TE CONNECTIVITY 964203-1

Rast 5 Catalogue 1654742 METRIC Dimensions are Rast 5 Revised 5-04 millimetres over inches Table of Contents AMP multifitting Mark II Introduction ……………………………………………………………………………2002 Direct and Indirect Connection 5.0mm Centerline…………………………………2003 Derating Curves ………………………………………………………………………2004 Keying Plan and Cable Exit …………………………………………………………2005 Technical Features……………………………………………………………………2006 Direct Mating Connector System ……………………………………………2007, 2008 Indirect Mating Connector System……………………………………………2009-2011 2 PC Board Frame………………………………………………………………………2012 AMP MONO-SHAPE Introduction ……………………………………………………………………………2013 Connector Versions …………………………………………………………………2014 Tab Connectors ………………………………………………………………………2015 Tab Connectors Keying Plan ………………………………………………………2016 Tab Connector 3-10 Positions ………………………………………………2017-2020 Single Way Connectors ………………………………………………………………2021 Single Way Connectors Keying Plan ………………………………………………2022 PCB Connectors ………………………………………………………………2023-2027 Satellite Connectors …………………………………………………………………2028 Satellite Connectors Keying Plan……………………………………………………2029 Bridge Connectors Keying Plan ……………………………………………………2030 AMP MONO-SHAPE Mark II Introduction ……………………………………………………………………………2031 Technical Data ………………………………………………………………………2032 Keying Plan and Cable Exit …………………………………………………………2033 Tab Connector System ………………………………………………………2034-2035 TAB-BRIDGE Connector System - Short Circuit …………………………………2036 PCB Connector System ………………………………………………………2037-2041 Application Tooling ……………………………………………………………2042-2045 Standard Timer Introduction…………………………………………………………………………… 2046 Interior and Exterior Locking…………………………………………………………2047 Keying Plan ……………………………………………………………………………2048 Housings ………………………………………………………………………2049-2059 Connectors and Contacts ……………………………………………………………2060 2001 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. specified. Values in brackets are metric equivalents. AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Introduction Product Features � Direct Mating Connectors for PC Boards, 2–8 Positions, up to 6 A Current Carrying Capacity � Indirect Mating Connectors, 1–8 Positions, up to 16 A Current Carrying Capacity � Variable Keying � Double Wire Termination possible Tyco Electronics’ newly This system is suitable for a Interior locking options are designed AMP multifitting wide wire size range. available on request. Mark II Connector System Current carrying capacity is Supplied in chain and was developed according 16 A maximum. provided with all keying and to the latest connector Double termination is polarisation ribs, the design standards. possible with 0.5 and 0.5 connectors can be operated 2 2 The requirements of mm or 0.5 and 0.75 mm economically with modern advanced In-Line mating conductors. Application Tooling technology for the Equipment. The connectors are avail- components and contacts of able in 1- to 8-positions pc boards are incorporated (indirect) resp. 2- to 8- in the direct and indirect positions (direct) with an versions of these connector exterior locking device. systems. 2002 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Direct and Indirect Mating Connection, 5.0 mm Centerline Direct Mating Connection, 4 5.0 mm Centerline 3 1 Double Wire Exit 2 Wire Exit 90° 3 Wire Exit 180° 2 4 Cover 5 Exterior Locking Latch 5 6 Keying 1 7 Polarisation 2 6 7 Indirect Mating Connection, 3 4 5.0 mm Centerline 1 Double Wire Exit 2 Wire Exit 90° 3 Wire Exit 180° 4 Cover 5 Exterior Locking Latch 5 6 Keying 1 7 Polarisation 6 2 7 Indirect Mating Connection 3 with Interior Locking, 4 5.0 mm Centerline 1 Double Wire Exit 2 Wire Exit 90° 3 Wire Exit 180° 4 Cover 5 Interior Locking Latch 1 6 Keying 2 7 7 Polarisation 5 6 2003 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Derating Curves Direct Mating Connector I/A System 7 6 Connector: 5 8 positions 4 Material: 3 Brass, tin plated 2 Wire: 2 0.5 mm 1 PC Board: 0 t/°C 0 102030405060708090 100 110 FR4, 2 x 0.35 µm Copper, tin plated Ambient Temperature I/ / /A A Indirect Mating Connector 3 10 System 9 8 Material: Curve 1: 7 Brass, tin plated 2 positions 2 1 Curve 2: 6 Wire: 8 positions 2 0.5 mm (Curve 1 and 2) 5 2 Curve 3: 1.0 mm (Curve 3) 4 positions 4 Mating Part: 3 6.3 x 0.8 mm Tab, Brass, tin plated 2 1 t/ / /ϒ ϒ ϒ ϒC C 0 020406080 100 120 Ambient Temperature Indirect Mating Connector I/A 18 System 21 16 Curve 1: 1 position 14 Material: Curve 2: CuNi2Si, silver plated 12 4 positions Wire: 10 2 1.5 mm , tin plated 8 Mating Part: 6 6.3 x 0.8 mm Tab, Brass, tin plated 4 2 0 t/°C 0 20406080 100 120 140 Ambient Temperature 2004 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Current Current Current Rast 5 AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan and Cable Exit Keying Plan 43 from Mating Direction, Fully-Keyed Version 1 Locking Latch 2 Keying Rib 2 3 Polarisation Rib 4 Cavity Number 1 2 Keyed Version: 05-C according RAST 5 This final keying version will be produced on the Application Tooling Equipment. Cable Exit with Interior and Exterior Locking Cable Exit with Interior Locking Cable Exit with Exterior Locking Direct Mating of a PCB with PC Board Frames 2005 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a – 1 – – 1 – d d b – 2 – – 2 – b – 3 – – 3 – c – 4 – – 4 – – 5 – – 5 – AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Technical Features Technical Data Centerline: 5.0 mm Housing Material: Polyamide, PA 6.6 and PA 6 Standard Colour: Natural Current Voltage: ~ 250 V Air and Creepage Distance: >3.2 mm Flammability Rating: UL 94 V-2 Approvals: VDE, UL Direct Mating Connectors Indirect Mating Connectors No. of Positions: No. of Positions: 2- to 8-positions 1- to 8-positions Contact Material: Contact Material: Brass Brass / CuNi2Si Contact Finish: Contact Finish: Tin plated Tin plated / silver plated Wire Size Range: Wire Size Range: 2 2 2 0.35–1.0 mm 0.35–1.0 mm / 1.0–1.5 mm Temperature Range: Temperature Range: –40 °C up to +105 °C –40 °C up to +130 °C Current Rating: Current Rating: 6 A max. 10 A, up to 4 contacts 16 A Insulation Diameter: Insulation Diameter: 2.8 mm max. 3.0 mm max. Insulation Resistance: Insulation Resistance: >10 MΩ >10 MΩ Mating Force: Mating Force: ≤7 N per contact* ≤6.5 N per contact** Unmating Force: Unmating Force: ≥1.5 N* ≥1.5 N** Product Specification: Product Specification: 108-18653 108-18652 Application Specification: Application Specification: 114-18289 114-18288, 114-18382 *) measured with polished steel **) measured with polished steel plate 1.5 mm thickness tab 6.3 x 0.8 mm 2006 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Direct Mating Connector System Wire Size Range: Technical Data 2 0.35–1.0 mm Current Carrying Capacity (max.): 6 A Part Numbers Part Numbers with Exterior Locking Package with Interior Locking RAST 5 Version Quantity 2 PA 6.6 PA 6 * PA 6.6 PA 6 * 1-1241172-2 1-1534075-2 4,900 – – 1-1241172-3 1-1534075-3 3,136 – – 1-1241172-3 1-1534075-3 3,136 – – 1-1241172-4 1-1534075-4 2,352 – – 1-1241172-4 1-1534075-4 2,352 – – 1-1241172-5 1-1534075-5 1,960 – – 1-1241172-5 1-1534075-5 1,960 – – *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2007 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 1 – – 1 – – 2 – – 2 – – 1 – – 3 – – 3 – – 2 – – 2 – – 3 – – 3 – – 2 – – 4 – – 4 – – 3 – – 3 – – 4 – – 4 – – 5 – – 5 – AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Direct Mating Connector System (continued) Wire Size Range: Technical Data 2 0.35–1.0 mm Current Carrying Capacity (max.): 6 A Part Numbers Part Numbers with Exterior Locking Package with Interior Locking RAST 5 Version Quantity PA 6.6 PA 6* PA 6.6 PA 6 * 1-1241172-6 1-1534075-6 1,568 – – 1-1241172-6 1-1534075-6 1,568 – – 2-1241172-6 2-1534075-6 1,568 – – 1-1241172-7 1-1534075-7 1,372 – – 1-1241172-7 1-1534075-7 1,372 – – 1-1241172-8 1-1534075-8 1,176 – – 1-1241172-8 1-1534075-8 1,176 – – *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2008 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 1 – – 1 – – 1 – – 2 – – 2 – – 