Application Equipment RAYCHEM Tubing Products Table of Contents Application Equipment HL1910E/HL2010E Light duty heating tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3, 2-4 ThermoGun HG Medium duty heating tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5, 2-6 CV-1981 and 2 CV-1983 Heavy duty hot-air heating tool . . . . . . . . . . . . . . . . . . . . . . . . .2-7, 2-8 IR-1891 Heating work station for short length tubing . . . . . . . . . . . . . .2-9, 2-10 Model 81CE Heating oven for large, complex assemblies . . . . . . . . . . . .2-11, 2-12 RBK-ILS- Installation of splice sealing products adjacent to Processor MKII ultrasonic welder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13, 2-14 Model 105 Table-top or stand alone tunnel oven . . . . . . . . . . . . . . . . . .2-15, 2-16 Model 16B Table top belt heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17, 2-18 Model 19 Belt heater for processing a broad range of products . . . . .2-19, 2-20 Model 20 Upgraded belt heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21, 2-22 VBH-1 Versatile bed heater for large assemblies and substrates . . . . .2-23, 2-24 2-1 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Engineering Notes 2-2 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products HL1910E/HL2010E Light Duty Heating Tool Product Facts  Light duty, portable hot air 2 heater The HL2010E and HL1910E The HL2010E tool is A bench stand allowing use hot air heat guns are switched on and off at the of both the HL2010E and designed to work with a three-stage switch and the the HL1910E as a bench standard line voltage temperature can be contin- tool is available as an (120V) on a wide variety of uously adjusted over a option. Only two reflectors Raychem heat-shrinkable range of 50°C-630°C by the are required to cover most products. These tools are pushbuttons. The tempera- applications of heat-shrink- suitable for occasional use ture can be increased or able tubing and SolderSleeve and are not recommended reduced by 10°C steps. An terminations. for applications requiring LCD display shows the There is an adaptor avail- high duty cycles. Both tools actual temperature. able, which allows the use supply forced hot air with The HL1910E tool is of PR type reflectors. an adjustable heat setting switched on and off at the to meet the requirements of two-stage switch and the many different installation temperature can be contin- situations. A three position uously adjusted over a switch controls the air flow range of 50°C-600°C at the (150/300/500 l/min) thumbwheel (the numbers on it serve as guide only, 1 means 50°C and max. temperature of 600°C is attained at 9). Available in: Americas Europe Asia Pacific   2-3 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products HL1910E/HL2010E (Continued) Technical Specifications Voltage 120V AC Power 2000W Air flow 150 - 500 l/min Weight 920g Length 280 mm Noise <70dB Ordering Information Description Part Number HL2010E-120V tool: HL2010E-KIT-120V CJ2087-000 HL1910E-120V tool: HL1910E-KIT-120V CJ2086-000 HL2010E/HL1910E Accessories: HL1802E-074616 - SolderSleeve Terminators Reflector 832011-000 HL1802E-070519 - Heat-Shrinkable Tubings Reflector 022611-000 HL1802E-ADAPT-PR Adaptor for PR Series Reflector 444817-000 PR-13C-REFLECTOR 991974-000 PR-25D-REFLECTOR 989523-000 HL2010E-BENCH-STD CJ2085-000 2-4 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products ThermoGun HG Medium Duty Heating Tool Product Facts  Stand-mounted or 2 handheld, rugged unit for heavy-duty use  Built-in stand and turbo-fan- driven blower  Adjustable side vents  Adjustable temperature  1680 to 2160 watts  Large reflector size  High heat output for fast installation Applications Specifications Used for installing molded Model Power Requirements Input Watts Temperature Range CFM* RPM** parts onto adapters or HG-501A 120 V, 60 Hz, 14 A 1680 260°C–399°C [500°F–750°F] 