Type Reset type Endurance minimum Reset type Weight ca. 10 g AC : 2 x Ir , cos φ 0.6 : DC : 2 x Ir , L/R = 2 - 3 ms : 50 switching cycles Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T11 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 99759 UL Approvals UL UL File Number: E71572 CQC Approvals CQC CCC Certificate Number: 2012010307564692 Circuit Breakers 1 SW 14 Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] T11-211 <7,5A T11-211 >7,5A T11-211N Ø 4 9 10 3 3.6 12 3/8-27UNS-2A 1) 11 19 15.2 6.3 1) max. torque 0.6Nm 2 Circuit Breakers 13.5 11.0 2.5 34.5 6 50.2 9.2 44 Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Diagrams Rated current ≤7,5 A Rated current >7,5 A Shunt terminal T11-...N ≤6,5 A 1 1 1 2 3 2 3 Typical internal resistance Rated Current [A] Internal Resistance [Ω] 0.05 380.000 0.50 5.200 1.00 1.350 2.00 0.300 3.00 0.130 4.00 0.080 5.00 0.040 6.00 0.040 7.00 0.020 8.00 0.012 9.00 0.012 10.00 0.011 11.00 0.0095 12.00 0.0095 13.00 0.0085 14.00 0.0085 15.00 0.0075 16.00 0.0075 Circuit Breakers 3 Ø 9.6 8.9 Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Time-Current-Curves [ min ] [ sec ] 10`000 < 6,5 A > 6,5 A 60 2`000 30 20 1`000 10 500 5 200 100 1 50 20 10 5 2 1 0,5 0,3 0,2 0,1 1,05 1,35 2 3 4 5 8 10 Multiple of Rated Current In Reference Temperature +23° Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated cur- rent for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [°C] Correction factor -5 0.87 0 0.90 +10 0.95 +23 1.00 +30 1.04 +40 1.10 +50 1.15 +60 1.20 Example: Rated current = 5 A, Environmental temperature = 40 °C, --> Correction factor = 1.1, Resulting current = 5.5 A --> Fount to next higher rated current: 6 A Config. Code T11|-|1|2|3|A|B|-|1.23| The characters are placeholders for the correspondingly keys of selections from the key tables. T11|-| 1 |2|3|A|B|-|1.23| = Mounting Terminal Configuration key Mounting Configuration key Quick connect terminal 6.3x0.8mm 1 Threaded neck type 6 mm 2 T11|-|1|2|3| A |B|-|1.23| = Shunt terminal T11|-|1| 2 |3|A|B|-|1.23| = Actuation Type Shunt terminal Configuration key Actuation Type Configuration key Shunt terminal N Reset type 1 T11|-|1|2|3|A| B |-|1.23| = Setting indication T11|-|1|2| 3 |A|B|-|1.23| = Terminal 4 Circuit Breakers Time in Seconds Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Setting indication Configuration Rated current Configuration key key Setting indication R 2.1 A 2.1 2.3 A 2.3 2.5 A 2.5 T11|-|1|2|3|A|B|-| 1.23 | = Rated current 2.8 A 2.8 Rated current Configuration 3.0 A 3 key 3.3 A 3.3 0.05 A 0.05 3.5 A 3.5 0.1 A 0.1 4.0 A 4 0.15 A 0.15 4.5 A 4.5 0.2 A 0.2 5.0 A 5 0.3 A 0.3 5.5 A 5.5 0.4 A 0.4 6.0 6 0.5 A 0.5 6.5 A 6.5 0.6 A 0.6 7.0 A 7 0.7 A 0.7 7.5 A 7.5 0.8 A 0.8 8.0 A 8 0.9 A 0.9 8.5 A 8.5 1.0 1 9.0 A 9 1.1 A 1.1 9.5 A 9.5 1.2 A 1.2 10.0 A 10 1.3 A 1.3 11.0 A 11 1.4 A 1.4 12.0 A 12 1.5 A 1.5 13.0 A 13 1.6 A 1.6 14.0 A 14 1.7 A 1.7 15.0 A 15 1.8 A 1.8 16.0 A 16 1.9 A 1.9 Other rated currents on request 2.0 A 2 Other rated currents on request Variants Rated current Construction variants Config. Code Order Number Shunt terminal Setting indication █ 1.0 T11-211-1 4400.0008 3.0 A T11-211-3 4400.0010 █ 0.8 A T11-211-0.8 4400.0042 █ █ 12.0 A T11-211-12 4400.0052 █ 1.5 A T11-211-1.5 4400.0056 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/ Stock-Check-SCHURTER 100 Pcs Packaging Unit Circuit Breakers 5 Thermal (T- and TA-Line) T11-211 https://www.schurter.com /PG17_18_19 Accessories Description T-Line Accessories Accessories to T-Line The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Circuit Breakers to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 04.05.2018