2 – – 2 – – 2 – – 3 – – 3 – – 3 – – 3 – – 4 – – 4 – – 3 – – 3 – – 3 – – 4 – – 4 – – 5 – – 5 – – 4 – – 4 – – 4 – – 5 – – 5 – – 6 – – 6 – – 5 – – 5 – – 5 – – 6 – – 6 – – 7 – – 7 – – 6 – – 6 – – 6 – – 7 – – 7 – – 8 – – 8 – Rast 5 AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Indirect Mating Connector System Wire Size Range: Current Carrying Capacity Technical Data 2 (max.): 0.35–1.0 mm 10 A Part Numbers Part Numbers with Exterior Locking Package with Interior Locking RAST 5 Version Quantity PA 6.6 PA 6 * PA 6.6 PA 6 * 2 1-1241170-1 1-1534072-1 9,604 -1241170-1 1-1534072-1 1-1241170-2 1-1534072-2 4,900 1-1394355-2 1-1534077-2 1-1241170-3 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1241170-3 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1241170-4 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1241170-4 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1241170-5 1-1534072-5 1,960 1-1394355-5 1-1534077-5 1-1241170-5 1-1534072-5 1,960 1-1394355-5 1-1534077-5 *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2009 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 1 – – 1 – – 2 – – 2 – – 1 – – 3 – – 3 – – 2 – – 2 – – 1 – – 3 – – 3 – – 2 – – 4 – – 4 – – 3 – – 3 – – 4 – – 4 – – 5 – – 5 – AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Indirect Mating Connector System (continued) Wire Size Range: Current Carrying Capacity Technical Data 2 (max.): 0.35–1.0 mm 10 A Part Numbers Part Numbers with Exterior Locking with Interior Locking Package RAST 5 Version Quantity PA 6.6 PA 6* PA 6.6 PA 6* 1-1241170-6 1-1534072-6 1,568 – – 1-1241170-6 1-1534072-6 1,568 – – 2-1241170-6 2-1534072-6 1,568 – – 1-1241170-7 1-1534072-7 1,372 – – 1-1241170-7 1-1534072-7 1,372 1394355-7 1534077-7 1-1241170-8 1-1534072-8 1,176 – – 1-1241170-8 1-1534072-8 1,176 – – *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2010 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 1 – – 1 – – 1 – – 2 – – 2 – – 3 – – 3 – – 2 – – 2 – – 2 – – 3 – – 3 – – 4 – – 4 – – 3 – – 3 – – 3 – – 4 – – 4 – – 5 – – 5 – – 4 – – 4 – – 4 – – 5 – – 5 – – 6 – – 6 – – 5 – – 5 – – 5 – – 6 – – 6 – – 7 – – 7 – – 6 – – 6 – – 6 – – 7 – – 7 – – 8 – – 8 – Rast 5 AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Indirect Mating Connector System (continued) Wire Size Range: Technical Data 2 1.0–1.5 mm Current Carrying Capacity (max.): 16 A Part Numbers Part Numbers with Exterior Locking Package with Interior Locking RAST 5 Version Quantity 2 PA 6.6 PA 6 * PA 6.6 PA 6 * 1-1241171-1 1-1534073-1 9,604 1--1241171-1 1-1534073-1 1-1241171-2 1-1534073-2 4,900 1-1394556-2 1-1534078-2 1-1241171-3 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1241171-3 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1241171-4 1-1534073-4 2,352 1-1394556-4 1-1534078-4 1-1241171-4 1-1534073-4 2,352 1-1394556-4 1-1534078-4 *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2011 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 2 – – 2 – – 1 – – 2 – – 3 – – 3 – – 3 – – 3 – – 4 – – 4 – AMP multifitting Mark II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PC Board Frame Latching Hole Keying PC Board Frame PC Board B A Dimensions Part Number Additional No. of (mm) Package Keying Latching Polarisation Board Positions PC Board Frame, Quantity Lock AB PA 6.6, Black 2 5 10.1 1c, 2d 1/2 – – 2-964577-2 2,200 1c, 2d, 3c 1/2, 3/4 2b – 1-964577-4 4 15 20.1 1c, 3c, 4d 1/2, 3/4 4b – 2-964577-4 1,700 1c, 3c, 4d 1/2, 3/4 1b, 4a – 3-964577-4 5 20 25.1 3d 1/2, 4/5 – – 1-964577-5 1,500 4d 1/2, 5/6 6b – 1-964577-6 6 25 30.1 1,500 4d 1/2, 5/6 1b, 6a – 2-964577-6 2c, 3d, 7c 2/3, 5/6 1b, 2b 4/5 1-964577-7 7 30 35.1 1,200 2c, 3d, 7c 2/3, 5/6 2b, 7a 4/5 2-964577-7 2c, 3d, 7c 2/3, 7/8 2a 4/5 1-964577-8 8 35 40.1 1,000 2c, 3d, 7c 2/3, 7/8 2b, 4b 4/5 2-964577-8 1c, 2d, 3c, 4d, 1/2, 3/4, 5/6, 2b, 3a, 4a, 6a, 122 55 60.1 4/5, 8/9 1-964578-2 1.500 5c, 8c, 10d, 12d 8/9, 9/10, 11/12 7a, 7b, 8a, 8b Preferred Parts are printed bold 2012 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Introduction AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE connectors represent a valid solution to the ever-increasing requirements for production and application 2 flexibility. They are high productivity, great flexibility, quality, minimum applied cost. AMP MONO-SHAPE product- line includes a full range of 5.0 mm pitch modular connectors contents with similar outer shape, several variation in the mating area such as PC Board and 6.3 x 0.8 mm tabs (RAST 5), plus a version for harness shunts. AMP MONO-SHAPE connection system adopts the IDC termination technology, which improves application results and quality level. The AMP MONO-SHAPE product range, combined with the performances and properties offered by the Technical Features termination system, allow to manufacture extremely � IDC Connector system � The connector incorporates complicated harness structures design to maximise the modern in-line mating while still maintaining high full integration with the technology on a 5.0 mm production levels. application tooling assuring centerline with no loss of total flexibility in harness spacing and a variety of design. keying possibilities. � High current system, up � Wiring faults eliminated to 16 Ampere, designed to through high automation. satisfy several appliance � Approvals: requirements. VDE: 4751-1431-4024 / A � ID Contact designed to 10A and accept standard discrete 4751-1431-4024 / A 9E wires ranging from 0.5 up to UL E 28476 Vol. 9 Sec. 7; 2 1.5 mm , according to the 97 ME 17936; AP-27HB connector configuration. 2013 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE Connector Versions Same Shape - Different Applications With the same outside shape four connector versions are available, which are to handle with the same application tooling. TAB Connectors 2–12 position 5.0 mm pitch Wire Size Range: 2 connectors with insulation 0.5–1.5 mm displacement contacts mateable Current Rating: with components according to 16 Ampere max. acc. to wire size LIF version 2 RAST 5 and with tinned copper point contact alloy tab 6.3 x 0.8 mm -For LIF version up to instead of 4 as 10 Ampere max according to DIN 46244. per standard version Single Way Connectors Single Way connectors with Wire Size Range: 2 insulation displacement 0.5–1.5 mm contacts for use on tinned Current Rating: copper alloy tab 6.3 x 0.8 mm 16 Ampere max. acc. to wire size according to DIN 46244. Supply Status: In order to increase product- ivity these items are supplied in sticks. PCB Connectors 2–12 position 5.0 mm pitch Wire Size Range: 2 0.5–0.75 mm connectors with insulation displacement contacts accor- Current Rating: ding to printed circuit boards 6 Ampere max. acc. to wire size ±0.2 with thickness 1.5 mm and PC Board: 5.0 mm pitch. Single or both sides printed 5 µm tin over 35 µm copper Satellite Connectors 3 position connectors, pitch Wire Size Range: 2 5.0 mm, with short circuited 0.5–1.5 mm insulation displacement Current Rating: contacts for harness shunts. 