23 1700 harnesses and installing HG-502A 230 V, 50/60 Hz, 7 A 1680 260°C–399°C [500°F–750°F] 23 1700 a broad range of heat- HG-751A-C 120 V, 60 Hz, 18 A 2160 399°C–538°C [750°F–1000°F] 23 1700 shrinkable products, includ- HG-752A 230 V, 50/60 Hz, 9 A 1740 399°C–538°C [750°F–1000°F] 23 1700 ing boots and tubing up to *CFM = Cubic feet per minute. three inches in diameter. **RPM = Revolutions per minute. Available in: Americas Europe Asia Pacific  2-5 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products ThermoGun HG (Continued) Accessories A-160-HG reflector A-170-HG reflector TG-23 reflector (P/N 991026) (P/N 991017) for short (P/N 991018) for short lengths for boots up to 44.45 lengths of tubing up to of tubing 19.05–50.8 [.75–2] [1.75] in diameter. 19.05 [.75] in diameter. in diameter. Must be ordered separately. Must be ordered separately. Must be ordered separately. Ordering Information Model* Housing Color Part No. HG-501A Red 462047-000 HG-502A Red 389363-000 HG-751A-C Red 926935-000 HG-752A Red 026239-000 Accessories Tubing Application Part No. A-160-HG standard reflector Diameters up to 19.05 [0.75] 991017-000 A-170-HG large tubing reflector Diameters of 19.05–50.8 [0.75–2] 991018-000 TG-23 small boot reflector Diameters up to 44.5 [1.75] 991026-000 TG-24 large boot reflector — 991027-000 *Complete with bench stand. 2-6 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products CV-1981 and CV-1983 Heavy Duty Hot-Air Heating Tool Product Facts 2  Robust, double-insulated, heavy-duty unit  Highest-wattage unit (1600–2260 watts)  Integral stand that allows use as bench tool  Safe, quiet operation  Precisely variable temperature  Variety of reflectors available  Easy fixturing for dual opposing heating Applications Specifications Used for installing dual wall Electrical Supply or single wall tubing up to CV-1981-MK2 120 V and 230 V three inches in diameter CV-1983 120 V and 230 V and for installing CV-1981 PID 120 V and 230 V SolderSleeve devices. Power Consumption Closed loop version (PID) CV-1981-MK2 1600 W also available. CV-1983 2260 W/3060 W CV-1981 PID 1600 W Total System Noise CV-1981-MK2 65dB CV-1983 65dB CV-1981 PID >70dB Length CV-1981-MK2 340 mm [13.4 in] CV-1983 320 mm [12.6 in] CV-1981 PID 350 mm [13.8 in] Weight CV-1981-MK2 1.3 Kg [2.90 lb] CV-1983 1.5 Kg [3.30 lb] CV-1981 PID 1.4 Kg [3.10 lb] Air Flow CV-1981-MK2 Max 230 l/min CV-1983 Max 500 l/min CV-1981 PID 230 l/min Product Range All dual wall, single wall and molded part products. Various devices products. For other Raychem products , contact TE. Available in: Americas Europe Asia Pacific   2-7 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products CV-1981 and CV-1983 (Continued) Ordering Information Equipment Description Part No. Voltage Hz CV-1981-120V1600W-CANMK2 A42716-000* 120V 50/60 Hz CV-1981-120V1600W-UKMK2 E95798-000 120V 50/60 Hz CV-1981-MK2 CV-1981-230V1600WMK2 813914-000 230V 50/60 Hz CV-1981-230V1600W-SEVMK2 F25836-000 230V 50/60 Hz CV-1981-230V1600-UKMK2 340970-000* 230V 50/60 Hz CV-1983-110V-2260W-UK 441753-000 120V 50/60 Hz CV-1983-220V-2260W 773898-000 230V 50/60 Hz CV-1983 CV-1983-220V-2260W-UK 985426-000 230V 50/60 Hz CV-1983-220V-3060W 538361-000 230V 50/60 Hz CV-1983-220V-3060W-UK 231866-000 230V 50/60 Hz CV-1981-120V-1600W-CANPIDF 839218-000 120V 50/60 Hz CV-1981-120V-1600W-UKPID 928826-000 120V 50/60 Hz CV-1981-PID CV-1981-230V-1600WPID 958770-000 230V 50/60 Hz CV-1981-230V-1600W-SEVPIDF 434366-000 230V 50/60 Hz CV-1981-230V-1600W-UKPIDF 385828-000 230V 50/60 Hz CV-1983 Barrel Adapter AD-1962 989172-000 —— Accessories Application Part No. PR-12 reflector Tubing: 6.3–25.4 mm [0.25 in–1 in] 991973-000 PR-13 reflector Tubing: Up to 6 mm [0.25 in] 991963-000 PR-13C reflector Large SolderSleeve products 991974-000 PR-21 reflector Tubing: Up to 25.4 mm [1 in] 991984-000 PR-24 reflector Tubing/molded parts: 25.4–34.93 mm [1 in–1.38 in] 991964-000 