RF Signal Relays AXICOM Telecom-, Signal and RF Relays Sep. 07, Rev. B HF6 Relay HF6 Relay Terminal assignment n Y-Design Relay top view n Frequency range DC to 6GHz n Impedance 50Ω n Small dimensions (16x7.6x10mm) Non-latching type, Latching type, 1 coil Latching type, 2 coils n 1 form C contact (1 changeover contact) not energized condition rest condition reset condition n Immersion cleanable n Low power consumption (≤140mW) Telecom-, Signal and RF Relays Sep. 07, Rev. B Typical applications Measurement and test equipment ATE, wireless base stations and HF6 Relay antennas, wireless infrastructure, RF power amplifier Terminal assignment Relay top view Contact Data Contact Data (continued) Contact arrangement 1 form C, 1 CO 50Ω version, bistable, 2 coils Max. switching voltage 220VDC, 250VAC 91 3 2.25 6.50 2.25 64 140 Non-latching type, Latching type, 1 coil Latching type, 2 coils Rated current 2A 92 4.5 3.38 9.80 3.38 145 140 Limiting continuous current 2A 93 5 3.75 10.90 3.75 178 140 not energized condition rest condition reset condition Switching power 60W, 62.5VA, 94 6 4.50 13.00 4.50 257 140 50W (2.5GHz) 95 9 6.75 19.60 6.75 574 140 Max. continuos RF-power at 20°C. 50W (2.5GHz) 96 12 9.00 26.10 9.00 1028 140 Contact material Ag, Au covered 97 24 18.00 52.30 18.00 2880 200 All figures are given for coil without pre-energization, at ambient temperature +23°C. Minimum switching voltage 100µV Initial contact resistance <100mΩ at 10mA/30mV Coil Operating Range Operate time typ. 3ms, max. 5ms Release time without diode in parallel 140 mW typ. 2ms, max. 5ms 70 mW with diode in parallel typ. 4ms, max. 6ms Coil operating Range Bounce time max. typ. 1ms, max. 3ms 3.5 Duration of set/reset pulse min. 20ms 140 mW 7 70 mW Mechanical endurance 10 operations 3 Umax. at 0 A Umax. at 0 A 2.5 Coil Data Coil voltage range 3 to 24VDC 2 Coil versions, 50Ω version, monostable 1.5 Coil Rated Operate Limiting Release Coil Rated coil U nom. nominal coil voltage code voltage voltage voltage voltage resistance power 1 U nom. nominal coil voltage VDC VDC VDC VDC Ω±10% mW min. max. min. Uop. min. 51 3 2.25 6.50 0.30 64 140 0.5 Uop. min. 52 4.5 3.38 9.80 0.45 145 140 Urel. min. Coil Operating Range 53 5 3.75 10.90 0.50 178 140 0 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 54 6 4.50 13.00 0.60 257 140 Ambient Temperature [°C] 55 9 6.75 19.60 0.90 574 140 Ambient Temperature [°C] 140 mW 70 mW 56 12 9.00 26.10 1.20 1028 140 57 24 18.00 52.30 2.40 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. 3.5 U = Nominal coil voltage 140 mW nom 70 mW U = Upper limit of the operative range of max. Contact Data (continued) 3 Umax. at 0 A the coil voltage (limiting voltage) Coil versions, bistable Umax. at 0 A Coil Rated Set Limiting Reset Coil Rated coil U = Lower limit of the operative range of 2.5 op. min. code voltage voltage voltage voltage resistance power the coil voltage (reliable operate voltage) VDC VDC VDC VDC Ω±10% mW 2 For latching relays U resp U min. set min. . reset 50Ω version, Bistable, 1 coil U = Lower limit of the operative range of rel. min. 71 3 2.25 9.20 -2.25 128 70 1.5 U nom. nominal coil voltage the coil voltage (reliable release voltage) 72 4.5 3.38 13.85 -3.38 289 70 1 U nom. nominal coil voltage 73 5 3.75 15.30 -3.75 357 70 74 6 4.50 18.50 -4.50 514 70 Uop. min. 0.5 75 9 6.75 27.70 -6.75 1157 70 Uop. min. Urel. min. 76 12 9.00 37.00 -9.00 2057 70 0 77 24 18.00 74.00 -18.00 8228 70 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 Ambient Temperature [°C] Ambient Temperature [°C] All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 