16 Ampère max. acc. to wire size 2014 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches TAB Connector AMP MONO-SHAPE TAB Connector 1 6 1 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 2 Cavity Numbers 2 3 Polarisation similar to the Keying (Located on the Back Side) 3 4 Keying 5 Interior Locking Latch 5 6 Colour Marking 4 Technical Features Centerline: Voltage Resistance: or FR 3/2 (105 °C max.) 2 5.0 mm, according to RAST 5 according to EN 60998-1 for wires from 1.5 mm with specifications (IEC 998-1) 1750 V for 4 minutes copper or tinned stranded wires Insulation Type: Configurations: Insulation Resistance: PVC suitable for temperatures 2- to 12-positions according to EN 60998-1 up to 70 °C / 105 °C (IEC 998-1) >5 MΩ Housing Material: Insulation Diameter Range: Plastic PA 6.6 Wire Size Range: 2.0–3.5 mm 2 from 0.5 to 1.5 mm Housing Colour: Temperature Range: Natural colour for standard Current Rating: –25 °C up to +105 °C version Standard Version Grey colour for LIF version 16 A max. according to wire Wire Extraction Force/Way: 2 size 50 N min. on wire size 0.5 mm Contact Material: 2 2 0.5 mm ≤3 A, 0.75 mm ≤6 A, Copper alloy, post-tinned Application Specification: 2 2 1.0 mm ≤10 A, 1.5 mm ≤16 A 2.0 µm min. 114-20016 LIF Version Polarisation, Keying, Product Specification: 10 A max. according to wire Locking Latches: Standard version: 108-20065 size according to RAST 5 LIF version: 108-20215 2 2 0.5 mm ≤3 A, 0.75 mm ≤6 A, specifications Homologations: 2 2 1.0 mm ≤10 A, 1.5 mm ≤10 A (see customer drawings) acc.to VDE File No. 3905 Rated Voltage: Track Resistance: (to 16 A) and UL File No. 380 Volts max. as per IEC 112 (250 V) E28476 (to 14 A) Wire Type: Glow Wire Test: H05V-K (70 °C max.) as per IEC 695-2-1 (850 °C) or FR 3/2 (105 °C max.) and 750°C no flame 2 for 0.5–1.0 mm wires with Air and Creepage Distance: copper or tinned stranded wires according to EN 60998-1 H07V-K (70 °C max.) (IEC 998-1) for 380 V, ≥4.0 mm 2015 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan Keying Plan 5 4 from Mating Direction, 1 Locking Latch 2 Slanted Keying Rib 3 Keying Rib 4 Polarisation Rib 5 Cavity Number AMP MONO-SHAPE 2 1 3 TAB Connector 2 Position RAST 5 Variations (Variable Keying)* Part Packaging Numbers Unit Suitable for RAST 5 Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 02-B 02-E 1-282002-2 2-282002-2 3-282002-2 02-F 6.500 3.500 28.500 1-284338-2 2-284338-2 — Grey 02-C 1-282002-1 2-282002-1 2-282002-1 6.500 3.500 28.500 1-284338-1 2-284338-1 — Black 02-L 1-282002-3 2-282002-3 — 02-P 6.500 3.500 28.500 1-284338-3 2-284338-3 3-284338-3 Red 02-A 1-282002-4 2-282002-4 — 02-O 6.500 3.500 — 1-284338-4 — — Blue 02-Q 1-282002-5 2-282002-5 — 6.500 3.500 — Black — 1-282002-6 2-282002-6 — 6.500 3.500 — Black — 1-282002-7 2-282002-7 3-282002-7 6.500 3.500 28.500 1-284338-7 — — — * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2016 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. ca c c – 1 – – 1 – – 1 – a – 2 – – 2 – – 2 – d d b db c a – 1 – – 2 – d – 3 – – 4 – c – 5 – b – 6 – – 7 – Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE TAB Connector 3 Position RAST 5 Variations (Variable Keying)* Part Packaging Numbers Unit Suitable for RAST 5 Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 2 03-A 1-282003-1 2-282003-1 3-282003-1 03-I 4.160 2.500 24.000 1-284339-1 2-284339-1 — Orange 03-B 1-282003-2 2-282003-2 3-282003-2 03-K 4.160 2.500 24.000 1-284339-2 2-284339-2 — Blue 03-F 1-282003-3 2-282003-3 — 4.160 2.500 — 1-284339-3 2-284339-3 — Green 03-D 282233-2 282233-2 — 4.160 2.500 — – 03-B 1-282003-4 2-282003-4 — 03-K 4.160 2.500 — 1-284339-4 2-284339-4 — Red 03-B 1-282003-5 2-282003-5 — 03-K 4.160 2.500 — 1-284339-5 2-284339-5 — Grey — 1-282003-6 2-282003-6 — 4.160 2.500 — Violet 03-B 1-282003-7 — — 4.160 — — Black — 1-284396-1 — — 4.160 — — Black * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2017 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. a a c c c c c c c – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – d d d b d c c c c – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – b b b b d d c c c – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – d b d b d b d d b d b d AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE TAB Connector 4 Position RAST 5 Variations (Variable Keying)* Part Packaging Numbers Suitable for RAST 5 Version Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 04-A 1-282004-1 2-282004-1 3-282004-1 2.120 2.000 18.750 Grey 04-D 1-282004-2 2-282004-2 3-282004-2 2.120 2.000 18.750 Black 04-A 1-282004-3 2-282004-3 — 2.120 2.000 — Red 5 Position RAST 5 Variations (Variable Keying)* Part Packaging Numbers Unit Suitable for RAST 5 Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel Red 1-282005-1 2-282005-1 — 2.600 1.500 18.750 Red 1-284545-1 — — 2.600 1.500 18.750 * Final keying version is produced on the Application Tooling Machines. 2018 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c – 1 – c c d c – 1 – – 1 – – 1 – c b b d – 2 – c – 2 – – 2 – – 2 – d d c c – 3 – d – 3 – – 3 – – 3 – d b c c – 4 – – 4 – – 4 – d b – 4 – d d d c – 5 – d Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE TAB Connector 6 Position RAST 5 Variations (Variable Keying)* Part Packaging Suitable for RAST 5 Version Numbers Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 2 Violet 1-282006-1 2-282006-2 3-282006-2 2.080 1.200 13.500 — 1-282006-3 2-282006-3 3-282006-3 2.080 1.200 13.500 Red 1-284745-1 — — 2.080 — — 7 Position RAST 5 Variations (Variable Keying)* Part Packaging Suitable for RAST 5 Version Numbers Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel — 1-282007-1 2-282007-1 — 1.820 1.200 — Black 1-284397-1 — — 1.820 1.200 — 2019 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c b d c d c d c b d c d – 1 – – 2 – – 3 – – 4 – – 5 – – 6 – – 7 – AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE TAB Connector 8 Position RAST 5 Variations (Variable Keying)* Part Packaging Suitable for RAST 5 Version Numbers Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 284085-1 2-284085-1 — — 1.560 900 — 1-284685-1 2-284685-1 — Violet 284085-2 2-284085-2 — 1.560 900 — * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 10 Position RAST 5 Variations (Variable Keying)* Part Packaging Suitable for RAST 5 Numbers Unit Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282010-1 2-282010-1 — — 1.300 700 — 1-284686-1 2-284686-1 — * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2020 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c d c c d c d c d c d b c d c d c d b d b c c d d c a c a d b c d d c c d d – 1 – – 2 – – 1 – – 3 – – 2 – – 4 – – 3 – – 5 – – 4 – – 6 – – 5 – – 7 – – 6 – – 8 – – 7 – – 9 – – 8 – –10 – Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE Single Way Connector Single Way Connector 1 2 1 All Single Way Connectors are supplied in “stick-form” by 6 single ways each. They will be cut from the Application Tooling Machines 2 2 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 3 Polarisation similar to the keying of the front side 3 4 Keying 5 Plastic Noses which Lock into the TAB Hole 6 Colour Marking 5 4 Technical Features Centerline: Voltage Resistance: Insulation Type: 5.0 mm, according to RAST according to EN 60998-1 PVC suitable for temperatures 5 specifications (IEC 998-1) 1750 V for 4 up to 70 °C / 105 °C minutes Configurations: Insulation Diameter Range: 1 position Insulation Resistance: 2.0–3.5 mm according to EN 60998-1 Housing Material: Temperature Range: (IEC 998-1) >5 MΩ Plastic PA 6.6 –25 °C up to +105 °C Wire Size Range: Housing Colour: Wire Extraction Force/Way: 2 from 0.5 to 1.5 mm 2 Natural colour 50 N min. on wire size 0.5 mm Current Rating: Contact Material: Application Specification: 16 A max. according to wire Copper alloy, post-tinned 114-20017 size 2.0 µm min. Product Specification: 2 2 0.5 mm ≤3 A, 0.75 mm ≤6 A, Polarisation, Keying, 108-20066 2 2 1.0 mm ≤10 A, 1.5 mm ≤16 A Locking Latches: Homologations: Rated Voltage: according to RAST 5 acc.to VDE File No. 3905 380 Volts max. specifications (to 16 A) and UL File No. (see customer drawings) Wire Type: E28476 (to 14 A) H05V-K (70 °C max.) Track Resistance: Counter Part: or FR 3/2 (105 °C max.) as per IEC 112 (250 V) Tab 6.3 x 0.8 mm 2 for 0.5–1.0 mm wires with Glow Wire Test: as per DIN 46244 norms copper or tinned stranded wires as per IEC 695-2-1 (850 °C) Materials: H07V-K (70 °C max.) and 750°C no flame Copper alloy or FR 3/2 (105 °C max.) Air and Creepage Distance: 2 Finishing: for wires from 1.5mm with according to EN 60998-1 Tinned (6.0 µm max.) copper or tinned stranded wires (IEC 998-1) for 380 V, ≥4.0 mm 2021 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan from Mating Direction Keying Plan 2 1 Keying Rib 3 2 Polarisation Rib 3 Cavity Number 1 AMP MONO-SHAPE Single Way Connector 1 Position (Variable Keying)* Part Packaging Numbers Suitable for RAST 5 Version Unit RAST 5 Version Colour Marking On Tray On Reel On Tray On Reel — — 1-282086-1 1.024 10.500 Black — 1-282086-2 1.024 — Orange — 1-282086-3 1.024 — Green — 1-282086-4 1.024 — Blue — 1-282086-5 1.024 — Violet — 1-282086-6 1.024 — 2022 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c c ca – 1 – – 1 – – 1 – db d d ca – 1 – d Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector 1 1 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 2 Cavity Numbers 3 Keying Slot in PC Board 2 5 4 Locking Hole in PC Board 5 Colour Marking 4 3 Technical Features Centerline: Voltage Resistance: Insulation Type: 5.0 mm according to EN 60998-1 PVC suitable for temperatures (IEC 998-1) 1750 V for 4 up to 70 °C / 105 °C Configurations: minutes 2-12 positions Insulation Diameter Range: Insulation Resistance: 2.0–2.8 mm Housing Material: according to EN 60998-1 Plastic PA 6.6 Temperature Range: (IEC 998-1) >5 MΩ –25 °C up to +105 °C Housing Colour: Wire Size Range: Natural colour Wire Extraction Force/Way: 2 from 0.5 to 0.75 mm 2 50 N min. on wire size 0.5 mm Contact Material: Current Rating: Copper alloy, post-tinned Application Specification: 6 A max. according to wire size 2.0 µm min. 114-20025 2 2 0.5 mm ≤3 A, 0.75 mm ≤6 A Polarisation, Keying, Product Specification: Rated Voltage: Locking Latches: 108-20067 220 Volts max. according to RAST 5 Homologations: specifications Wire Type: acc.to VDE File No. 3905 (see customer drawings) H05V-K (70 °C max.) (to 6 A) and UL File No. E28476 or FR 3/2 (105 °C max.) Track Resistance: (to 6 A) 2 for 0.5–1.0 mm wires with as per IEC 112 (250 V) Printed Circuit Board: copper or tinned stranded wires ±0.2 Glow Wire Test: Thickness 1.5 mm H07V-K (70 °C max.) as per IEC 695-2-1 (850 °C) Tinned Circuit Paths: or FR 3/2 (105 °C max.) and 750°C no flame 5.0mm pitch and width of 2 for wires from 1.5mm with Air and Creepage Distance: 1.8mm copper or tinned stranded wires according to EN 60998-1 (IEC 998-1) for 240 V, ≥3.0 mm 2023 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Wire Exit PCB Connector 1 1 2 5,0 1 PC Board 2 First Circuit Path 3 3 MONO-SHAPE Connector 4 Wire 23,0 15,0 4 14,0 Notes Concerning the PC Board Layout 4 1 1 First circuit path 2 2 Slot for keying rib in front of first cavity (according to the connector 4.0 mm or 7.4 mm) 3 Bore hole for locking clip symmetric between two cavities (diameter 2.5 mm) 3 4 Slot for keying rib symmetric between two cavities PC Board Layout Dimensions on request. See Customer Drawing 282042 2024 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm Part Packaging No. of Positions Numbers Unit PC Board Cut-Out Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 2 1-282042-1 2-282042-1 — 5.980 3.500 — Brown 2 2 1-282042-2 2-282042-2 3-282042-2 5.980 3.500 28.500 Green 2 1-282042-3 2-282042-3 3-282042-3 5.980 3.500 28.500 Blue 2 1-282042-4 2-282042-4 — 5.980 3.500 — Red 2 1-282042-5 2-282042-5 3-282042-5 5.980 3.500 28.500 Black 3 1-282043-2 2-282043-2 3-282043-2 4.160 2.500 24.000 — 3 1-282043-3 2-282043-3 — 4.160 2.500 — Black 3 282235-2 2-282235-2 — 4.160 2.500 — — 3 282235-3 2-282235-3 — 4.160 2.500 — Black 3 1-1284546-1 — — 4.160 — — Blue 4 1-282044-1 2-282044-1 3-282044-1 3.120 2.000 18.750 — 2025 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) Part Packaging No. of Positions Numbers Unit PC Board Cut-Out Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 5 1-282045-1 2-282045-1 3-282045-1 2.600 1.500 18.750 — 5 1-282045-2 2-282045-2 3-282045-2 2.600 1.500 18.750 Green 5 1-282045-3 2-282045-3 3-282045-3 2.600 1.500 18.750 — 5 1-284733-1 2-284733-1 3-284733-1 2.600 1.500 18.750 — 6 1-282046-1 2-282046-1 3-282046-1 2.080 1.200 13.500 — 6 1-284734-1 2-284734-1 3-284734-1 2.080 1.200 13.500 — 7 1-282047-1 2-282047-1 3-282047-1 1.820 1.200 13.500 — 8 284208-1 2-284208-1 — 1.560 900 — — 8 284574-1 — — 1.560 — — — 9 1-282049-1 2-282049-1 3-282049-1 1.300 700 10.500 — 10 1-282050-1 2-282050-1 3-282050-1 1.300 700 10.500 — 2026 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) Part Packaging No. of Positions Numbers Unit PC Board Cut-Out Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 10 1-284401-1 — — 1.300 — — Black 2 10 284575-1 — — 1.300 — — — 11 1-282051-1 2-282051-1 3-282051-1 1.040 700 10.500 — 12 1-282052-1 2-282052-1 3-282052-1 1.040 700 10.500 — 2027 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches AMP MONO-SHAPE Satellite Connector Satellite Connector 1 1 Cover closed after Wire 2 Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 Bridge between Contacts to have Short Circuit 3 Cavity Numbers 4 For Satellite version, the cavity 1 only accept TAB contact, other cavities are clogged 3 4 Technical Features Centerline: Air and Creepage Distance: H07V-K (70 °C max.) 5.0 mm, according to RAST 5 according to EN 60998-1 or FR 3/2 (105 °C max.) 2 specifications (IEC 998-1) for 380 V, ≥4.0 mm for wires from 1.5mm with copper or tinned stranded wires Configurations: Voltage Resistance: Insulation Type: 3 positions only (for special according to EN 60998-1 PVC suitable for temperatures version please contact Tyco (IEC 998-1) 1750 V for 4 up to 70 °C / 105 °C Electronics) minutes Insulation Diameter Range: Housing Material: Insulation Resistance: 2.0–3.5 mm Plastic PA 6.6 according to EN 60998-1 (IEC 998-1) >5 MΩ Temperature Range: Housing Colour: –25 °C up to +105 °C Natural colour Wire Size Range: 2 from 0.5 to 1.5 mm Wire Extraction Force/Way: Contact Material: 2 50 N min. on wire size 0.5 mm Copper alloy, post-tinned Current Rating: 2.0 µm min. 16 A max. according to Application Specification: wire size 114-20026 Polarisation, Keying, 2 2 0.5 mm ≤3 A, 0.75 mm ≤6 A, Locking Latches: Product Specification: 2 2 1.0 mm ≤10 A, 1.5 mm ≤16 A according to RAST 5 108-20070 specifications Rated Voltage: Homologations: (see customer drawings) 380 Volts max. acc.to VDE File No. 3905 Track Resistance: Wire Type: (to 16 A) and UL File No. as per IEC 112 (250 V) H05V-K (70 °C max.) E28476 (to 14 A) or FR 3/2 (105 °C max.) Glow Wire Test: 2 for 0.5–1.0 mm wires with as per IEC 695-2-1 (850 °C) copper or tinned stranded wires and 750°C no flame 2028 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan from Mating Direction 3 Keying Plan 4 1 Locking Latch 2 Keying Rib 3 Polarisation Rib 4 Cavity Number 2 1 2 AMP MONO-SHAPE - 3 Position Satellite Connector (Variable Keying)* Part Packaging Numbers Suitable for RAST 5 Version Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 03-A 03-I 1-282099-1 — — 4.160 — — Black AMP MONO-SHAPE - 2 Position Satellite Connector (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 to have Short Circuit 02-L 02-P 1-284288-1 284288-1 — 6.500 — — — 02-L 02-P — 284288-2 — — 3.000 — Orange 02-L 02-P 1-284288-3 284288-3 — 6.500 3.000 — Blue 02-L 02-P — 284288-4 — — 3.000 — Green 02-L 02-P — 284288-5 — — 3.000 — Violet 02-L 02-P 1-284288-6 284288-6 — 6.500 3.000 — Black 02-C — 284288-7 — — 3.000 — — * Final keying version is produced on the Application Tooling Machines. 2029 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c – 1 – c c c c c c c b – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 2 – a d – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – c d db db db db db db – 3 – d c a – 1 – – 2 – – 3 – – 4 – c – 5 – b – 6 – – 7 – AMP MONO-SHAPE Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan from Mating Direction AMP MONO-SHAPE Bridge Connector - 3 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit Part Packaging Suitable for RAST 5 Version Numbers Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel 03-A 03-I — 284289-1 — — 2.500 — Green AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit Part Packaging Numbers Unit Suitable for RAST 5 Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel — — 284290-1 — — 1.200 — Green AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 and 3-4 to have Short Circuit Part Packaging Numbers Suitable for RAST 5 Version Unit RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel — — 284290-2 — — 1.200 — Black AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3-4-5-6 to have Short Circuit Part Packaging Numbers Unit Suitable for RAST 5 Version RAST 5 Version Colour Marking On Tray Loose Piece On Reel On Reel Loose Piece On Reel — 1-284744-1 — — 2.080 — — — * Final keying version is produced on the Application Tooling Machines. 