PR-24A reflector Tubing/molded parts: 34.93–60.33 mm [1.38 in–2.38 in] 991989-000 PR-25 reflector SolderSleeve products: Up to 7 mm [0.28 in] 991965-000 PR-25D reflector SolderSleeve products: 6.3–12.7 mm [0.25 in–0.50 in] 989523-000 PR-26 reflector Small SolderSleeve products 991967-000 PR-33 reflector SolderSleeve products: 19.05–25.4 mm [0.75 in–1 in] 997768-000 AD-1962 adapter for larger-barrel CV-1983 — 989172-000 PR-34 reflector SolderSleeve products: 12.0–20.0 mm [0.47 in–0.79 in] 989111-000 PR-51 Special narrow reflector for molded part transitions 113069-000 [21.5 x 3.5 mm nozzle] [.85 in x .14 in] *Note: A42716 supersedes and replaces 538005 340970 supersedes and replaces 923002 2-8 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products IR-1891 Heating Work Station for Short Length Tubing Product Facts 2  Automatic cycle start once heater is manually positioned over product, which gives improved process control (recommended for adhesive- lined heat-shrinkable tubing e.g. sealing applications)  Automatic heating head retraction at end of cycle prevents damage to components  Multiple product fixture assemblies give increased process rates  Cooling fan above each fixture assembly maintains holding fixture at an acceptable temperature Applications before initiating the heating heating time and the time cycle. The operator then taken by the operator to The IR-1891 is suitable for continues with loading/ load and unload the work- the installation of a range of unloading the other work pieces. The installation Raychem heat-shrinkable station whilst the heating temperature/power can be tubing products onto a cycle is taking place. varied according to product variety of small components, type/size and required The IR-1891-220V-Shuttle- e.g. ring terminals, Faston cycle times. Retn is provided with terminals and small con- closed loop temperature The heating elements, nectors etc. The machine control and in addition the which are continuously is provided with two work heat head is ‘locked’ into energized, are of the infra- stations and a moveable position by use of an elec- red medium wave length heating head. tromagnet during the heat- type and consist of a coiled Each workstation is pro- ing cycle. resistance wire contained vided with supports for in quartz glass tubes. The Once the other workstation tooling fixtures (which must closed loop temperature has been loaded and the be specified and ordered control uses similar elements first installation is complete, separately). These support but having integral thermo- the heat head is moved into the workpieces and locate couple sensors. position over the product the tubing products. The and the next heating cycle operator loads the work- initiated. Heating times vary pieces into the fixtures at typically from 3 to 30 one of the workstations, seconds depending on the ensures that the tubing size and type of tubing product is correctly posi- product. Process rates up tioned and then slides the to 1200 pieces/hour can be heat head into position achieved depending on the Available in: Americas Europe Asia Pacific  2-9 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products IR-1891 (Continued) Technical Specifications Electrical Supply 230 V Single Phase Power Consumption 1600 W Operating Temperature 650°C max Process Rate 1200 / hour maximum depending on application and operator Heating Times 3 to 30 seconds depending on application System Noise < 70 dB Dimensions – 508636-000 L1100 x H650 x D500 mm [L43 x H25 x D20 in] Dimensions – 613148-000 / 167309-000 / 289588-000 L1100 x H900 x D500 mm [L43 x H35 x D20 in] Base Plate Dimensions 289588-000 / 167309-000 L1040 x D450 mm [L41 x D18 in] Base Plate Dimensions 613148-000 L1040 x D397 mm [L41 x D16 in] Product Range Wide range of Raychem tubing products in particular LSTT, RNF-3000, RNF-100, HTAT, ATUM. Maximum diameter 20 mm [0.8 in] and maximum length 