AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are avail- able. For AMPLIMITE .050 Series cable assemblies that meet other impedance requirements or other lengths consult TE. SCSI-2 SCSI-1 to SCSI-2 RS-232 (Alternate) RS-232 (Alternate) to RS-232 IPI-2 and HIPPI Part Numbers Application Assembly 2 Feet 2 Meters 3 Meters 50 pos. .050 Series Plug to SCSI-2 750254-1 5750254-2 750254-3 50 pos. .050 Series Plug 68 pos. .050 Series Plug to SCSI-2* — 5750732-2 5750732-4 68 pos. .050 Series Plug RS-232 26 pos. .050 Series Plug to — 750255-2 750255-3 (Alternate) 26 pos. .050 Series Plug Part Numbers Application Assembly 5 Meters 15 Meters 25 Meters IPI-2 and 100 pos. .050 Series Plug to 749755-2 —— HIPPI 100 pos. .050 Series Plug *This version has spring latches. Consult TE for availability of jackscrew version. Note: .050 centerline ribbon cable assemblies are available in single or double ended versions. These assemblies are made using AMPLIMITE .050 Series panel mount connectors, AMPLIMITE .050 Series all-plastic connectors and AMP-LATCH Novo receptacles. Consult TE. SCSI—Small Computer Systems Interface HIPPI—High Performance Parallel Interface IPI—Intelligent Peripheral Interface Note: All part numbers are RoHS compliant. 6 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Right-Angle Receptacle Headers, Series III .463 [11.76] ±.003 .118 ±0.08 [3.00 ] K G Materials: E Housing — Thermoplastic, 94V-0 Position 1 rated, black. SMT compatible F .050 .100 Typ. Shell — Steel, plated bright nickel over [1.27] [2.54] copper Typ. Bracket — Zinc, plated nickel over .406 copper [10.31] Contacts — Phosphor bronze, duplex plated [.000030] 0.00076 min. gold on 2-56 UNC 2B Holes Last Position mating end; tin on solder end; all under- plated nickel Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. Technical Documents: Product Specifications — 108-1228 Application Specifications — 114-40029 Shown With Boardlocks Shown With Boardlocks Shown With Boardlocks Part Numbers w/ Rails and Latchblocks w/o Rails, w/ Latchblocks w/o Rails, w/o Latchblocks Dimensions No. of With .100 [2.54] With .100 [2.54] With .100 [2.54] With .120 [3.05] Pos. EF G K Solder Tails Solder Tails Solder Tails Solder Tails Without With Without With Without With With Boardlocks Boardlocks Boardlocks Boardlocks Boardlocks Boardlocks Boardlocks 1.580 .950 1.815 1.415 40 — 1761028-2 — 5787082-3 — 5787170-4* — 40.13 24.13 46.10 35.94 1.830 1.200 2.065 1.665 50 5787190-5 1761028-3 5787394-5 5787082-5 — 5787170-5* 5787362-5* 46.48 30.48 52.45 42.29 1.830 1.200 2.065 1.665 50 — 5787266-5* — 5787395-5* —— — 46.48 30.48 52.45 42.29 2.280 1.650 2.515 2.115 68 5787190-7 1761028-4 5787394-7 5787082-7 5787169-7* 5787170-7* 5787362-7* 57.91 41.91 63.88 53.72 3.080 2.450 3.315 2.915 100 — 1761028-5 — 5787082-9 5787169-9* 5787170-9* 5787362-9* 78.23 62.23 84.20 74.04 *Has 4-40 threaded mating holes (2 places), for use with female screwlock Part No. 750644-1. Note: All part numbers are RoHS compliant. 7 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers With Through-Hole Tails, Series III L P Position 1 Position 2 Position 3 .406 .350 [10.31] [8.89] Materials: Housing—Thermoplastic, 94V-0 rated, 2-56 Threaded black. SMT compatible .100 Last Position Hole 2 Plc. [2.54] Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on R mating end; tin on solder end; all under- M plated nickel Technical Documents: ±.015 .125 ±0.38 .351 Product Specifications—108-1228 [3.18 ] [8.92] Application Specifications— 114-40029 .150 Note: Extra pin contact protection is provided [3.81] by rails, which facilitate a straight-out, unmat- ing motion. A side-to-side rocking motion Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. should not be used to disengage the connector system. Part Number 749069-5 Part Number 749721-5 Part Number 749070-7 Dimensions Part Numbers No. of Pos. LM P R w/ Rails & Latchblocks w/ Latchblocks Plain 1.080 .915 .450 1.315 20 5749069-1 —— 27.43 23.24 11.43 33.40 1.230 1.065 .600 1.465 26 5749069-2 —— 31.34 27.05 15.24 37.21 1.280 1.115 .650 1.515 28 — 5749721-3 — 32.51 28.32 16.51 38.48 1.580 1.415 .950 1.815 40 5749069-4 —— 40.13 35.94 24.13 46.10 1.830 1.665 1.200 2.065 50 5749069-5 5749721-5 5749070-5 46.48 42.29 30.48 52.45 2.280 2.115 1.650 2.515 68 5749069-7 5749721-7 5749070-7 57.91 53.72 41.91 63.88 2.580 2.415 1.950 2.815 80 5749069-8 —— 65.53 61.34 49.53 71.50 3.080 2.915 2.450 3.315 100 5749069-9 — 5749070-9 78.23 74.04 62.23 84.20 Note: All part numbers are RoHS compliant. 8 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers With Through-Hole Tails, Series III (Continued) .120 [3.05] Solder Tail A Length D .763 .050 Position 1 [19.38] [1.27] Typ. Typ. Typ. 2-56UNC-2B 4 Holes ±.008 B ±0.20 [ ] C ±.007 .120 ±0.18 Last Position [3.05 ] E Typ. Typ. Rails and Latch Blocks Materials: Housing—Thermoplastic, 94V-0 rated, black. SMT compatible Shell—Steel, plated bright nickel over copper A Bracket—Zinc, plated nickel over copper D .763 .050 Position 1 [19.38] [1.27] Contacts—Phosphor bronze, duplex Typ. Typ. Typ. plated .000030 [0.00076] min. gold on 4-40UNC-2B mating end; tin on solder end; all under- 4 Holes plated nickel ±.008 B ±0.20 C [ ] Related Product Data: ±.007 .120 Required Hardware—page 26 Last Position ±0.18 E [3.05 ] Typ. Typ. Technical Documents: Flat Top Configuration Product Specifications—108-1228-1 Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. Application Specifications— 114-40029 Note: Extra pin contact protection is provided by rails, which facilitate a straight-out unmat- ing motion. A side-to-side rocking motion should not be used to disengage the connector system. Dimensions No. of Part No. Pos. ABCD E 2.085 .874 .500 1.830 1.200 50/50 5787656-1 52.96 22.20 12.70 46.48 30.48 2.535 1.124 .750 2.280 1.650 68/68 5787678-1 64.39 28.55 19.05 57.91 41.91 2.535 1.124 .750 2.280 1.650 * 68/68 5787679-1* 64.39 28.55 19.05 57.91 41.91 *Flat-top configuration. Note: All part numbers are RoHS compliant. 