2030 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c – 1 – b – 2 – d c – 3 – d Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Introduction AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology MONO-SHAPE Mark II Connector System was developed according to the newest level of knowledge and 2 standard. The requirements of advanced In-Line mating technology for the component and contact of printed circuit board (PCB) is granted by the two versions TAB and PCB connector systems. System is designed to maximise the full integration with the application tooling, assuring the flexibility in the harness design. This system is suitable for a wide wire size range of conductor and current carrying capacity up to 16 A. Double termination is possible 2 with 0.5 and 0.5mm or 0.5 and 2 0.75mm conductors. (See application spec. Technical Features 114-20104 for details) The connectors are available in � Housing moulded in different � High Operating Temperature 1 to 10 positions (TAB Version) materials for different (up to 130°), Part Numbers with interior locking device and applications with pre-dash 2 (as 2- 2 to 12 positions (PCB Version) 284471-1) Unfilled PA 4/6, � Standard, Part Numbers with UL 94V-2 (available for TAB Connectors are supplied in pre-dash 0 (as 0-284471-1) Version only) chain and provided with all Housing in unfilled PA 6/6, keying and polarisation ribs the UL 94V-2 � Glow Wire 750° no flame, connectors can be handled Part Numbers with pre-dash � For UL94V0, Part Numbers automatically with a modern 3 (as 3-284471-1) Housing with pre-dash 1 Application Tooling Equipment. in unfilled PA 6, UL 94V-2 (as 1-284471-1) Wiring faults checked and Housing in unfilled PA 6/6, eliminated through high UL 94V-0 automation. Application Machines shall provide to print a colour code mark on the connectors cover after wire termination, feasible on all connectors configuration, for connector identification on harnesses. 2031 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Technical Data Centerline: Current Voltage: ~ 5.0mm 250 V Housing Material: Air and Creepage Distance: Polyamide, PA 6.6 and PA 6 >3.2mm Approvals: Flammability Rating: VDE, UL CSA applied According UL 94 V-2 Standard Colour: Natural TAB Connectors 1-10 position 5.0 pitch connectors with insulation displacement contacts mateable with components according to rast 5 and with tinned copper alloy tab contacts 6.3 x 0.8mm according to DIN 46244 and DIN 17670 Part 1. TAB-BRIDGE Connectors Same design as TAB Connectors but with a bridge between two adjacent contacts to have a Short Circuit between them. Wire Size Range: 2 0.35–1.5 mm Current Rating: 16 Ampere max. acc. to wire size used PCB Connectors 2–12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with printed circuit boards (PCB) Wire Size Range: 2 0.35–0.75 mm Current Rating: 6 Ampere max. acc. to wire size used PC Board: Single or double side, with ±0.2 thickness 1.6 mm, FR4, 2 x 0.35 µm Copper 5µm tinned tracks, 5.0mm pitch 2032 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Keying Plan and Cable Exit Keying Plan from Mating Direction, 4 3 Fully Keyed Version 1 Locking Latch 2 Keying Rib 2 3 Polarisation Rib 4 Cavity Number 5 Motor Mount 1 2 5 Special Keying Example of Keyed Version: 05-C This final keying version will be produced on the Application Tooling Equipment Cable Exit 3 9 1 Double Wire Exit 4 2 Wire Exit 90° 3 Wire Exit 180° 4 Cover 5 Interior Locking Latch (for TAB Version only) 6 Keying 7 Polarisation 2 1 8 Motor Mount Special Keying 9 Colour Marking Area to identify connectors after 5 harnesses are built up 7 6 8 2033 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches TAB Connector System No. of Positions: Insulation Diameter: Product Specification: AMP MONO-SHAPE MARK II 1 to 10 positions 3.0mm max. 108-20213 TAB Connector System Contact Material: Insulation Resistance: Application Specification: CuNi2Si >10 MΩ 114-20104 Contact Finish: Wire Size Range: 2 Tin Plated 0.35-1.5mm Current Rating: Temperature Range: 16 A, up to 4 contacts 16 A -40°C up to +130°C Part Numbers No. of Positions RAST 5 Version Colour Marking High Glow Wire Packaging as Shipped Standard UL94V0 Temperature 750° no flame Unit 1 0-284471-1 1-284471-1 2-284471-1 3-284471-1 11000 — 2 0-284472-1 1-284472-1 2-284472-1 3-284472-1 5500 — 3 0-284473-1 1-284473-1 2-284473-1 3-284473-1 3520 — 3 0-284473-2 1-284473-2 2-284473-2 3-284473-2 3520 Blue 4 0-284474-1 1-284474-1 2-284474-1 3-284474-1 2640 — 4 0-284474-2 1-28444-2 2-284474-2 3-284474-2 2640 Blue 5 0-284475-1 1-284475-1 2-284475-1 3-284475-1 2200 — 6 0-284476-1 1-284476-1 2-284476-1 3-284476-1 1760 — 6 0-284476-4 1-284476-4 2-284476-4 3-284476-4 1760 Violet 7 0-284477-1 1-284477-1 2-284477-1 3-284477-1 1540 — 2034 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches TAB Connector System (continued) AMP MONO-SHAPE MARK II TAB Connector System 2 Part Numbers No. of Positions RAST 5 Version Colour Marking High Glow Wire Packaging as Shipped Standard UL94V0 Temperature 750° no flame Unit 7 0-284477-2 1-284477-2 2-284477-2 3-284477-2 1540 Blue 7 0-284477-3 1-284477-3 2-284477-3 3-284477-3 1540 Red 8 0-284478-1 1-284478-1 2-284478-1 3-284478-1 1320 — 8 0-284478-2 1-284478-2 2-284478-2 3-284478-2 1320 Blue 10 0-284480-1 1-284480-1 2-284480-1 3-284480-1 1100 — 2035 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches TAB-BRIDGE Connector System - Short Circuit AMP MONO-SHAPE MARK II TAB-BRIDGE Connector System - Short Circuit Part Numbers No. of Positions Bridge Between RAST 5 Version Cavity High Glow Wire Packaging Colour Marking Numbers as Shipped Standard UL94V0 Temperature 750° no flame Unit 2 1-2 0-284472-2 1-284472-2 2-284472-2 3-284472-2 5500 Blue 3 1-2 0-284473-3 1-284473-3 2-284473-3 3-284473-3 3520 Red 6 1-2-3 0-284476-2 1-284476-2 2-284476-2 3-284476-2 1760 Blue 6 1-2 0-284476-3 1-284476-3 2-284476-3 3-284476-3 1760 Red 10 7-8 0-284480-2 1-284480-2 2-284480-2 3-284480-2 1100 Blue 2036 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PCB Connector System No. of Positions: Insulation Diameter: Product Specification: 2 to 12 positions 2.8mm max. 108-20214 Contact Material: Insulation Resistance: Application Specification: Brass >10 MΩ 114-20104 Contact Finish: Wire Size Range: 2 Tin Plated 0.35-0.75mm Current Rating: Temperature Range: 6 A max. -40°C up to +105°C 2 AMP MONO-SHAPE MARK II PCB Connector System wire exit 4 3 1 PC Board 3 2 First Circuit Path 3 MONO-SHAPE Connector 4 Wire 1 2 Notes Concerning the PC Board Layout See also Customer Drawing 284482 and Drawing 93-330805-2 for Test PCB 1 4 Layout 2 1 First circuit path, mate with Connector way No. 1 2 Slot for connector keying rib 2 Adjacent to first and/or last way Based on connector design, for 3.5mm or 7.5mm length 3 3 Hole for locking clip, symmetric Between two ways (diameter 2.5) 4 Slot for connector keying rib symmetric between two ways. Position based on connector design, for 7.5mm length 2037 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions RAST 5 Version Colour Marking Glow Wire Packaging as Shipped Standard UL94V0 750° no flame Unit 2 0-284482-1 1-284482-1 3-284482-1 5500 Green 2 0-284482-2 1-284482-2 3-284482-2 5500 Black 2 0-284482-3 1-284482-3 3-284482-3 5500 Violet 2 0-284482-4 1-284482-4 3-284482-4 5500 Orange 2 0-284482-5 1-284482-5 3-284482-5 5500 Grey 2 0-28482-6 1-284482-6 3-284482-6 5500 Red 3 0-284483-1 1-284483-1 3-284483-1 3520 Green 3 0-284483-2 1-284483-2 3-284483-2 3520 Black 3 0-284483-3 1-284483-3 3-284483-3 3520 Violet 3 0-284483-4 1-284483-4 3-284483-4 3520 Orange 4 0-284484-1 1-284484-1 3-284484-1 2640 Green 2038 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions RAST 5 Version Colour Marking Glow Wire Packaging as Shipped Standard UL94V0 750° no flame Unit 2 4 0-284484-2 1-284484-2 3-284484-2 