60 mm [2.0 in] Description Part No. Ordering Information *IR-1891-220V-Shuttle-Retn 289588-000 *IR-1891-220V-Retn-Syl 613148-000 *Note: The descriptions given here DO NOT include the supply of the necessary tooling fixtures.These are designed for each individual application. Accessories Description Part No. Grippers: IR-1891-SI-GRP-165-RD-1mm Red Gripper with 1mm hole 629602-000 IR-1891-SI-GRP-165-CL-2mm Clear Gripper with 2mm hole 112676-000 IR-1891-SI-GRP-165-BK-3mm Black Gripper with 3mm hole F83221-000 IR-1891-SI-GRP-165-WT-6mm White Gripper with 6mm hole 629602-000 Fixtures: IR-1891-Quick-Rel-ESS-6/1 ESS Cap (6/1) Fixture 096735-000 IR-1891-Quick-Rel-ESS-8/2 ESS Cap (8/2) Fixture 148597-000 IR-1891-Tool-Fixt-Bas-ESS Base Unit for Fixtures 760221-000 Note: A wider range of tooling fixtures and grippers designed for previous applications are available. Please contact TE for details. 2-10 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products Model 81CE Discrete Heater for Heat- Shrinkable Tubing Products Product Facts 2  Closed-loop time and temperature control  Controlled process  Adaptable for different applications  Bench top design  CE approved for worldwide use  Heater operation and over temperature alarm lights Applications into the upper heating ele- and load it into the spring cient processing of either ment connected to a closed loaded jaws on either side single-wall or adhesive- The Model 81CE is a CE loop temperature controller. of the heating chamber. The lined tubing. Temperature Certified discrete-type table An alarm light illuminates jaws grip and carry the and time can be controlled top heater which provides a whenever the actual heat- assembly into the heating to accommodate a wide controlled process for ing element temperature chamber and back to the variety of products and recovering a wide variety of varies from the set point home position when the substrates. Raychem heat-shrinkable temperature. time has expired. A protec- products onto wire assem- tion circuit prevents the Safety Features: blies or other suitable sub- cycle from being initiated if Controlled Oven Dwell Time strates. the oven is not at the • Circuit breaker for current desired set point, prevent- Assemblies are loaded into The oven dwell time is surges ing assemblies from being spring loaded jaws on selected using a 3-digit • Emergency Stop processed incorrectly. The either side of the heating thumb wheel digital timer. • Pinch points eliminated small footprint allows the chamber which takes the The time can be set by the housing design processor to be placed in assemblies into the oven for between 1 and 999 sec- close proximity to a welder, a pre-set number of sec- onds for precise heating • An over-temperature allowing a single operator onds, then returns them to ensuring each assembly switch that shuts off all to accomplish two tasks. the home position for being processed sees the power in the event of an removal. same precise amount of heat. overheat condition Versatility • Automatic cool-down cir- Controlled Heating Zone Minimal Skill Requirements cuit to prevent heat dam- The processor is designed age to integral to process a broad range of The Model 81 CE processor There are clearly marked components Raychem heat-shrinkable has two stamped foil heating guides for aligning the tubing products up to • Circuit to prevent cycle elements that are manufac- assembly as well as the 25 mm [1.0 in] in diameter initiation until the oven is tured to a strict wattage tubing or device being and 127 mm [5.0 in] in up to temperature specification. Consistent processed. The operator length. The infrared energy temperatures are controlled only has to center the source is well-suited to effi- by a thermocouple embedded assembly, then the tubing, Available in: Americas Europe Asia Pacific   2-11 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Model 81CE (Continued) Specifications