9 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers, Series III, with ACTION PIN Contacts (.050 x .100 [1.27 x 2.54] Centerlines) Product Facts  Recognized under the Component Program of the Underwriters R Laboratories, Inc., File No. E28476  Certified by Canadian Standards Association, R File No. 1088108 (LR 7189A-207)  Produced under a Quality Management System certified to ISO 9001  A copy of the certificate is available upon request Shielded AMPLIMITE .050 Principle of the AMPLIMITE .050 AMPLIMITE .050 Series Technical Documents: Series headers with Series Compliant ACTION PIN compliant ACTION PIN Product Specification— ACTION PIN contacts offer Contact contact, the residual force 108-1228-2 a high-density D type of the elastic deformation When an AMPLIMITE .050 Application Specification— interface, and a solderless maintains stored energy to Series compliant 114-40029 board-mount interconnection. produce a gas-tight contact ACTION PIN contact is These vertical mount zone between the pin and Instruction Sheets— inserted into a plated- headers are available in the plated-through-hole. 408 6923—AMP Manual Arbor through-hole, two spring 20, 26, 50, 68 and 100 This ensures long term Frame Assembly members are compressed, contact sizes. Choice of electrical and mechanical 408 9027—AMP Adapter Kit for exerting force against configurations includes; reliability of the Greenerd Frame Assemblies 3A and 3B the hole for a gas-tight headers with rails and latch interconnection. 408 9757—Seating Instructions connection. The diameter blocks, with latch blocks and Tooling of the hole is smaller than only, and without rails and 408 6927—Recommendations for the diagonal size of the pin. latch blocks. pc board support The beam characteristics of ACTION PIN contact tails the pin are designed so that are available in two lengths; a plastic, as well as an .173 [4.39] for pc boards elastic, deformation takes with a nominal thickness of place during insertion. .062 [1.56] to .093 [2.36], The two spring members and .280 [7.11] for pc compress to different boards with a nominal degrees to accommodate thickness of .125 [3.18] hole tolerances. The to .200 [5.08]. compliant pin also reduces AMPLIMITE .050 Series strain on the board. With a headers with ACTION PIN rigid pin, the elastic strain contacts are compatible energy is stored entirely in with SCSI-2, SCSI-3, EIA the board, leading to RS-232, IPI-2 and HIPPI damage of the plated- standards. through holes. With the 10 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 ISO 9001 Certified AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers, with ACTION PIN Tails, Series III P Position 2 Position 1 2-56 Thread .406 [10.31] 2 Plc. Last Position L Materials: Housings—Thermoplastic, 94V-0 .350 [8.89] rated, black, SMT compatible R Typ. Shell—Carbon steel, plated bright tin .275 M Typ. [2.98] over copper Mating Face Typ. Bracket—Zinc, plated nickel over copper .351 Contacts—Phosphor bronze, duplex Typ. ±.015 [8.92] S ±0.38 plated .000030 [0.00076] min. gold on [ ] mating end; tin on solder end; all under- .150 plated nickel [3.81] Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. Technical Documents: Product Specifications— 108-1228-2 Application Specifications— 114-40029 Note: Extra pin contact protection is provided by rails, which facilitate a straight-out unmat- ing motion. A side-to-side rocking motion should not be used to disengage the connector system. Part Number 786554-1 Part Number 786554-7 Part Number 786155-7 Dimensions Part Numbers No. of Pos. L M PRS w/ Rails & Latchblocks w/ Latchblocks Plain 1.080 .915 .450 1.315 .173 20 5786554-1 —— 27.43 23.24 11.43 33.40 4.39 1.230 1.065 .600 1.465 .173 26 5786554-2 —— 31.34 27.05 15.24 37.21 4.39 .173 5786554-5 5786155-5 5786555-5 4.39 1.830 1.665 1.200 2.065 50 46.48 42.29 30.48 52.45 .280 5786556-5 —— 7.11 .173 5786554-7 5786155-7 5786555-7 4.39 2.280 2.115 1.650 2.515 68 57.91 53.72 41.91 63.88 .280 — 786155-7 5786557-7 7.11 3.080 2.915 2.450 3.315 .173 100 5786554-9 — 5786555-9 78.23 74.04 62.23 84.20 4.39 3.580 3.415 2.950 3.815 .173 120 1-5786554-0 —— 90.93 86.74 74.93 96.90 4.39 Note: All part numbers are RoHS compliant. 11 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III Shielded Plugs B .050 [1.27] Typ. .100 [2.54] .224 Typ. ±.003 [5.69] D [±0.08] Shielded Plug ±.003 A [±0.08] Mating Face Shell Typ. ±.010 .588 ±0.25 [14.94 ] Typ. +.003 .327 -.002 +0.08 8.31-0.05 [ ] Housing Wire Lacing Termination Covers Termination Area Materials: Typ. Housing and Covers— Thermoplastic, 94V-0 rated, black or Shielded Plug with Unassembled Wire Lacing Termination Covers gray Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on mating end, tin on termination end, all underplated .nickel Connector With Unassembled Wire Lacing Termination Covers Shell—Steel, plated tin-nickel alloy Part Numbers over nickel over min. copper Dimensions No. of .032-.036 .029-.031 Recommended wire size— Pos. [0.81-0.91] [0.74-0.79] AB D 2 28 AWG [0.08-0.09mm ] or Outer Wire Dia. Black Outer Wire Dia. Gray 2 30 AWG [0.05mm ], solid or .293 .600 .979 26 5750913-2 1-5750913-2 7 strand, with a .029-.036 7.44 15.24 24.87 [0.74-0.89] insulation diameter. .293 1.200 1.579 50 5750913-5 1-5750913-5 7.44 30.48 40.11 .293 1.650 2.029 Technical Documents: 68 5750913-7 1-5750913-7 7.44 41.91 51.54 Product Specifications—108-1228 .373 2.450 2.829 100 — 1-5750913-9 Application Specifications— 9.47 62.23 71.86 114-40029 Notes: 1. Plug connector requires backshell kit for complete assembly. Refer to pages 16-19 for backshell kit part Instruction Sheet—408-9427 numbers. 2. For termination, cover closing and wire lacing tooling, see page 14. Note: All part numbers are RoHS compliant. 12 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued) Shielded Plugs (Continued) B Terminating Cover .050 .588 [1.27] .100 [14.94] Plug Shell [2.54] .224 Shielded Plug with Unassembled [5.69] E Standard Termination Covers Plug Housing D .327 [8.31] Terminating Cover Shielded Plug with Assembled Standard Termination Covers Materials: Shielded Plug with Assembled or Unassembled Standard Termination Covers Housing and Covers— Thermoplastic, 94V-0 rated, black Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. mating end, tin on termination end, all underplated nickel Shell—Steel, plated tin-nickel alloy over nickel over copper 3 Recommended wire size — Connectors With Standard Termination Covers 2 28 AWG [0.08-0.09mm ] or 2 30 AWG [0.05mm ], solid or Dimensions Part Numbers No. of Pos. 7 strand, with a .029-.036 BD E w/Rails & Latchblocks w/Latchblocks [0.74-0.89] insulation diameter. .450 .829 .293 20 5749111-1 5749621-1 11.43 21.06 7.44 Technical Documents: .600 .979 .293 26 1-5749111-0 5749621-2 15.24 24.87 7.44 Product Specifications—108-1228 .650 1.029 .293 Application Specifications— 28 — 5749621-3 16.50 26.14 7.44 114-40029 .950 1.329 .293 40 5749111-3 5749621-4 Instruction Sheet—408-9427 24.13 33.76 7.44 1.200 1.579 .293 50 5749111-4 5749621-5 30.48 40.11 7.44 1.650 2.029 .293 68 5749111-6 5749621-7 41.91 51.54 7.44 1.950 2.329 .373 80 5749111-7 5749621-8 49.53 59.16 9.47 2.450 2.829 .373 100 5749111-8 5749621-9 62.23 71.86 9.47 2.950 3.329 .373 120 5749111-9 1-5749621-0 74.93 84.56 9.47 Notes: 1. Plug connector requires backshell kit for complete assembly and must use round jacketed cable (discrete or laminated). Refer to pages 16-19 for backshell kit part numbers. 