2640 Black 4 0-284484-3 1-284484-3 3-284484-3 2640 Violet 5 0-284485-1 1-284485-1 3-284485-1 2200 Green 5 0-284485-2 1-284485-2 3-284485-2 2200 Black 5 0-284485-3 1-284485-3 3-284485-3 2200 Violet 5 0-28485-4 1-284485-4 3-284485-4 2200 Orange 6 0-284486-1 1-284486-1 3-284486-1 1760 Green 6 0-284486-2 1-284486-2 3-284486-2 1760 Black 6 0-284486-3 1-284486-3 3-284486-3 1760 Violet 6 0-284486-4 1-284486-4 3-284486-4 1760 Orange 6 0-284486-5 1-284486-5 3-284486-5 1760 Grey 2039 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions RAST 5 Version Colour Marking Glow Wire Packaging as Shipped Standard UL94V0 750° no flame Unit 7 0-284487-1 1-284487-1 3-284487-1 1540 Green 7 0-284487-2 1-284487-2 3-284487-2 1540 Black 7 0-284487-3 1-284487-3 3-284487-3 1540 Violet 8 0-284488-1 1-284488-1 3-284488-1 1320 Green 8 0-284488-2 1-284488-2 3-284488-2 1320 Black 8 0-28488-3 1-284488-3 3-284488-3 1320 Violet 8 0-284488-4 1-284488-4 3-284488-4 1320 Orange 9 0-284489-1 1-284489-1 3-284489-1 1100 Green 9 0-284489-2 1-284489-2 3-284489-2 1100 Black 9 0-284489-3 1-284489-3 3-284489-3 1100 Violet 9 0-284489-4 1-284489-4 3-284489-4 1100 Orange 2040 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions RAST 5 Version Colour Marking Glow Wire Packaging as Shipped Standard UL94V0 750° no flame Unit 2 10 0-284490-1 1-284490-1 3-284490-1 1100 Green 10 0-284490-2 1-284490-2 3-284490-2 1100 Black 11 0-284491-1 1-284491-1 3-284491-1 880 Green 11 0-284491-2 1-284491-2 3-284491-2 880 Black 11 0-284491-3 1-284491-3 3-284491-3 880 Violet 12 0-28492-1 1-284492-1 3-284492-1 880 Green 12 0-284492-2 1-284492-2 3-284492-2 880 Black 12 0-284492-3 1-284492-3 3-284492-3 880 Violet 2041 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Application Tooling In the Entry Level concept, the Next, the prepared IDC terminated into the appropriate Entry Level Semi-Automatic application process is shared by connectors are applied by the insulation displacement slots. IDC Bench Machines two different semi-automatic SIM 500T. The cover is then separated SIM 500P machines. from the housing, turned and To facilitate this, the individual Part No. 528376-2 pushed into final position. The SIM 500P prepares the IDC connectors are loaded into SIM 500T AMP multifitting Mark II bando- a nest and moved automatically The nest, including the finished Part No. 528377-2 liered IDC connectors. The into the termination station. harness module, is removed machine removes the connector from the easily accessed track. The manually inserted wires from the chain and cuts the are, according to a program, keying ribs. SIM 500P SIM 500T Technical Features Technical Data Technical Features Technical Data � Processing of all versions of Power Supply: � Application of all versions of Power Supply: the AMP multifitting Mark II the AMP multifitting Mark II 230 V AC, 50 Hz 230 V AC, 50 Hz connector, with only minor connector system with only Air Pressure: Air Pressure: set up changes. minor set up changes. 6 bar 6 bar � Termination of the wire with � Cutting and reliable removal active support of the IDC Cycle Time: Cycle Time: of the reel clips. contact. approx. 4 s / connector package approx. 1.2 s / line � Cutting and reliable removal � Termination of two wires (without handling time) (without handling time) of the coding and (double wire termination) programmable. polarisation ribs by means of a preset cutting block. � Connector fixture, incorporating three nests for � Nest capacity max. 12 positions each. per machine cycle � Accessible and easily – one connector 4- to 8-pos. interchangeable mechanical – two connectors 2- and program rail. 3-pos. � By utilising several – four connectors 1-position connector fixtures and � Integrated monitoring of the program rails, output and set connector supply. up times can be optimised. � Simple operator interface. � Simple operator interface. 2042 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Application Tooling (continued) IDC Workstation – SIM 50 This semi-automatic machine was designed for the sequential processing of AMP multifitting Mark II IDC connector system and its variations such as direct 2 and indirect mating connector with interior or exterior locking. A processing sequence can consist of one or more IDC con- nectors of the same or different numbers of positions, but a maximum total of 12 positions. The specific key coding of the connectors is performed during the termination process by an integrated cutting device. The wires are manually fed into the machine and then automatically terminated. Integrated control tests ensure a high quality product. Technical Features Technical Data � Processing of all versions of � 50 different production Power Supply: the AMP multifitting Mark II programs can be stored. 230 V AC, 50 Hz connector system without Air Pressure: � Operator PC interface additional set up time. 6 bar displaying machine status � Termination of the wire with and production data; Wire Size Range: active support of the IDC different languages available. 2 2 0.35 mm up to 1.5 mm contact. � Low maintenance costs and Insulation Diameter Range: � Termination of two wires the capability of off-site 1.2 mm up to 3.0 mm in the same slot is troubleshooting via modem. Wire Type: programmable. � Ergonomic and easy to oper- Stranded conductors � Colour coding on the ate through a Touch Screen connector cover possible. Display. � Wire exit angle can be bent 180°. � Short set up and change- over times. � High output. � Correct wire insertion length and key codings are continually checked. � Good / bad sorter; faulty connections will be destroyed. Processing Modules of the SIM 50 2043 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Application Tooling (continued) Flexible Harness Maker – FHM The FHM is a fully-automatic machine featuring modular set up. It is built to manufacture harnesses by processing both IDC connectors and crimp terminals. The basic machine includes a 12 wire selector, a station that cuts the wires to length, a stripping station, a double- crimp unit, two crimping presses and wire end ejector for doubling and daisy chains. A gripper unit takes the wire from the base machine and transfers it to the attached IDC station. Sequential processing allows the manufacturing of cross-overs and bridges as well as double-crimps, depending on the type of IDC connector used. The IDC workstations are easily reconfigured for processing our different IDC connector systems. They include all the Technical Features Technical Data necessary processing operations for IDC termination � Manufacturing of harnesses � Integrated test equipment Power Supply: with minimum change-over and with 2.5 mm pitch IDC con- checks the coding and the 400 V AC, 50 Hz set up times. nectors and/or 5.0 mm pitch insertion depth of the wire, Air Pressure: IDC connectors and/or with and performs a continuity Quality checks integrated in the 6 bar crimp terminals. test. A spark testing unit is manufacturing process ensure also available as an option. the highest quality harness for Wire Size Range: � IDC Workstations are every production run. 2 2 0.22 mm up to 1.5 mm available for the following � Wire printing and single connector systems: housing insertion possible. Wire Length: � AMP DUOPLUG 2.5 � Operator PC interface 220 mm up to 2,500 mm � AMP DUOPLUG 2.5 displays machine status and Insulation Diameter Range: Mark II production data; different 1.2 mm up to 3.0 mm languages available. � AMP DUOPLUG Power Wire Type: � AMP multifitting Mark II � Low maintenance costs and Stranded conductors the capability of off-site � AMP MONO-SHAPE troubleshooting via modem. Mark II � Ergonomic and easy to � The IDC Workstations can operate through a Touch also be used as separate Screen Display. semi-automatic machines with manual wire transfer. � The specific key coding of the IDC connector is done on the IDC Workstation. 