TE CONNECTIVITY 601064-000

Electrical Interconnect Products Coaxial Cable Termination SolderSleeve PCB/Coaxial Cable Terminators Product Facts ■ Provides a completely shielded, low-resistance, matched-impedance termination with very low VSWR (D-607 series only) ■ Transparent polyvinylidene fluoride insulation sleeve provides encapsulation, inspectability, strain relief, and insulation ■ Prefluxed solder preform provides a controlled soldering process ■ One-piece design offers easy installation and lower installed cost ■ Preinstalled PCB termination body provides convenience and ease of installation Applications Installation Product Selection Process Used for terminating coaxial For proper installation of 1. Select product series cable to printed circuit these devices, the correct from the Product Options boards. heating tool and reflector table below. attachment must be used. 2. Determine cable RG Any one of the following TE number or outside diame- heating tools is recom- ter dimensions. mended: 3. Select the appropriate ■ HL1910E/HL2010E part number from Table A ■ AA-400 Super Heater (D-607 series) or Table B (B-046 series). ■ IR-1759 MiniRay ■ For D-607 (matched ■ CV-1981 8 impedance) series, deter- Refer to TE installation mine straight or right- procedure ES-61139 for angle entry to PCB and detailed instructions and grid pattern, then select recommended reflector the appropriate part num- attachments. ber from Table A on the next page. You will find ordering infor- mation for these tools in ■ For B-046 (PinPak, or pin Section 10. to ground) series, deter- mine hole spacing and diameter. Refer to Table B for product selection (see illustration below for cable dimensions). AB C D Available in: Americas ■ Europe ■ Asia Pacific ■ Product Options Product Series Typical Application Performance Shield Method Part No. Selection Table D-607 Matched impedance up to 2.3 GHz Metal body A B-046 Effective transmission up to 100 MHz Pin to ground B 8-57 Catalog 1654025 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Coaxial Cable Termination SolderSleeve PCB/Coaxial Cable Terminators (Continued) Specifications/Approvals Series TE D-607 RT-1404 B-046 RT-1404 Table A. D-607 Series Part Numbers Cable Dimensions (mm/in) Part No. Max. Outside Diameter Entry to PCB RG Cable No. Straight Right-Angle Straight Jacket Shield Dielectric grid 5.08 [.200] Grid 5.08 [.200] Grid 2.54 [.100] 174, 178, 179, 1.5–3.55 1.1–3.15 0.60–2.25 D-607-09 D-607-10 D-607-40* 316, 404 [.060–.140] [.045–.125] [.025–.090] Table B. B-046 Series Part Numbers Cable Dimensions Part No. RG Cable No. D Pin Diameter Spacing Between Pins AB C 5.08 [.200] 6.35 [.250] Max. 2.54 [.100] B-046-10-N B-046-12-N 0.30–0.80 0.5–1.7 1.3–2.3 3.4 0.6 [.023] 178, 404 B-046-14-N [.011–.032] [.019–.067] [.050–.091] [.134] 0.8 [.031] B-046-11-N B-046-13-N B-046-66-N B-046-16-N 0.3–1.6 1.2–2.5 .1.5–2.8 4.4 0.6 [.023] 179, 316 B-046-15-N [.011–.063] [.047–.100] [.060–.110] [.173] 0.8 [.031] B-046-68-N B-046-18-N Product Characteristics Material Insulation Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride Solder and flux Solder: Sn63 Pb37 Flux: ROL1 per ANSI - J - 004 (RMA flux) Termination body/pin Copper alloy, solder-plated Typical Performance Voltage drop 2.0 mV Tensile strength Exceeds strength of conductor Dielectric strength 2.0 kV Temperature rating -55°C to 150°C [-67°F to 302°F] Insulation resistance 1000 megohms Electrical Performance (typical) D-607 Series Only Frequency VSWR (D-607-09, -40) VSWR (D-607-10) 350 MHz 1.04 max. 1.04 max. 700 MHz 1.05 max. 1.09 max. 2.3 GHz 1.09 max. 1.12 max. 8-58 Catalog 1654025 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 5-12 reference purposes only. unless otherwise specified. Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015