2. For termination tooling, see pages 28 & 29. 3. The CHAMPOMATOR 2.5 Automatic Termination Machine will accept diameters as low as .023 [0.58]. Note: All part numbers are RoHS compliant. 13 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued) AMPLIMITE .050 Series Connector Application Tooling for Use with Wire Lacing Termination Covers Manual Arbor Frame Assembly—Part No. 58024-1 Equipped with Cover Lacing Assembly—Part No. 91293-1 (Includes Seating Bars for 50 and 100 Positions). See Table 3 for Seating Bar Part Numbers. Extra Lacing Stations avail- able for use with Lacing Assembly—Part No. 91293-1 Order Lower Tooling Miniature Applicator Frame Assembly Assembly—Part No. 543481-1 Part No. 91295-1 Arbor Frame, Part No. 58024-1 Lower Tooling Assembly Equipped with Cover Closing Kit Equipped with Part No. 543481-1 Part No. 543508-1 Cover Lacing Assembly, Part No. 91293-1 Table Number 3 No. of Seating Bar Pos. Part No. Note: AMP Manual Miniature 26 543494-2 Applicator Frame Assembly, Cover 40 543494-3 Closing Kit, and Staple Insertion Kit 50 543494-1 each must be ordered separately by part number. 68 543502-2 100 543502-1 Seatings Bars Note: All Tooling must be ordered separately by part number. Note: All part numbers are RoHS compliant. 14 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Receptacle Connectors, Series III Shielded Receptacles .592 B Ref. [15.04] Terminating Cover .050 [1.27] E Shielded Receptacle with Assembled Receptacle Housing Termination Covers Receptacle Shell Terminating Cover Materials: Housing and Covers— D Thermoplastic, 94V-0 rated, black Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on mating end, tin on termination end, all Mating Face underplated nickel Shell—Steel, plated bright tin over copper Recommended wire size— 2 28 AWG [0.08-0.09mm ] or 2 30 AWG [0.05mm ], solid or 7 strand, with a .029-.036 [0.74-0.89] insulation diameter. Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 Part Numbers Dimensions No. of Connectors With Standard Termination Covers Pos. BD E Assembled Covers Unassembled Covers .950 1.329 .293 40 —— 24.13 33.76 7.44 1.200 1.579 .293 50 5749210-5 5749699-5 30.48 40.11 7.44 1.650 2.029 .293 68 5749210-7 5749699-7 41.91 51.54 7.44 2.450 2.829 .373 100 — 5749699-8 62.23 71.86 9.47 Notes: 1. Receptacle connector requires backshell kit for complete assembly. Refer to pages 16-19 for backshell kit part numbers. 2. For termination, cover closing and wire lacing tooling, see page 14. 3. For Termination Tooling other than Wire Lacing see pages 28 & 29. Note: All part numbers are RoHS compliant. 15 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews, Series III Cable Supplied Strain Relief Staple By Customer (1 Supplied) Jackscrew 2-56 Thd. (2 Supplied) Machine Screw A Straight Exit Male Jackscrews Connector (Must Be Style A Purchased Separately) B Upper Shield (1 Supplied) C Lower Shield (1 Supplied) Style A Straight Exit Male Jackscrews Strain Relief Cable Supplied (1 Supplied) By Customer Jackscrew 2-56 Thd. (2 Supplied) Straight Exit Male Jackscrews Style B A Machine Screws (4 Supplied) Connector B (Must be Purchased Separately) .404 Upper Shield C [10.26] (1 Supplied) Straight Exit Female Jackscrews Lower Shield Style A (1 Supplied) Style B Straight Exit Male Jackscrews Cable Supplied Strain Relief Staple By Customer (1 Supplied) Materials: Jackscrews—Stainless steel or steel, Jackscrew 2-56 Thd. (2 Supplied) black electroless nickel plated Jackscrew Caps—Polyolefin or PVC, Machine Screw black A 2-56 Screws—Stainless steel Backshell—Zinc, plated nickel over copper Connector (Must Be Strain Relief Staple—Steel, plated Purchased Separately) B tin over nickel Upper Shield (1 Supplied) Technical Documents: C Product Specifications—108-1228 Application Specifications— Lower Shield (1 Supplied) 114-40029 Style A Instruction Sheet—408-9427 Straight Exit Female Jackscrews 16 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews, Series III (Continued) Male with Female with Dimensions No. of Max. Style Pkg. #2-56 #2-56 Pos. O.D. A BC Threads Threads .450 Bulk 5787543-1 1-5787543-7 11.43 1.822 1.830 .456 .400 40 B Bulk 5787543-2 1-5787543-8 46.25 46.48 11.58 10.16 .350 Bulk 5787543-3 1-5787543-9 8.89 .400 Individual 5749080-1 — 10.16 1.270 2.085 .480 50 A 32.26 52.96 12.19 .400 Bulk 5749080-2 — 10.16 1.887 2.645 .660 .550 Bulk 5750752-3 — 47.93 67.18 16.76 13.97 68 B 1.822 2.525 .564 .550 Individual 5786152-3 — 46.28 64.14 14.33 13.97 2.082 3.325 .615 .500 Individual 5749854-1 — 52.88 84.46 15.62 12.70 100 A 1.695 3.325 .595 .500 Individual 5749081-1 — 43.05 84.46 15.11 12.70 Notes: 1. Each backshell kit includes upper and lower backshells, two male or female jackscrews, one strain relief staple and two or four #2-56 screws. All are packaged unassembled. Notes: 2. For Staple Insertion Tooling see page 29. Note: All part numbers are RoHS compliant. 