1 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product da U = Nominal coil voltage ta is subject to the Datasheets, product data, ‘Definitions’ sec- nom www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications U = Upper limit of the operative range of max. © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. the coil voltage (limiting voltage) a TE Connectivity Ltd. company http://relays.te.com/definitions U = Lower limit of the operative range of op. min. the coil voltage (reliable operate voltage) For latching relays U resp U min. set min. . reset U = Lower limit of the operative range of rel. min. the coil voltage (reliable release voltage) All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] RF Signal Relays AXICOM HF6 Relay (Continued) Insulation Data Other Data Initial dielectric strength Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content between open contacts 600Vrms refer to the Product Compliance Support Center at between contact and coil 1000Vrms www.te.com/customersupport/rohssupportcenter Initial surge withstand voltage Ambient temperature -55°C to +85°C between open contacts 1000V Thermal resistance <165K/W between contact and coil 1500V Category of environmental protection IEC 61810 RT III - wash tight Degree of protection, IEC 60529 IP 67, immersion cleanable RF Data Vibration resistance (functional) 35g, 10 to 1000Hz Isolation at 900MHz/3GHz/6GHz 80dB/60dB/30dB Shock resistance (functional), half sinus 11ms 50g Insertion loss at 900MHz/3GHz/6GHz 0.05dB/0.15dB/0.80dB Shock resistance (destructive), half sinus 0.5ms 150g Voltage standing wave ratio (VSWR) Terminal type SMT at 900MHz/3GHz/6GHz 1.05/1.10/1.40 Weight max. 3g Typical RF performance, 50Ω version Resistance to soldering heat Peak value SMT IEC 60068-2-58 250°C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 Ultrasonic cleaning not recommended Packaging/unit, SMT reel/400 pcs., box/400 pcs. or 2000 pcs. PCB layout TOP view on component side of PCB Terminal assignment TOP view on component side of PCB Monostable Bistable, 1 coil Bistable, 2 coils Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. 2 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions RF Signal Relays AXICOM HF6 Relay (Continued) Dimensions Processing Resistance to soldering heat Infrared soldering temperature/time profile (lead and housing peak temp.) Time [s] Recommended soldering conditions Vapour phase soldering 20 to 40s full line: typical dotted line: process limits 240°C 180°C forced cooling 130°C external preheating 100°C Vapour phase soldering temperature/time profile Packing (lead and housing peak temp.) Tape and reel for SMT Time [s] Reel dimensions 3 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Temperature [°C] Temperature [°C] RF Signal Relays AXICOM HF6 Relay (Continued) Product code structure Typical product code HF6 53 Type HF6 High Frequency Relays HF6 Series 1 form C, 1 CO Coil Coil code: please refer to coil versions table Performance type 5x 50 Ohm version, monostable 1coil 7x 50 Ohm version, bistable 1coil 9x 50 Ohm version, bistable 2coils Product code Arrangement Version Coil Coil type Part number HF6 51 1 form C (1 CO) 50ohm 3VDC Monostable 1462052-1 HF6 53 5VDC 1462052-3 HF6 56 12VDC 1462052-6 HF6 73 1 form C (1 CO) 50ohm 5VDC Bistable 1 coil 1-1462052-0 HF6 93 1 form C (1 CO) 50ohm 5VDC Bistable 2 coils 1-1462052-7 HF6 96 12VDC 2-1462052-0 This list represents the most common types and does not show all variants covered by this data sheet. Other types on request 4 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions