Electronics Finder

Description

Switching Power Supplies

Part Number

MINT1065D1375C02

Price

Request Quote

Manufacturer

SL POWER

Lead Time

Request Quote

Category

Capacitors » DC-DC Converter

Specifications

Manufacturer

SL Power

Manufacturers Part #

MINT1065D1375C02

Brand

Condor

Factory Pack Quantity

Datasheet

MINT1065D_DS.pdf

403 KiB

Download

Extracted Text

MINT1065D 65W Single Output Series rd Medical, 3 Edition Certified Universal Input Power Supply 3 Year Warranty •65W Convection Cooled AC-DC Power Supply •Universal Input 90-264 VAC •Class I or Class II input versions •Less 0.5W No Load Power Dissipation •Rugged EMC Compliant Design •2” x 4” x 1.2” Package •ANSI AAMI ES/CSA/EN/IEC 60601-1, 3rd Edition Certified •Meets Efficiency Level IV Efficiency • Compliant (LVD, RoHS) •Optional Chassis/Cover RoHS Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. AC Input Turn On Time 100-240VAC +/- 10%, 47-63 Hz single phase. Less than 1 second under all rated load conditions. Input Current Hold-up Time 115VAC: 0.7A, 230VAC: 1.5A. <17 ms at 65W, nominal input (120VAC). Inrush Current Overvoltage Protection The inrush at 264VAC, at a cold start, will not exceed 40A. Built-in Input Fuses Overload Protection F1, F2: 2.5A, 250VAC fuses provided on all models. Hiccup Mode Efficiency Short Circuit Protection Up to 90% typical. Hiccup Mode Earth Leakage Current Isolation <300μA @ 264Vac, 60Hz, normal; <500μA SFC. Touch Current is Input-Output: 4000Vac/2 MOOP <100µA NC, <500µA SFC @ 264Vac, 60Hz, measured from output to Input-Ground: 1500Vac/1 MOOP ground Output Power Medical Safety Standards 65W continuous. ANSI AAMI ES/CSA/EN/IEC 60601-1, 3rd Edition Ripple and Noise Switching Frequency 1% pk-pk max., 20MHz BW, differential mode. Measured with noise Variable 50-75kHz typical. probe directly across output terminals. Output Voltage Operating Temperature See chart. 0 to 70C (derate from full rated power above 40C). Voltage Adjustability Cooling Voltage pre-set by fixed resistance. Convection Minimum Load Output Power Derating Not required. See derating chart Total Regulation Storage Temperature +/- 2%. See chart. -40 to +85C. Transient Response Relative Humidity 500μs max., 50% load step, typical. 5% to 95%, non-condensing ______________________________________________________________________________________________________________________________ 1 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com MINT1065D 65W Single Output Series rd Medical 3 Edition Certified Universal Input Power Supply 3 Year Warranty Output Parameters Model Output Current Ripple Total OVP Number Volts (V) Open Frame w/cover & Noise Regulation Threshold MINT1065D1275K01 12V 5.25A 4.00A 120mV ±2% 15.0 ± 1.5V MINT1065D1375K01 13.2V 4.80A 3.63A 140mV ±2% 16.0 ± 1.5V MINT1065D1575K01 15V 4.33A 3.20A 150mV ±2% 18.0 ± 1.5V MINT1065D1875K01 18V 3.50A 2.66A 180mV ±2% 21.0 ± 2.0V MINT1055D2075K01 20V 3.25A 2.40A 200mV ±2% 23.0 ± 2.0V MINT1065D2475K01 24V 2.70A 2.00A 240mV ±2% 27.0 ± 2.0V MINT1065D4875K01 48V 1.35A 1.00A 480mV ±2% 55.0 ± 4.0V Specifications (continued) Vibration Shock 2 Operating: 0.003 g /Hz, 1.5 g overall, 3 axes, 10 min. / axis Operating: Half-sine, 20 g , 10 ms, 3 axes, 6 shocks total rms pk 2 Non-Operating: 0.026 g /Hz, 5.0 g overall, 3 axes, 1 hr. / axis Non-Operating: Half-sine, 40 g , 10 ms, 3 axes, 6 shocks total rms pk Pollution Degree Overvoltage Category 2 OVCII (2500V for Mains), OVCI (1500V for Secondary) Dimensions Operating Altitude W 2.0” x L 4.0” x H 1.17”. See outline drawing. Up to 4000m. Weight Non-operating Altitude 150 grams -500 to 40,000 ft. EMI/EMC Compliance Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Radiated Emissions EN55011 Class A, FCC Part 15, Class A. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 240VAC, 0%/0.5 cycle, 40%/5cycles, 70%/25 cycles Model Number Key MINT 1 065 X 12 75 K 01 Model: "01" = Standard Model, 02 and higher indicates a modified model. Input Connector: "K" = 3 pin Header (class I input); "C" = 2 pin Header (class II input). Output Connector: "75" = Output Connector, 4 pin header. Other options available, consult factory. Output Voltage: "12" = 12V, "24" = 24V, etc. Configuration: "D" = EN60601-1 3rd Edition Certified, "C" = Optional chassis & cover (class I only). Output Pow er: "065" = 65W # of Outputs: "1" = Single output Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology ______________________________________________________________________________________________________________________________ 2 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com MINT1065D 65W Single Output Series rd Medical 3 Edition Certified Universal Input Power Supply 3 Year Warranty Mechanical Drawings and Connector Information MINT1065 Series Connectors INPUT: J1 AMP P/N 641937-1 PIN 1) AC LINE PIN 2) AC NEUTRAL OUTPUT: J2 AMP P/N 640445-4 PIN 1) +Vout PIN 3) -Vout PIN 2) +Vout PIN 4) -Vout MATING CONNECTORS: P1 Molex 09-50-3031 P2 Molex 09-50-3041 Pins: Molex 08-50-0105 GND CONNECTION (Class I version) 0.187" FASTON TAB Output Power Derating Curve Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-19-12 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 3 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products