SPECIFICATION CONTROL DRAWING 0024A0311 Date 2-21-13 100 OHM, AWG 24, 19 STRANDS OF AWG 36, TWINAXIAL CABLE CHEMINAX Revision G THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 100 ± 10 ohms, Method C at 1 MHz MUTUAL CAPACITANCE 13.5 pF/ft. (nominal) CONDUCTORS VELOCITY OF PROPAGATION 79% (nominal) A WG 24, 19 Strands of .0235 AWG 36, Tin-Coated Copper ADDITIONAL REQUIREMENTS ELECTRICAL .055 DIELECTRICS CONDUCTOR RESISTANCE 25.7 ohms/1000 ft. (nominal) Rayfoam L Colors - White/Tan INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST 1.0 kV (rms) IMPULSE TEST 6.0 kV (peak) VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum) ENVIRONMENTAL FLAMMABILITY Method C SHIELD .127 AWG 38, HEAT SHOCK 225°C Tin-Coated Copper LOW TEMPERATURE-COLD BEND -55°C/1.50 inch mandrel VOLTAGE WITHSTAND 1000 volts (rms),1 minute (Post Environmental) PHYSICAL INSULATION (DIELECTRIC) (Prior to Cabling) ELONGATION 50% (minimum) JACKET 2 TENSILE STRENGTH 800 lbf/in (minimum) .157 Thermorad S (nominal) JACKET .166 ELONGATION 100% (minimum) 2 (maximum) TENSILE STRENGTH 2000 lbf/in (minimum) JACKET THICKNESS .015 inch (nominal) SHIELD COVERAGE 90% (minimum) Outer jacket color will be white (designated by a “-9" appended to the part number, e.g. 0024A0311-9) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 16.0 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Thermorad, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS 501 Oakside Avenue REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE Redwood City, California 94063-3800 ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 Fax: 1-650-361-6297 © 2012-2013 Tyco Electronics Corporation, All rights reserved.