17 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches, Series III Strain Relief Staple (1 Supplied) Cable Supplied by Customer Rear Plug Machine Screw A Spring Latch (2 Supplied) Style A Straight Exit Connector with Latches Upper Backshell, (Must be (1 Supplied) B Purchased Separately) C Lower Backshell (1 Supplied) Style A Straight Exit with Latches Style A Angled Exit Cable Supplied with Latches by Customer Strain Relief Staple (1 Supplied) Machine Screw A Spring Latch (2 Supplied) Connector Upper Backshell (Must be (1 Supplied) B Purchased Separately) Style B C Straight Exit with Latches Lower Backshell (1 Supplied) Materials: Style A Angled Exit with Latches Backshell—Zinc, plated nickel over copper Spring Latch—Stainless steel Cable Supplied 2-56 Screws—Stainless steel by Customer Strain Relief Staple Strain Relief Staple—Steel, plated (1 Supplied) tin over nickel Spring Latch (2 Supplied) A Machine Screw Technical Documents: Product Specifications—108-1228 Connector (Must be Application Specifications— Purchased 114-40029 B Separately) Instruction Sheet—408-9427 Upper Backshell (1 Supplied) Note: Extra pin contact protection is provided by rails on the receptacle, which facilitate a straight-out unmating motion. A side-to-side C rocking motion should not be used to disen- gage the connector system. Lower Backshell (1 Supplied) Style B Straight Exit with Latches 18 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches, Series III (Continued) Straight Exit Angled Exit Dimensions No. of Max. Style Pkg. with with Pos. O.D. A BC Latches Latches 1.290 1.215 .400 .270 20 A Individual 5749190-1 5749199-1 32.77 30.86 10.16 6.86 1.290 1.365 .400 .270 A Individual — 5749609-1 32.77 34.67 10.16 6.86 26 1.290 1.335 .400 .270 B Individual 749608-2 — 32.77 33.91 10.16 6.86 .320 — 5749201-1 8.13 1.290 1.715 .400 40 A Individual 32.77 43.56 10.16 .320 5749192-1 — 8.13 .400 Individual — 5749202-2 10.16 .400 Bulk 5749202-3 — 10.16 1.395 1.965 .480 A 35.43 49.91 12.19 .355 5749193-1 — 9.02 50 Individual .400 5749193-2 — 10.16 .480 Bulk 5749889-3 — 12.19 1.800 1.965 .492 B 45.72 49.91 12.50 .480 Individual 5749889-4 — 12.18 .400 — 5749204-1 10.16 1.405 2.415 .520 68 A Individual 35.69 61.34 13.21 .440 5749195-2 5749204-2 11.18 .420 — 5749205-1 10.67 1.600 2.715 .565 80 A Individual 40.64 68.96 14.35 .500 749196-2 — 12.70 1.725 3.215 .615 .500 100 A Individual 5749197-1 5749206-1 43.82 81.66 15.62 12.70 1.725 3.715 .665 .550 120 A Individual 5749198-1 5749207-1 43.82 94.36 16.89 13.97 Note: All part numbers are RoHS compliant. 19 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Enclosure Kits, With Male Jackscrews, Series III 68-Position Material and Finish: Backshells—Zinc Boot—PVC, black Jackscrews—Stainless steel and PVC, black Staple—Carbon steel, plated tin over nickel Screws—Stainless steel, #2-56 threads Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 .550 [13.97] Max. Dia. Cable Supplied by Customer 1.887 [47.93] Connector (Must be Purchased 2.645 Separately) [67.18] .660 .520 [16.76] [13.21] No. of Part Number Part Number Pos. Male 2-56 Jackscrews Male 4-40 Jackscrews 68 5750752-1 5750752-2 Notes: 1. Each enclosure kit contains two backshells, one boot, two jackscrews, one staple and two screws. All are packaged unassembled. 2. For staple insertion tooling see page 29. 3. Meets SCSI-3 standards. Note: All part numbers are RoHS compliant. 20 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Receptacle Assemblies Without Rails, With Latch Blocks, Series III C Recessed Cavity .050 Identification [1.27] Typ. .406 [10.31] Materials: 2-56 UNC* 2 Plc. Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright nickel over copper E Bracket—Zinc, plated nickel over ±.004 F copper [±0.10] ±.002 Mating Face .201 ±0.05 Contacts—Phosphor bronze, duplex [5.11 ] plated .000030 [0.00076] min. gold on mating end, bright tin in termination .596 area, all nickel underplated [15.14]Ref. Contact Typ. ±.002 Recommended wire size— .170 Typ. ±0.05 2 [4.32 ] 28 AWG [0.08-0.09mm ] or 2 30 AWG [0.05mm ], solid or 7 strand, with a .029-.036 ±.007 Housing D [±0.18] [0.74-0.89] insulation diameter or .050 [1.27] centerline, 28 AWG 2 Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. [0.08-0.09mm ] stranded, PVC, flat ribbon cable. Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 Part Numbers Connectors With Unassembled Dimensions No. of Wire LacingTermination Covers Connectors With Assembled Pos. CD E F .032-.036 .029-.031 StandardTermination Covers [0.81-0.91] [0.74-0.79] Outer Wire Dia. Outer Wire Dia. 1.830 1.629 2.065 1.665 50 1-749656-1 5-786862-5 6-786862-5 46.48 41.38 52.45 42.29 1.830 1.629 2.065 1.665 50 5-750640-1* 5-786865-5* — 46.48 41.38 52.45 42.29 2.280 2.079 2.515 2.115 68 1-749656-2 —— 57.91 52.81 63.88 53.72 3.580 3.379 3.815 3.415 120 6-749656-0 —— 90.93 85.83 96.90 86.74 *Part Numbers 5-750640-1 and 5-786865-5 have 4-40 threaded holes. All others have 2-56 threaded holes. Note: For termination, cover closing and wire lacing tooling, see page 14. Note: For termination tooling other than wire lacing see pages 28 & 29. Note: All part numbers are RoHS compliant. 21 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Flat Top Receptacle Assemblies Without Rails and Latch Blocks, Series III C .050 [1.27] Cavity Terminating Typ. Identification Cover .406 [10.31] 4-40 UNC Receptacle 2 Plcs. Housing Materials: Housing and Termination Covers— E .197 Thermoplastic, 94V-0 rated, black [5.00] Mating Face Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over .592 Ref. copper [15.04] Contacts—Phosphor bronze, duplex ± .002 .170 plated .000030 [0.00076] min. gold on ± 0.05 [4.32 ] mating end; tin on solder end; all nickel Typ. ± .007 D underplated [± 0.18] Recommended wire size— 2 28 AWG [0.08-0.09mm ] or 2 30 AWG [0.05mm ], solid or 7 strand, with a .029-.036 Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. [0.74-0.89] insulation diameter or .050 [1.27] centerline, 28 AWG 2 [0.08-0.09mm ] stranded, PVC, flat ribbon cable Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 Part Numbers Dimensions Pos. Connectors With Assembled No. of CD E Standard Termination Covers 1.830 1.629 2.065 50 5-749877-5 46.48 41.38 52.45 2.280 2.079 2.515 68 5-749877-7 57.91 52.81 63.88 3.080 2.879 3.315 100 5-749877-9 78.23 73.13 84.20 Note: For termination, cover closing and wire lacing tooling, see page 14. Note: For termination tooling other than wire lacing see pages 28 & 29. Note: All part numbers are RoHS compliant. 22 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Plug Assemblies With Rails, Latch Blocks, Series III Plug C .050 Recessed Cavity Typ. [1.27] Identification .406 [10.31] 2-56 UNC 2 Plc. Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black E Bracket—Zinc, plated nickel over ± .004 F copper [± 0.10] ± .002 Mating Face .217 Contacts—Phosphor bronze, duplex ± .001 .024 ± 0.05 [5.51 ] Typ. ± 0.03 [0.61 ] plated .000030 [0.00076] min. gold on mating end, bright tin in termination area, all nickel underplated Recommended wire size— .598 Ref. 2 28 AWG [0.08-0.09mm ] or [15.19] 2 30 AWG [0.05mm ], solid or ± .002 .154 7 strand, with a .029-.036 ± 0.05 [3.91 ] [0.74-0.89] insulation diameter or ± .007 .050 [1.27] centerline, 28 AWG D [± 0.18] 2 [0.08-0.09mm ] stranded, PVC, flat ribbon cable. Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 Dimensions No. of Part Note: Extra pin contact protection is provided Positions Numbers CD E F by rails, which facilitate a straight-out, unmat- 1.830 1.629 2.065 1.665 50 5-749878-5 ing motion. A side-to-side rocking motion 46.48 41.38 52.45 42.29 should not be used to disengage the connector 2.280 2.079 2.515 2.115 system. 68 5-749878-7 57.91 52.81 63.88 53.72 3.080 2.879 3.315 2.915 100 5-749878-9 78.23 73.13 84.20 74.04 Note: All part numbers are RoHS compliant. 23 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Plug Assemblies With Rails, Latch Blocks, Series III (Continued) C .050 Cavity Identification [1.27] Typ. .406 [10.31] 2-56 UNC* 2 Plc. Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on mating end, bright tin in termination E ±.004 area, all nickel underplated F [±0.05] ±.002 Mating Face .201 ±0.05 Recommended wire size— [5.11 ] Typ. 2 28 AWG [0.08-0.09mm ] or 2 30 AWG [0.05mm ], solid or 7 strand, with a .029-.036 .596 [15.14] [0.74-0.89] insulation diameter or Contact ±.002 .170 Typ. Typ. ±0.05 .050 [1.27] centerline, 28 AWG [4.32 ] Typ. 2 [0.08-0.09mm ] stranded, PVC, flat ribbon cable. ±.007 Housing D [±0.18] Technical Documents: Product Specifications—108-1228 Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. Application Specifications— 114-40029 Note: Extra pin contact protection is provided by rails, which facilitate a straight-out, unmat- ing motion. A side-to-side rocking motion should not be used to disengage the connector system. Part Numbers Dimensions No. of Connectors With Assembled Pos. CD E F Standard Termination Covers 1.080 .879 1.315 .915 20 5-749611-2* 27.43 22.33 33.40 23.24 1.230 1.029 1.465 1.065 26 5-749611-1* 31.24 26.14 37.21 27.05 1.830 1.629 2.065 1.665 50 5-749611-5* 46.48 41.38 52.45 42.29 1.830 1.629 2.065 1.665 50 5-750450-1* 46.48 41.38 52.45 42.29 3.080 2.879 3.315 2.915 100 5-749611-9 78.23 73.13 84.20 74.04 * *Part Number 750450-1 has 4-40 threaded holes. All others have 2-56 threaded holes. Note: For termination, cover closing and wire lacing tooling, see page 14. Note: For termination tooling other than wire lacing see pages 28 & 29. Note: All part numbers are RoHS compliant. 24 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Plug Assemblies Unshielded for .025 [0.64] Centerline Ribbon Cable, Series III .050 Typ. Plug Assembly [1.27] ±.003 E [±0.08] Materials: ±.015 .778 Housing and Termination Covers— ±0.38 [19.76 ] Thermoplastic, 94V-0 rated, black Unshielded Plug Housing Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on .423 mating end, bright tin on termination [10.74] end, all over nickel underplating Recommended wire size— .025 [0.64] centerline, 30 AWG Termination .025 2 Cover [0.05mm ] solid or 7 strand, PVC, [0.64] ±.003 flat ribbon cable. F [±0.08] Note: Cable must be approved by TE Engineering. Dimensions No. of Part Pos. No. EF Technical Documents for 1.578 1.578 1 50 5390377-5 5786090-7 only: 40.07 40.07 2.029 2.023 Product Specifications—108-1359 68 5786090-7 51.54 51.30 Application Specifications— Note: Termination Tooling: Manual Arbor Press Part No. 91085-2 or 114-40049 Pneumatic Press Part No. 91112-3, Universal Base Tool Part No. 768338-4, and Connector Specific Kit Part No. 679235-2. Refer to page 29. 1 Accepts 32 AWG Flat Ribbon Cable. Selection of compatible ribbon cable is the responsibility of the user. Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts. A Backshell Kit for 5786090-7 ±.015 B [±0.38] .025 [0.64]C C Unshielded Typ. L Plug ±.020 .682 ±.015 .400 ±0.51 [17.32 ] ±0.38 [10.16 ] .833 [21.16] Typ. Materials: Dimensions No. of Kit Backshell—Thermoplastic, 94V-0 Pos. Part No. AB rated, black 68 787032-7 2.415 [61.34] 2.125 [53.48] Spring Latches—Stainless steel ±.019 .596 ±0.48 [15.14 ] .466 2 Plc. Strain Relief for 5786090-7 [11.84] 4 Plc. .025 [0.64]C C Unshielded L Plug ±.002 .356 ±.003 1.715 ±0.05 [9.04 ] ±0.08 [43.56 ] 68-Position Part No. 787043-7 Materials: Thermoplastic, 94V-0 rated, black ±.009 Note: Pull tab Part No. 88450-8 2.109 ±0.23 [53.57 ] can be used with this strain relief. Note: All part numbers are RoHS compliant. Must be ordered separately. 25 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Hardware and Dust Covers, Series III .187 Screwlock Kits [4.75] Materials: Stainless steel (female) Screwlock (2 Supplied) Steel, zinc plated black (male) .062 Panel [1.57] .177 #2-56 Thd. Related Product Data: [4.50] Used with the following connectors: Male Right-Angle Receptacle Header— Part No. 749086-1 page 7 (Includes two screwlocks) Connector .532 Vertical Receptacle Header— [13.51] pages 8-11 .050 Panel Mount Plug and Receptacle [1.27] Headers—pages 21 & 22 #4-40 Thd. Technical Documents: Product Specifications—108-1228 .187 [4.75] Application Specifications— #2-56 Thd. 114-40029 Screwlock .062 Panel B [1.57] Female (Includes two screwlocks) Dim. Dim. Individual Kits Bulk AB Part No. Part No. .562 .157 Connector 749087-1 — 14.27 3.99 A .380 .157 1 749087-2 749087-3 .050 9.65 3.99 [1.27] .562 .165 749087-4* 749087-8 14.27 4.19 #4-40 Thd. 1 Recommended for right-angle board mount connectors. .187 Dia. [4.75] 2-56 UNC B Min. Deep ±.003 .027 Female Typ. ±0.08 [0.69 ] (Includes two screwlocks) Thread Size Kits Bulk Part No. Part No. AB .110 4-40 750644-1* — 2.79 .090 ±.003 2-56 786585-2 786585-3 .355 .100 2.29 ±0.08 [9.02] [2.54 ] Recommended for pc board mount of panel mount connectors with latches or latches and rails. Permits cable connectors to be spring latch- type or jackscrew-type A Note: All part numbers are RoHS compliant. 