and Electrical Part No. 071965 Part No. 704393-000 Power Requirements 120 VAC, 1∅, 50/60 Hz, 15 A 220 VAC, 1 ∅, 208-240 VAC, 15 A Dimensions Heating elements 2 ea. 400 watt stamped foil with quartz face infrared, one top & bottom Timing System Eagle Digital Timer, 1 to 999 seconds Mechanical Pneumatic cylinder requirement 30 - 40 PSI clean shop air for jaw traversing Dimensions cm [in.] Control box dimensions 43.2 cm [17 in] L x 21.6 cm [8.5 in] W x 16.5 cm [6.5 in] H Control box weight 7.7 Kg [17 lb] Heating chamber dimensions 38 cm [15 in] L x 24 cm [9.5 in] W x 34.3 cm [13.5 in] H Heating chamber weight 18 Kg [40 lbs] Shipping dimensions 61 cm [24 in] x 61 cm [24 in] x 53 cm [21 in] Shipping weight 41 Kg [90 lbs] Tubing sizes Inside diameter Up to 25 mm [1 in] Length Up to 127 mm [5 in] Version Description Part No. Model 81CE -120 Volt CLTEQ-M81CE-120V-HTR 071965-000 Model 81CE - 220 Volt CLTEQ-M81CE-240V-HTR 704393-000 2-12 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products RBK-ILS-Processor MkII Installation of Splice Sealing Products Adjacent to Ultrasonic Welder 2 Product Facts  Increased heating element life  Installation times, temperatures and product size information (individual selection)  Sequenced installations  Operator key lock/password protection levels  Automatic heater retraction on mains failure  Automatic calibration (single cycle)  RS232 interface allows time, temperature and product sizes for the next installation to be transferred from a remote machine (e.g. an ultrasonic welding tool)  Machine hours and installation cycle counters Applications  Automatic communication The wire assembly is  Software upgradeable to with upstream ultrasonic automatically ejected, with support special applications The RBK-ILS-Processor welder can allow time the splice sealing product  Air cooling can be provided MkII is a semi-automatic and temperature to be installed and the joint area to an optional stub splice unit designed specifically automatically set without sealed, insulated and strain fixture in the RBK-Proc-Mk2- to install splice sealing operator intervention. relieved. In-line or stub-type Proc-Aircool version products onto ultrasonically splices can be installed. The operator is able to welded or crimped splice efficiently load both joints used in automotive machines and so minimize harnesses. ‘dead time’. Installing The tool can operate in Raychem splice sealing several modes: products immediately after welding gives reduced  Stand-alone — operator installation time and earliest sets time and temperature. possible mechanical pro-  Sequenced — preset tection for the welded joint. times and temperatures The operator positions the can be sequenced auto- splice sealing product cen- matically (and can also trally over the splice joint be randomly selected and then locates the from sequence stored.) assembly into the gripper mechanism. Available in: Americas Europe Asia Pacific   2-13 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products RBK-ILS-Processor MkII (Continued) Technical Specifications Electrical Supply 220V-240V-50Hz Power Consumption 1.7 Amps (Max) Operating Temperature 550°C [1022°F] (Max) (500°C [932°F] recommended) Machine Cycle Times for splice sealing products 6 to 20 seconds depending on wire size used on typical range of automotive splices and the number or wires used Total System Noise <80dB Dimensions 390 x 365 x 225 mm [15 x 14 x 9 in] Weight 18 Kg [40 lb] Product Range RBK-ILS-125 Products Sizes 1 to 3A RBK-ILS-85 Products Sizes 6/1 to 12/3 For Other Raychem Products (eg RBK-VWS, RBK-ESS….) Contact TE Description Part No. Ordering Information Equipment RBK-Proc-Mk2-Processor 740331-000 RBK-Proc-Mk2-Proc-Aircool A96930-000 Accessories Stub splice fixture - RBK-ILS-Proc-Stub-Sp-Fix 981721-000 Air cooled stub splice fixture - RBK-ILS-Proc-Air-Cool-Kit 843800-000 8 mm ring terminal fixture - RBK-ILS-Proc-Termfix-08mm 049857-000 2-14 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products Model 105 Tabletop Tunnel Oven Product Facts  Closed-loop speed and 2 temperature control  Continuous controlled process  Adaptable for different applications  CE approved for worldwide use  Heater operation and over- temperature alarm lights Applications the heat zone. The upper drive controller and DC or adhesive-lined chamber is equipped with drive motor ensure constant tubing. Heat output and The Model 105 Tunnel Oven adjustable heat shields to conveyor speed at any drive speed can be con- is a reliable and versatile maximize the oven heating potentiometer setting from trolled to accommodate a process heater which pro- efficiency for various appli- 100 to 999 [0.2 to 5.0 feet wide variety of products vides a controlled process cations. per minute], for precise and substrates. for a wide variety of heat- heating of assemblies. shrinkable products. Controlled Heating Zone Safety Features: The M105 is designed as Minimal Skill Requirements an integrated modular unit. The Model 105 Tunnel Oven • Emergency Stop Assemblies are placed on has two stamped foil heat- The open loading area of • Automatic cool-down the entry section of a mesh ing elements that are manu- the entry section of the circuit to extend the life of conveyor belt, transported factured to a strict wattage M105 requires that the the components through the heating chamber, specification. Consistent operator simply place an • Over-temperature switch across a bank of cooling temperatures (ambient to assembly on the mesh con- that shuts off all power in fans then discharged from 700ºC) are controlled by a veyor belt within the effec- the event of an overheat the rear of the conveyor. thermocouple embedded tive width of the heat zone condition into the upper heating ele- and collect it at the oppo- The M105 has two upper ment connected to a site end. • Lockout on temperature heating chamber height closed-loop temperature and speed controllers to positions, 54 mm [2.11 in] controller. An alarm light prevent unauthorized and 98 mm [3.86 in].The Versatility illuminates whenever the changes position is adjusted by actual heating element tem- The processor is designed removing the pivot pins and • Audible alarm indication perature varies from the set to process a broad range of relocating them in the bear- of a heater failure point temperature. heat-shrinkable products up ing stands. • Circuit breaker for current to 76.2 mm [3 in] in diame- The upper chamber is overload ter and infinite length. The Conveyor Speed Control cantilevered to permit pro- infrared energy source is cessing of assemblies that The conveyor speed is pre- well-suited to efficient pro- require only a portion of the cisely set by a 3-digit cessing of either single-wall assembly to pass through potentiometer. The SCR Available in: Americas Europe Asia Pacific   2-15 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Model 105 (Continued) Specifications and Electrical Power requirements 210-240 VAC, 20A, 1∅, 50/60 Hz Dimensions Heating elements (2) 1500 watt infrared stamped foil with black quartz face, one top & bottom Drive system DC gear motor with closed loop motor controller, 3-digit thumbwheel Air flow (cooling) 4 – 100 CFM fans, 2 - for upper heater housing, 2 – for product cooling Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Throughput = 50° to 200°C Mechanical Conveyor belt system Wire mesh 70% open, with optional Teflon coating Belt Speed 6.1 cm [0.2 ft] to 152 cm [5.0 ft] per minute Dimensions cm [in] Processor dimensions 99 cm [39 in] L x 68.5 cm [27 in] W x 41.7 cm [16.5 in] H Processor weight 68 Kg [150 lb] Control box dimensions 51.5 cm [20.25 in] L x 21.0 cm [8.25 in] W x 17.8 cm [7.0 in] H Control box weight 7.7 Kg [17 lb] Shipping dimensions 134.6 cm [53 in] L x 116.8 cm [46 in] W x 63.5 cm [25 in] H Shipping weight 