SPECIFICATION CONTROL DRAWING 2021D0309 2 3-7-18 120 OHM, 0.508 mm , 19 STRANDS OF 0.19 mm, Date: TWINAXIAL CABLE, J1939-11 COMPLIANT CHEMINAX K Revision: THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS CHARACTERISTIC IMPEDANCE 120 ± 12 ohms, Method D at 1 MHz OTHERWISE DESIGNATED. with wrap grounded MUTUAL CAPACITANCE 10.5 pF/ft. (nominal) at 1 MHz CONDUCTORS 2 VELOCITY OF PROPAGATION 75% (nominal) 0.508 mm , .0344 19 Strands of 0.19 mm, SURFACE TRANSFER IMPEDANCE 225 milliohms/meter (maximum) Bare Copper (per SAE AS85485) at 0.1 to 1 MHz .092 (nominal) DIELECTRICS .094 ADDITIONAL REQUIREMENTS Rayfoam M (maximum) 1/ Colors - Yellow/Green ELECTRICAL .080 FILLERS CONDUCTOR RESISTANCE 11.3 ohms/1000 ft. (nominal) Polyolefin (prior to cabling) INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS DRAIN WIRE 2 SPARK TEST 1.0 kV (rms) 0.508 mm , IMPULSE TEST 6.0 kV (peak) 19 Strands of 0.19 mm, .0344 Bare Copper VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum) (cabled in) .234 WRAP ENVIRONMENTAL Aluminum-PET- FLAMMABILITY Method C Aluminum HEAT SHOCK 225°C LOW TEMPERATURE-COLD BEND -55°C/8.00 inch mandrel VOLTAGE WITHSTAND 1000 volts (rms), 1 minute (Post Environmental) PHYSICAL .294 INSULATION (DIELECTRIC) JACKET (nominal) ELONGATION 100% (minimum) 2 Thermorad F .334 TENSILE STRENGTH 1000 lbf/in (minimum) (maximum) JACKET ELONGATION 200% (minimum) 2 TENSILE STRENGTH 2000 lbf/in (minimum) JACKET THICKNESS .025 inch (minimum), .030 inch (nominal), .040 inch (maximum) WRAP .003 inch thick (nominal), 10% overlap (minimum) CABLE IDENTIFICATION: Outer jacket shall be marked in contrasting color Designate outer jacket color with a dash number in accordance at 12 inch (nominal) intervals as follows: with MIL-STD-681. Unless otherwise specified, outer jacket color 2 will be black designated by a "-0" appended to the part number, for product jacketed in USA: "RAYCHEM J1939-11 0.5 mm " 2 (e.g. 2021D0309-0). for product jacketed in Mexico: "RAYCHEM J1939/11 0.5 mm " 1/ Component Wire Stripe Option: Dielectrics striped red will be designated with a slash separating component wire colors, WEIGHT 34.3 lbs/1000 ft. (nominal) (e.g. 2021D0309-42/52-0). Other codes and suffixes may be added to the part number, as ENGINEERING REFERENCE necessary, to capture any additional requirements imposed by TEMPERATURE RATING 125°C (maximum) the purchase order. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Thermorad, Cheminax, Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. 501 Oakside Avenue REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Redwood City, California 94063-3800 © 2005-2018 TE Connectivity Ltd. family of companies. All Rights Reserved. Phone: 1-800-522-6752 Fax: 1-650-361-6297