26 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Performance Specifications and Technical Documents Performance Specifications for Mating Cycles (Durability): 500 max. Right-Angle, Vertical and .050 Centerline Cable Products Current Rating (30°C T-Rise): 1A max., 50% energized Termination Resistance (Mated): 25 milliohms max. Insulation Resistance: 1000 megohms min. Dielectric Withstanding Voltage: 500 VAC Header Processing Temperature: +220°C max. for 3 minutes Temperature Range: –55°C to 105°C Performance Specifications for Current Rating (30°C T-Rise): 1A max. center four contacts energized (two from top row, two .025 [1.27] Centerline Ribbon from bottom row) Cable Product. Same as above except: Termination Resistance (Mated): 50 milliohms max. Product Specifications: 108-1228 AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied 108-1359 AMPLIMITE .050 Series .025 [0.64] Centerline Connectors 108-1228 AMPLIMITE .050 Series Stacked Connectors 108-1228-2 AMPLIMITE .050 Series ACTION PIN Connectors 108-1228-3 AMPLIMITE .050 Series SBus Connectors Application Specifications: 114-40029 AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied Connectors 114-40049 AMPLIMITE .050 Series .025 [0.64] Centerline Connectors Instruction Sheets: 408-6923 AMP Manual Arbor Frame Assembly 408-6927 TE Design Recommendations for Printed Circuit Board Support Fixture 408-9200 AMP Single Wire Insertion Tool 408-9822 Wire Termination Tooling Kit for CHAMPOMATOR 2.5 Machine 408-9820 AMP Cover Closing and Staple Inserter Kits 408-9663 AMP Mass Insertion Tool 408-9750 AMP Cover Lacing Fixture 408-9757 AMP Tooling Assembly for ACTION PIN Receptacles 408-9817 AMP Manual Miniature Applicator Frame Assembly 408-9427 Round-to-Flat Cable Termination 408-9875 AMP Universal Base Tool for .025 [0.64] C C Connectors L 408-9892 AMP Tool Kit for .025 [0.64] C C Connectors L Customer Manuals: 409-5839 CHAMPOMATOR 2.5 Machine 409-5791 Control Unit for CHAMPOMATOR 2.5 Machine 27 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Application Tooling, Series III Discrete Wire Application Tooling To meet medium to high volume production of dis-crete wire terminations, TE offers the following tooling: The CHAMPOMATOR Model 2.5 Bench Terminating Machine— Part No. 354786-1, used in conjunction with Control Module—Part No. 852423- , ▫ and Tie Bar—Part No. Control Module CHAMPOMATOR Part No. 852423-1 120 VAC 2.5 Machine Tool Kit 762637- (Table No. 1). ▫ 852423-2 100 VAC Part No. 354786-1 852423-3 230 VAC Note: The CHAMPOMATOR 2.5 Machine includes plug and receptacle nests, as well as wire setup gauge. Table Number 1 Connector Tie Bar Size Part No. 20 Pos. 1-762637-1 26 Pos. 1-762637-1 28 Pos. 1-762637-2 40 Pos. 1-762637-3 50 Pos. 1-762637-4 60 Pos. 1-762637-5 68 Pos. 1-762637-6 80 Pos. 1-762637-7 100 Pos. 1-762637-9 120 Pos. 1-762637-0 Discrete Wire Application Tooling For low to medium volume production use the AMP Arbor Frame Assembly— Part No. 58024-1 equipped with Applicator—Part No. 91291-1 for .032-.035 [0.81-0.89] Conductor Insulation O.D. and Appli- cator—Part No. 91291-2 for .029-.032 [0.74-0.81] Conductor Insulation O.D. Note: AMP Arbor Frame Assembly and Applicator Kit must be ordered separately. Arbor Frame Part No. 58024-1 Equipped with Applicator Part No. 91291- ▫ Note: All part numbers are RoHS compliant. 28 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Application Tooling, Series III (Continued) Cover Closing/ Termination Tooling Manual Miniature Applicator Frame Assembly— Part No. 91295-1 This Frame requires Cover Closing Kit—Part No. 543508-1 Cable Staple Tooling To provide cable strain relief use Manual Miniature Applicator Frame Assembly— Part No. 91295-1. This Frame requires Staple Insertion Kit—Part No. 543515-1 to install staples into lower backshells of connector kits Staple Insertion Kit and assemblies. Part No. 543515-1 (For use with Miniature Applicator Frame Assembly Part No. 91295-1) Miniature Applicator Frame Assembly Part No. 91295-1 Equipped with Cover Closing Kit Part No. 543508-1 AMPLIMITE .050 Series Connector Application Tooling for Use with Wire Lacing Terminating Covers Manual Arbor Frame Assembly—Part No. 58024-1 Seatings Bars Equipped with Cover Lacing Assembly—Part No. Table Number 3 91293-1 (Includes Seating No. of Seating Bar Bars for 50 and 100 Positions). Pos. Part No. See Table 3 for Seating Bar 26 543494-2 Part Numbers. 50 543494-1 Extra Lacing Stations avail- 68 543502-2 able for use with Lacing 100 543502-1 Assembly—Part No. 91293-1 Order Lower Tooling Notes: All Tooling must be ordered Assembly—Part No. 543481-1 separately by part number. Two seating bars required per tool assembly. Termination Tooling for .025 [0.64] Centerline Ribbon Cable Arbor Frame, Part No. 58024-1 Equipped with Used with Manual Arbor Cover Lacing Assembly, Part No. 91293-1 Tool Part No. 91085-2, or Pneumatic Arbor Tool Part No. Note: AMP Manual Miniature 91112-3 and Universal Base Applicator Frame Assembly, Cover Tool Part No. 768338-4. Closing Kit, and Staple Insertion Kit each must be ordered separately by part number. No. of Plug/Receptacle Pos. Upper Tooling Kit 50 679235-2 Lower Tooling Assembly 68 Part No. 543481-1 Note: All part numbers are RoHS compliant. 29 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors Product Facts Compact design, profile for the right-angle header 1.230 x .588 [31.24 x 14.94], vertical header 1.230 x .433 [31.24 x 11.00], right-angle stacked headers 1.230 x .803 [31.24 x 20.40] Housings and covers made of UL 94V-0 rated thermo- plastic Headers are compatible with surface mount reflow solder processes Header footprint for right- angle and stacked configura- tions is .100 x .050 [2.54 x 1.27] staggered centerlines Right-angle and stacked headers feature integral boardlocks for positive board retention and grounding Stacked headers reduce overall total header volume by 48% and PC board area by 38% Stacked headers offer optional contact shield for Shielded AMPLIMITE .050 boardlocks for positive board The mating plug connector additional EMI/RFI protection Series, Slimline Connectors retention and grounding. consists of a thermoplastic answer today’s industry housing, preloaded with Plugs preloaded with Right-angle stacked headers requirement for higher insulation displacement insulation displacement provide 52 contacts in a density in a smaller overall contacts (IDC) for fast, reli- contacts (IDC) provide fast, package only .635 [16.13] package. The present line able terminations that offer reliable and economical high, allowing parallel consists of 26 position, greater applied cost sav- terminations (board-over-board) board shielded right-angle, 26 ings. TE offers a choice of spacing of .800 [20.32]. Aesthetically designed back- position right-angle stacked termination equipment to Centerlines between the top shell kits feature easy-to-use PCB receptacle header, and meet your production connector and the bottom finger grip jackscrews to mating 26 position plug requirements. connector measure .335 secure mated connectors connectors. All header, plug [8.51] when compared to The backshell hardware kit Listed and complies with UL and backshell housings are .400 [10.16] on the standard includes a two-piece, aes- 1863, Communication made of UL 94V-0 rated .050 Series stacked headers. thetically designed, thermo- Circuit Accessories, thermoplastic. PCB headers This results in an over-all plastic cover over an inner File No. E81956 R are compatible with surface reduction of total header and outer shield and two, mount reflow solder Certified by volume, in comparison to high strength #2-56 male processes. Right-angle and Canadian Standards the standard AMPLIMITE jackscrews with insulated R stacked PCB headers fea- Association .050 Series header, of 48%, heads (easy finger grip ture con-tact footprints on File No. 1088108 and a comparative reduction caps) to secure mated .100 x .050 [2.54 x 1.27] (LR 7189A-207) in PC board area of 38%. connectors. staggered centerlines. Stacked header board The AMPLIMITE .050
