Kilovac Solid State Relays Kilovac Solid State Relays JPS10 Series High Performance Solid State Relays For AC Loads up to 25A @ 250Vrms Product Facts n Qualified to MIL-PRF-28750D (Mil Part Numbers M28750/10-001Y and M28750/10-002Y) n Optically coupled all solid state relay n TTL compatible input n Zero voltage turn-on for low EMI n Custom power package The JPS10 series solid state switching of resistive or zero voltage turn-on window relay is designed for AC reactive loads. TTL compat- of 15 volts (preferred version 10 power switching up to ible input circuitry is optically for resistive loads), and the 25 amps at 250Vrms. The isolated to 1,500Vrms from JPS10-2Y with a maximum circuit employs back-to- the AC load circuit. The relay window of 40 volts (pre- back photo SCRs with zero is offered in two versions: the ferred version for reactive voltage turn-on for reliable JPS10-1Y with a maximum loads). Kilovac Part Number Military Part Number Zero Crossing Window JPS10-1Y M28750/10-001Y 15 V pk max. JPS10-2Y M28750/10-002Y 40 V pk max. Circuit Diagram Outline Drawing Terminal View .172 (4.37) - 3 PLS .245 ±.025 2 PLS CONTRASTING _ FOR #8 [.164 (4.17)] + (6.22 ± .63) DC Control BEAD IS SCREW + INPUT TERMINAL Source .040 ±.002 DIA. 12 (1.02 ± .05) 2 1.99 1 (50.5) 2.41 MAX. ±.002 .080 DIA. (61.2) 2.05 (2.03 ± .05) (52.1) 34 COPPER 3 4 CORED WIRE AC Power .825 LOAD .505 ±.025 2 PLS (20.96) (12.83 ± .63) 1.57 MAX. (39.9) TOLERANCE: ±.010 (.25) UNLESS OTHERWISE NOTED 1.845 MAX. 1.30 MAX. (46.86) TERMINAL NUMBERS SHOWN (33.0) ARE FOR REFERENCE ONLY, AND DO NOT APPEAR ON RELAY. 10–19 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. Ambient Temperature (W/O Heat Sink) Kilovac Solid State Relays JPS10 Series High Performance Solid State Relays For AC Loads up to 25A @ 250Vrms (Continued) Environmental Characteristics Electrical Specifications (-55°C to +105°C unless otherwise specified) Ambient Temperature Range — Input Operating — -55°C to +110°C Input supply voltage range (Vcc) 4 - 32 Vdc Storage — -55°C to +125°C Input current (max.) 16mAdc Vibration Resistance — 30 G’s, 10-3,000 Hz Must turn-on voltage 4Vdc Shock Resistance — Must turn-off voltage 1Vdc 1,500 G’s, 0.5 ms pulse Reverse voltage protection -32Vdc Constant Acceleration Resistance I/O (Y1 axis) — 5,000 G’s Dielectric strength (min.) 1,500Vrms/60 Hz. 9 Insulation resistance (min.) @ 500Vdc 10 ohms Capacitance (max.) 20pF Output Mechanical Characteristics Output current rating (max.) 25Arms (Fig. 2, Note 1) Weight (max.) — Surge current (max.) 80A pk (Fig. 1, Note 2) 6 oz. (170 grams) Continuous load voltage (max.) 250Vrms Materials — Transient blocking voltage (max.) 500V pk Case — Aluminum, hot tin dipped Terminals — Copper cored wire, gold Frequency range 45 - 440 Hz. plated Output voltage drop (max.) @ 25A load current 1.5Vrms Off-state leakage current (max.) @ 220Vrms/400 Hz. 10mArms Turn-on time (max.) 1/2 cycle Turn-off time (max.) 1 cycle Off-state dv/dt (min.), with snubber 100V /μs (Note 3) Zero voltage turn-on window (max.), JPS10-1Y 15V pk Zero voltage turn-on window (max.), JPS10-2Y 40V pk Waveform distortion (max.) 4Vrms Output chip junction temperature (max.) 125°C (Note 4) Thermal resistance (max.), junction to ambient 6.8°C/W Thermal resistance (max.), junction to case 1.2°C/W Notes 1. Operation at elevated load currents up to 25 amps is dependent on the use of suitable heatsink to maintain case temperature per Fig. 2. 2. Heating of output chips during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating. 3. Internal snubber network is provided across output chips. 4. Case temperature measurement point is center of mounting surface. Figure 1 - Peak Surge Current vs. Surge Current Duration Figure 2 - Load Current vs. Temperature Case Temperature 26 24 1000 22 20 800 18 16 14 600 12 10 400 8 6 200 4 2 0 0 10 1001000 10,000 -55 -35-15 0525456585 105 125 Surge Current Duration (mSec) Temperature (°C) 10–20 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. Peak Surge Current, Non-Repetitive (% of Rated Current) Output Current (Amps rms)