2044 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP MONO-SHAPE MARK II Catalogue 1654742 METRIC Dimensions are Connectors in In-Line Mating Technology Revised 5-04 millimetres over inches Application Tooling (continued) IDC Harness Maker – IHM Mark III The new IHM Mark III is a very high performance, fully- automatic machine designed to manufacture parallel jumper harnesses using IDC tech- 2 nology. The simultaneous feeding of up to 21 wires guarantees high productivity and flexibility and a choice of 2.5 mm or 5.0 mm pitch IDC systems. The gripper unit on the left side of the machine is able to spread the wires in both directions to enable the production of har- nesses using both 2.5 mm and 5.0 mm pitch connectors at the same time. Available options are a stripper crimper unit with an integrated crimp force analyser and a good/bad sorting unit. The IDC workstations are easily reconfigured for processing our different IDC connector Technical Features Technical Data systems. They include all the necessary processing � Manufacturing of harnesses � The specific key coding of Power Supply: operations for IDC termination using 2.5 mm and/or 5.0 mm the IDC connector is done on with minimum change-over 400 V AC, 50 Hz pitch IDC systems. the IDC Workstation. and set up times. Air Pressure: Quality checks integrated in the � Very short wire length is � Integrated test equipment 6 bar manufacturing process ensure possible. checks the coding and the Wire Size Range: the highest quality harness for insertion depth of the wire, � Option available to produce 2 2 0.22 mm up to 1.5 mm every production run. and performs a continuity harnesses with crimp test. A spark testing unit is Wire Length: terminals on one side. also available as an option. 125 mm up to 2,200 mm � IDC Workstations are � Operator PC interface available for the following Insulation Diameter Range: displays machine status and connector systems: 1.2 mm up to 3.0 mm production data; different � AMP DUOPLUG 2.5 languages available. Wire Type: � AMP DUOPLUG 2.5 Stranded conductors � Low maintenance costs and Mark II the capability of off-site � AMP DUOPLUG Power troubleshooting via modem. � AMP multifitting Mark II � Ergonomic and easy to � AMP MONO-SHAPE operate through a Touch Mark II Screen Display. � AMP MT Edge 2045 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Introduction AMP Standard Timer Connectors in In-Line Mating Technology AMP Standard Timer connectors according to RAST 5.0 mm standard have been developed to connect RAST 5 components (like motors, leach pumps, water level regulators, relays and push-button switches) in the Household Appliances Industry. They meet industry requirements, for example multiple position connectors, secure connection even at inclining mating as well as a sturdy contact design. AMP Standard Power Timer contacts, for use with Standard Timer housings, are suitable for high density and high current capacity up to 16 A. Housing is designed for Technical Features end-to-end stacking without contact loss. They are available Centerline: Unmating Force: Contacts made for Tabs in different keying and locking 5.0 mm ≤ 8 N according:- versions from 2- positions to DIN 46244 Available Number of Positions: Air and Creepage Distance: 12-positions. (6.3 x 0.8mm / 4.8 x 0.8mm) 2- to 12-positions ≥ 3.0mm Standard Timer contacts can be DIN 46343 Part 2 and 3 Housing Material: Track Resistance: used with stranded wires from Polyamide PA 6.6 PTI 250 2 2 0.5 mm to 2.5 mm and can Contact Material: Glow Wire Test: be double terminated. Of course, CuSn, CuFe 850°C the corresponding tooling is Contact Finish: available, too. Tin Plated, Silver Plated AMP Standard Timer Wire Size Range: connectors are tested by VDE 2 from 0.5 to 2.5mm and fulfil all requirements acc. Wire Size Diameter: to VDE 0700 (air gap, creepage from 2.0 to 3.3mm distance, glow wire test, ball Temperature Range: pressure test, creepage current -40°C to +110°C strength). Current Voltage: UL recognised component. 220 V~ Current Rating: max. 16 A Standard Timer: 6 A Power Timer: 16 A Mating Force Contact: ≤ 15 N 2046 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Interior and Exterior Locking Interior Locking Mating Direction Connection to the Components according RAST 5 Standard 1 1 Connected Timer Contact 2 Standard Timer Housing with Interior Locking 6 2 3 Keying 4 Polarisation 5 Locking Latch 3 6 Cover (Secondary Locking) 7 RAST 5 Tab Array 4 5 2 7 Exterior Locking Connection to the Components Mating Direction according RAST 5 Standard 1 1 Connected Timer Contact 2 Standard Timer Housing with Exterior Locking 3 Keying 4 Polarisation 5 5 Locking Latch 2 6 RAST 5 Tab Array 4 3 6 2047 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Keying Plan and Housings Keying Plan 6 5 from Mating Direction 1 Locking Latch 2 Keying Rib 3 Keying Rib between Cavity 4 Slanted Keying Rib 5 Polarisation Rib 6 Cavity Number 1 4 2 3 AMP Standard Timer Housings 2 Position Rast 5 Variations Part Keying Version Numbers Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 02-A 928344-2 6-928247-2 2.500 / 2.500 Natural 02-B 2-928344-2 0-928247-2 2.500 / 3.000 Black 02-C 3-964951-2 8-928247-2 2.500 / 2.500 Grey 02-D — 0-964983-2 2.500 Blue 02-E 6-928344-2 5-928247-2 2.500 / 2.500 Green 02-G 5-928344-2 2-964983-2 2.500 / 2.500 Violet 02-H 3-928344-2 — 2.500 Brown 02-I 2-964951-2 3-928247-2 2.500 / 2.500 Orange Bold Part Numbers are Preferred Types 2048 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a a ca c ca c – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – b b b b b a a a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – b db db db d b d c a – 1 – – 2 – d – 3 – – 4 – c – 5 – b – 6 – – 7 – Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 2 Position Rast 5 Variations (continued) Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 02-K 2 — 4-928247-2 2.500 Yellow-Green 02-L 0-928343-2 — 3.000 Natural 02-M — 3-964983-2 2.500 Ultramarine-Blue 02-O 0-964951-2 2-928247-2 2.500 / 2.500 Pink 02-P — 7-928247-2 2.500 Purple 02-Q 4-928344-2 — 2.500 Turquoise Bold Part Numbers are Preferred Types AMP Standard Timer Housings 2 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 7-927740-2 9-928247-2 5.000 Natural 0-964768-1 — 5.000 2049 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c c c ca ca – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – b b a a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – b d db d b AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 3 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 03-A 0--928344-3 — 3.000 Natural 03-B — 0-964983-3 2.500 Black 03-D — 3-928247-3 2.500 Blue 03-G — 2-928247-3 2.500 Violet 03-H — 4-928247-3 2.500 Brown 03-K — 2-964983-3 2.500 Yellow-Green Bold Part Numbers are Preferred Types 2050 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c ca a c – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – d b c – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – db b d a c – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – db b Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 3 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking 2 Natural 0--928343-3 — 3.000 Black 02-928343-3 — 3.000 Grey 3-928343-3 — 3.000 — 0-928247-3 2.000 Yellow Grey 2-928344-3 — 2.500 Natural — 5-928247-3 2.500 Bold Part Numbers are Preferred Types 2051 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – d a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – b a – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – db AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 4 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 04-A 928344-4 4-928247-4 2.000 / 1.250 Natural 04-B — 5-928247-4 1.250 Black 04-C 3-928344-4 0-928247-4 2.000 / 1.250 Grey 04-F — 2-928247-4 1.250 White 03-G — 3-928247-4 1.250 Violet AMP Standard Timer Housings 4 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 0--928343-4 — 2.500 Black 02-928343-4 — 2.500 Black 3-928344-4 — 2.500 Bold Part Numbers are Preferred Types 2052 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. a a ca – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – b a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – d d a c – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – b a – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – b d db b d Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 5 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 05-B 2 — 2-928247-5 1.000 Black 05-D — 3-928247-5 1.000 Blue AMP Standard Timer Housings 5 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 0--928343-5 — 1.000 Black 02-928343-5 — 1.000 Green — 5-928247-5 1.250 Yellow — 4-928247-5 1.250 Natural — 6-928247-5 1.250 Bold Part Numbers are Preferred Types 2053 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a a – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – db db – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – b d a – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – b c – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – d d d b AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 6 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 06-A — 964983-6 2.500 Natural 06-C — 928247-6 1.000 Grey 06-D — 2-928247-6 1.000 Blue 06-E — 3-928247-6 1.000 Green Bold Part Numbers are Preferred Types 2054 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. a – 1 – – 1 – – 1 – – 1 – b b – 2 – – 2 – – 2 – – 2 – b c – 3 – – 3 – – 3 – – 3 – c – 4 – – 4 – – 4 – – 4 – d d – 5 – – 5 – – 5 – – 5 – a – 6 – – 6 – – 6 – – 6 – b b d Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 6 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking 2 Natural 928343-6 — 1.000 Black 2-928343-6 — 1.000 Natural 928151-6 — 1.500 — 7-928247-6 1.000 Beige Yellow — 4-928247-6 1.000 Brown — 5-928247-6 1.000 Natural — 6-928247-6 1.000 Natural 2-928344-6 — 1.500 Green 3-928344-6 — 1.500 Bold Part Numbers are Preferred Types 2055 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – b d b b b b – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – c c c c c – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – d b c – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – d d – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – b c a – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – b AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 7 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 07-A/S 928151-7 — 1.300 Natural 07-C — 928247-7 700 Grey AMP Standard Timer Housings 7 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 928343-7 — 500 2-928343-7 — 500 Black Natural 928344-7 — 500 Blue — 2-928247-7 800 2-928151-7 4-928247-7 1.300 / 1.000 Green Natural Natural — 5-928247-7 1.000 Natural — 6-928247-7 1.000 Bold Part Numbers are Preferred Types 2056 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. c a – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – d b a a – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – db c c – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – b d – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – d d – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – – 5 – d b b – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – – 6 – b c c c – 7 – – 7 – – 7 – – 7 – – 7 – – 7 – – 7 – – 7 – – 7 – db d d Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 8 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 08-D 2 — 928247-8 800 Blue AMP Standard Timer Housings 8 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 928343-8 — 1.000 Black 2-928343-8 — 1.000 Grey 3-928343-8 — 1.000 Natural — 2-928247-7 800 Bold Part Numbers are Preferred Types 2057 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. a d c d d d c b – 1 – – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 2 – – 2 – – 2 – – 3 – – 3 – – 3 – – 3 – – 3 – – 4 – – 4 – – 4 – – 4 – – 4 – – 5 – – 5 – – 5 – – 5 – – 5 – – 6 – – 6 – – 6 – – 6 – – 6 – – 7 – – 7 – – 7 – – 7 – – 7 – – 8 – – 8 – – 8 – – 8 – – 8 – AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 9 Position Rast 5 Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 09-D — 2-928247-9 600 Blue AMP Standard Timer Housings 9 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 927740-9 — 1.000 Natural 928151-9 — 1.000 Yellow — 928247-9 500 Brown — 3-928247-9 600 Bold Part Numbers are Preferred Types 2058 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. – 1 – – 1 – – 1 – – 1 – – 1 – b b c – 2 – – 2 – – 2 – – 2 – – 2 – c – 3 – – 3 – – 3 – – 3 – – 3 – b d – 4 – – 4 – – 4 – – 4 – – 4 – a – 5 – – 5 – – 5 – – 5 – – 5 – b c – 6 – – 6 – – 6 – – 6 – – 6 – – 7 – – 7 – – 7 – – 7 – – 7 – d a – 8 – – 8 – – 8 – – 8 – – 8 – d – 9 – – 9 – – 9 – – 9 – – 9 – b Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Housings AMP Standard Timer Housings 10 Position Special Variations Part Numbers Keying Version Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 2 Brown — 1-928247-0 1.400 Grey — 2-928247-0 500 AMP Standard Timer Housings 11 Position Rast 5 Variations Part Keying Version Numbers Packaging RAST 5 Version Colour Unit with Interior Locking with Exterior Locking 1-928247-1 11-B — 1.000 Black Yellow AMP Standard Timer Housings 11 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking 1-927740-1 — 800 Natural Blue — 2-928247-1 1.000 AMP Standard Timer Housings 12 Position Special Variations Part Numbers Packaging Colour Version Unit with Interior Locking with Exterior Locking Natural 1-927740-2 — 700 Bold Part Numbers are Preferred Types 2059 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. b b b b c c d c b c d d d a b b b – 1 – – 1 – – 1 – – 1 – – 1 – – 1 – – 2 – – 2 – – 2 – – 2 – – 2 – – 2 – – 3 – – 3 – – 3 – – 3 – – 3 – – 3 – – 4 – – 4 – – 4 – – 4 – – 4 – – 4 – – 5 – – 5 – – 5 – – 5 – – 6 – – 5 – – 5 – – 6 – – 6 – – 6 – – 7 – – 6 – – 6 – – 7 – – 7 – – 7 – – 8 – – 7 – – 7 – – 8 – – 8 – – 8 – – 8 – – 8 – – 9 – – 9 – – 9 – – 9 – – 9 – – 9 – –10 – –10 – –10 – –10 – –10 – –10 – –11– –11– –11– –11– –12 – AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Standard Timer Connector and Contacts Technical Data Derating Curve I/A 20 Material: 18 Brass, Tin Plated 5 6 16 Mating Part: Standard Power Timer 6.3 Tab 14 Wire: 12 2 FLK 0.5/0.75 and 1.5mm 10 Current Carrying Capacity to 6A: 2 8 1 = Wire 0.50mm , 11pos. housing 2 2 = Wire 0.75mm , 11pos. housing 1234 6 Standard Timer 2 3 = Wire 0.50mm , 2pos. housing 2 4 = Wire 0.75mm , 2pos. housing 4 2 Current Carrying Capacity to 16A: 2 5 = Wire 1.50mm , 11pos. housing 2 6 = Wire 1.50mm , 2pos. housing t/ºC 0 20 406080 100 120 Ambient Temperature Standard Timer Contacts with One Locking Lance Insulation Wire Size Range Diameter Range Material Finish Part Number Packaging Unit 2 (mm ) (mm) 0.5–1.0 1.4–2.3 CuZn/Brass Tin Plated 928820-1 3.000 1.0–2.5 3.0–4.3 CuZn/Brass Tin Plated 926973-1 2.500 Standard Timer Contacts with Two Locking Lances Insulation Wire Size Range Diameter Range Material Finish Part Number Packaging Unit 2 (mm ) (mm) 0.5–1.0 1.4–2.3 CuZn/Brass Tin Plated 964201-1 3.000 1.0–2.5 3.0–4.3 CuZn/Brass Tin Plated 964202-1 2.000 Standard Power Timer Insulation Wire Size Range Diameter Range Material Finish Part Number Packaging Unit 2 (mm ) (mm) 1.0–2.5 2.2–3.0 CuFe/Copper Iron Tin Plated 964203-1 2.300 1.0–2.5 2.2–3.0 CuFe/Copper Iron Silver Plated 964203-5 2.300 1.5–3.0 max. 2 x 3.0 CuFe/Copper Iron Tin Plated 964204-1 2.000 1.5–3.0 max. 2 x 3.0 CuFe/Copper Iron Silver Plated 964204-5 2.000 Bold Part Numbers are Preferred Types 2060 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. Current Rating Rast 5 AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Engineering Notes 2 2061 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents. AMP Standard Timer Catalogue 1654742 Connectors in In-Line Mating Technology Revised 5-04 Engineering Notes 2062 Products for Industrial & Dimensions are shown for Dimensions are in inches and Specifications subject to www.tycoelectronics.com Commercial Applications reference purposes only. millimetres unless otherwise change. Conversion Rate: specified. Values in brackets 25.4mm = 1 inch are metric equivalents.