Produced under a Quality The compact design of the retention and stabilization Series, Slimline family of Management System certi- right-angle header package is provided by two board- connectors offers keyed fied to ISO 9001 measures only 1.230 W x locks and four grounding coupling. This feature elimi-
A copy of the .588 D x .300 H [31.24 W x posts. In addition, an nates the problem of mis- certificate is available 14.94 D x 7.62 H] for maxi- optional rear contact shield match mating of plug and upon request mum board real estate con- is available for additional receptacle, particularly in servation. Right-angle PCB EMI/RFI protection. stacked applications. headers feature integral 30 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 ISO 9001 Certified AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Right-Angle Header, Receptacle .118 [3.00] Date Code Marked In Area Indicated .975 [24.77] .588 Position 1 [14.94] Part No. 750823-1 .300 [7.26] Material and Finish .100 1.230 Housing—UL 94V-0 rated thermo- [2.54] [31.24] plastic, black Position 26 Bracket—Zinc, plated tin or tin over copper .263 Metal-Shell—Carbon steel, plated tin [6.680] over copper .050 [1.27] Boardlocks—Copper alloy, tin plated .338 Typ. [8.59] Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on .050 mating end, tin plated on solder end, all [1.27] over nickel .188 Typ. [4.76] .600 [15.24] Notes: 1. Rear panel mounting only. 2. Female screwlocks to be used with connectors mounted to panels having a thickness of .047 [1.19]. 3. See Application Specification 114-40036 for the most up-to-date detailed panel cutout and recommended PC Board hole pattern. 4. Female screwlocks are not included with receptacles and must be ordered separately. See page 33 for screwlock kit information. Note: All part numbers are RoHS compliant. 31 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Shielded Right-Angle Shield Stacked Header, Date Code Marked In Area Indicated Receptacle .168 [4.27] .215 [5.46] 2 Plc. ±.015 .870 ±0.38 [22.10 ] .803 [20.40] Position 1 With Shielding Position 1 .635 Position 26 [16.13] 1.230 [31.24] Position 26 Without Shielding .363 [9.22] .538 .050 Material and Finish: [13.67] [1.27] Typ. Housing—UL 94V-0 rated thermo- plastic, black Bracket—Zinc, plated tin over copper Metal-Shell—Carbon steel, plated tin .050 .188 Typ. over copper [1.27] [4.76] .600 Boardlocks—Copper alloy, tin plated [15.24] Contact Shield—Phosphor bronze, plated tin Shielded Header with Rear Contact Shield Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. on mating end, tin plated on solder end, all over nickel Part Numbers No. of Std. Rcpt. without Rcpt. with 3 Positions Rear Contact Shield Rear Contact Shield 1 2 1 2 Keyed Unkeyed Keyed Unkeyed 26/26 — 5786200-1 5750821-1 5750820-1 1 Lower header unkeyed with 4-40 threaded holes, upper header keyed in keying position 1. See page 33 for keying code. 2 Both headers unkeyed with 4-40 threaded holes. 3 Receptacle includes a metal contact shield for added RFI protection to the rear of the receptacle assembly. Note: See Application Specification 114-40036 for the most up-to-date detailed panel cutout and recom- mended PC Board hole pattern. Note: All part numbers are RoHS compliant. 32 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Cable Connector, Plug Part No. 750833-1 Material and Finish: .275 Housing and Termination Covers— [6.99] UL 94V-0 rated thermoplastic, black Shell—Steel, plated bright tin over copper Contacts—Phosphor bronze, duplex .576 .975 [14.63] [24.77] plated .000030 [0.00076] min. gold on 1.170 mating end, bright tin on termination [29.72] end, all underplated nickel Bracket—Zinc, plated nickel over copper Recommended Wire Size—28 AWG 2 [0.08 mm ] with max. O.D. .032 [0.813]. PVC or polyolefin insulation. Note: Cable Connectors must be used with Backshell Kits. See page 34. Keying Code, Receptacle Keying Code, Plug Position 1 (Up) #2-56 Thread Accessories .170 [4.32] Female Screwlock Kit .142 [3.61] Material—Stainless Steel .170 Note: Female screwlocks to be used with con- [4.32] nectors mounted to panels having a thickness .390 of .047 [1.19] [9.91] #4-40 Thread Part No. Packaging Individually Packed Kit 750831-1 (2 Screwlocks per kit) *Minimum order is 510 kits. Note: All part numbers are RoHS compliant. 33 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Backshell Kits 1.745 [44.32] Material and Finish: Backshells—Copper-nickel alloy 1.250 [31.75] .330 Jackscrews—Steel, plated tin over [8.38] copper, handles covered with ABS, gray Keyed and Unkeyed Inserts—Zinc, plated tin over copper Outside Covers—ABS, gray Connector shown for illustration purposes only, must be purchased separately. .805 Cable Supplied [20.45] By Customer Must Be TE Approved Inner Shell Outer Shell 1.531 [38.89] 1.252 [31.80] .275 Plug Assembly Must Be [6.98] Purchased Separately Backshell Kits Unkeyed Kit Cable Dia. Packaging* Part No. 750850-1 Individually Packed Kit .250-.280 6.35-7.11 750850-2 Bulk Packed Kit .280-.310 750850-3 Individually Packed Kit 7.11-7.87 *Bulk packaging—100 kits per box. Note: All part numbers are RoHS compliant. 34 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors, Application Tooling Discrete Wire Application Tooling To meet medium to high volume production of dis- crete wire terminations, TE offers the following tooling: The CHAMPOMATOR Model 2.5 Bench Terminating Machine— Part No. 354786-1, used in conjunction with Control Module—Part No. 852423-

, and Tie Bar—Part No. Control Module CHAMPOMATOR 1-762637-3. Part No. 852423-1 120 VAC 2.5 Machine 852423-2 100 VAC Part No. 354786-1 852423-3 230 VAC Note: CHAMPOMATOR 2.5 26 Position Machine and Control Module Tie Bar must be ordered separately by 1-762637-3 part number. Wire Setup Gauge Wire Insulation Dia. Part No. in. mm .026-.028 0.66-0.71 763382-3 .029-.031 0.74-0.79 763382-4 .032-.035 0.81-0.89 763382-5 Discrete Wire Application Tooling For low to medium volume production use the TE Arbor Tool—Part No. 58024-1 equipped with Applicator— Part No. 91291-1 and Special Locator—Part No. 543506-1. Arbor Tool Staple Insertion Kit Part No. 58024-1 Part No. 543515-1 Equipped with (For use with Miniature Applicator Cable-to-Shell Staple Applicator Part No. Frame Assembly 91291-1 Tooling (For discrete Part No. 91295-1) wire jacketed cable only) To meet medium to high volume production use TE Pneumatic Crimper— Backshell Tooling and Part No. 312522-3 equipped Cover Tooling with Die Holder Assembly— To assemble backshell into Part No. 58449-1 and Die— plastic housing use Manual Part No. 90437-1 to crimp Miniature Applicator Frame Assembly Miniature Applicator Frame outer backshells onto inner Part No. 91295-1 Assembly—Part No. 91295-1 backshells of connector kits Equipped with Cover Closing Kit equipped with Part No. and assemblies. Part No. 543508-1 543521-1. To assemble upper cover on lower For low volume use Manual cover use Part No. 91295-1 Arbor Tool—Part No. 91085-2, Pneumatic Bench Tool equipped with Part No. equipped with Backshell No. 312522-3 543522-1. Crimper Assembly Tool— (Requires Die Set Holder Part No. 856684-1. No. 58449-1) For tooling information call Tooling Assistance Center 1-800-722-1111. Note: All part numbers are RoHS compliant. 35 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Contact Arrangements, Performance Specifications, Technical Documents—Slimline Connectors A Position 1 Contact Arrangements C B Note: Mating face of receptacle is shown, plug is mirror image. Position No. No. of Pos. AB C 26 13 14 26 Performance Specifications Mating Cycles (Durability): 500 max. Current Rating (30°C T-Rise): 1A max., 50% loading Termination Resistance (Mated): 25 milliohms max. Insulation Resistance: 1000 megohms min. Dielectric Withstanding Voltage: 500 VAC Header Processing Temperature: +220°C max. for 3 minutes Temperature Range: –55°C to +105°C Product Specifications describe technical performance Technical Documents characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1366 Shielded AMPLIMITE .050 Series, Slimline Connectors Application Specifications describe requirements for using the product in its intended application and/or termination infor- mation. They are intended for the Packaging and Design Engineer and the Setup person. 114-40036 Shielded AMPLIMITE .050 Series, Slimline Connectors Instruction Sheets provide instructions for assembling or applying product. They are intended for Manufacturing Assembler or Operator. 408-9663 Mass Insertion Tooling–Part No. 91291-

408-6923 AMP Manual Arbor Frame–Part No. 58024-1 408-9701 Wire Termination Tooling Kit for CHAMPOMATOR 2.5 Machine–Part No. 1-762661-4 408-7777 AMP Manual Arbor Frame w/Slide–Part No. 91085-2 408-9746 Crimper Assembly–Part No. 856684-1 408-9200 Single Wire Insertion Tool–Part No. 58430-1 408-9721 Die Holder Assembly for Pneumatic Crimper– Part No. 58449-

408-9788 Die Assembly–Part No. 90437-1 408-9898 Backshell and Cover Tooling Assemblies– Part No. 543521-1 and 543522-1 Customer Manuals provide information on TE termination equipment. They are intended for Manufacturing Assemblers or Operators. 409-5786 CHAMPOMATOR 2.5 Machine 409-5791 CHAMPOMATOR 2.5 Control Module– Part No. 852423-

409-5822 Pneumatic Crimper–Part No. 312522-3 409-5843 Pneumatic Power Unit Note: All part numbers are RoHS compliant. 36 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connectors, Series III AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Receptacle Assemblies for .025 [0.64] Centerline Ribbon Cable, Series III ±.006 E [±0.15] .050 Typ. [1.27] .406 [10.31] see table ±.015 Materials: .786 ±0.38 [19.96 ] H Housing and Termination Covers— ±.004 Panel Mount ±.002 G [±0.10] .201 Bracket Thermoplastic, 94V-0 rated, black ±0.05 [5.11 ] Shell—Steel, plated bright tin over copper .423 [10.74] Bracket—Zinc, plated nickel over latch ±.002 .170 copper blocks ±0.05 [4.32 ] Contacts—Phosphor bronze, duplex Termination Cover plated .000030 [0.00076] min. gold on Receptacle Housing mating end; tin on solder end; all nickel underplated .025 [0.64] Recommended wire size— ±.003 F .025 [0.64] centerline, 30 AWG [±0.08] 2 2 [0.05mm ] and 32 AWG [0.03mm ] solid or 7 strand, PVC, flat ribbon cable. Selection of compatible ribbon cable is the responsibility of the user. Dimensions No. of Gold Mating Hardware Part No. Pos. Plating EF G H 1.831 1.602 2.066 Technical Documents: N/A 15μ w/ 4-40 threaded holes 1-5390378-5 46.50 40.70 52.47 See customer drawings for 1.831 1.602 2.066 N/A 30μ w/ 4-40 threaded holes 5390378-5 Product Performance criteria. 46.50 40.70 52.47 1.831 1.602 1.664 2.066 w/ latch blocks and flash 2-5390399-5 46.50 40.70 42.27 52.47 4-40 threaded holes 50 1.831 1.602 1.664 2.066 w/ latch blocks and
Recognized under 15μ 1-5390399-5 46.50 40.70 42.27 52.47 4-40 threaded holes the Component Program 1.831 1.602 1.664 2.066 w/ latch blocks and 30μ 5390399-5 of Underwriters 46.50 40.70 42.27 52.47 4-40 threaded holes R Laboratories, Inc., 1.831 1.602 1.664 2.066 w/ latch blocks and 30μ 5390379-5 46.50 40.70 42.27 52.47 2-56 threaded holes File No. E28476 2.281 2.018 2.516 N/A 15μ w/ 4-40 threaded holes 1-5390378-7
Certified by 57.93 51.50 63.90 Canadian Standards 2.281 2.018 2.516 R N/A 30μ w/ 4-40 threaded holes 5390378-7 57.93 51.50 63.90 Association, 2.281 2.018 2.114 2.516 w/ latch blocks and File No. LR 7189 flash 2-5390399-7 57.93 51.50 53.70 63.90 4-40 threaded holes 68 2.281 2.018 2.114 2.516 w/ latch blocks and 15μ 1-5390399-7 57.93 51.50 53.70 63.90 4-40 threaded holes 2.281 2.018 2.114 2.516 w/ latch blocks and 30μ 5390399-7 57.93 51.50 53.70 63.90 4-40 threaded holes Note: Termination Tooling: Manual Arbor Press Part No. 91085-2 or Pneumatic Press Part No. 91112-3, Universal Base Tool Part No. 768338-4, and Connector Specific Kit Part No. 1490479-1. Note: All part numbers are RoHS compliant. 37 Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015