146 Kg [320 lbs] Tubing sizes Tubing diameter (max) Up to 76.2 mm [3.0 in] Tubing length (max) 356 mm [14 in] perpendicular to belt travel, unlimited length parallel to belt travel Version Description Part No. Model 105 Tunnel Oven CLTEQ-M105-TUNNEL-OVEN 955018-000 2-16 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products Model 16B Tabletop Belt Heater Product Facts  Closed-loop speed and 2 temperature control  Continuous controlled process  Adaptable for different applications  Bench top design  Heater operation and over- temperature alarm lights Applications closed-loop temperature Labor costs are reduced Safety Features: controller. An alarm light significantly because once The Model 16B is our small- • Circuit breaker for current illuminates whenever the an operator loads an est (tabletop) conveyor type surges actual heating element tem- assembly, that operator can processor which provides a perature varies from the set begin preparing another • Pinch points protected by controlled process for a point temperature. assembly. The throughput the housing wide variety of heat-shrink- rate is usually limited by the • Belts that do not pinch able tubing products. rate at which the operator Speed Control with significant force can load assemblies into Double-sided timing belts • A n over-temperature the processor. on the top and bottom of The belt speed is selected switch that kills power in the processing chamber using a 3-digit thumbwheel the event of an overheat draw the assemblies through via a closed-loop motor Versatility condition a thermally controlled controller and DC gear infrared heat zone and then motor. The processor is designed • Automatic cool-down through a fan-cooled cool- to process a broad range of circuit to prevent heat ing zone before depositing heat-shrinkable products up damage to components Minimal skill requirements them into the unloading bin. to 19 mm [0.75 in] in diam- eter and 90 mm [3.5 in] in There are clearly marked length. The infrared energy guides for aligning the Controlled Heating Zone source is well-suited to effi- assembly as well as the cient processing of either The Model 16B processor tubing or device being single-wall or adhesive- has two stamped foil heat- processed. The operator lined tubing. Heat output ing elements that are manu- only has to center the can be controlled to factured to a strict wattage assembly then the tubing accommodate a wide vari- specification. Consistent and slide it into the belts. ety of products and sub- temperatures (ambient to The belts grip and carry the strates. 650º C) are controlled by a assembly through the heat- thermocouple embedded ing and cooling zone, into the upper heating depositing them into the element connected to a unloading bin. Available in: Americas Europe Asia Pacific  2-17 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Model 16B (Continued) Specifications and Electrical Part No. 827429-000 Part No. 584313-000, 047143-000 Power Requirements 120 VAC, 1∅, 220 VAC, 1 ∅, Dimensions 50/60 Hz, 20 A 208-240 VAC, 15 A. Heating elements 2 ea. 1000 watt stamped foil infrared with quartz face Drive system DC gear motor with closed loop motor controller, 3-digit thumbwheel Air flow (cooling) 2 – 100 CFM fans in the upper heater housing Mechanical Conveyor belt system Double sided timing belts; two on each side of the processor – pitch 9.5 mm [0.375 in] Belt Speed Up to 288 cm / min [7.5 ft / min] Dimensions cm [in] Processor dimensions 48 cm [19 in] W x 109 cm [43 in] L x 33 cm [13 in] H Processor weight 41 Kg [90 lbs] Shipping dimensions 61 cm [24 in] W x 112 cm [43 in] L x 56 cm [22 in] H Shipping weight 68 Kg [150 lbs] Tubing sizes Tubing diameter (max) Up to 19 mm [0.75 in] Tubing length (max) Up to 90 mm [3.5 in] Version Description Part No. Model 16B - 120 volt CLTEQ-M16B-120V-3WIR 827429-000 Model 16B - 220 volt (4-wire) CLTEQ-M16B-220V-4-WR 584313-000 Model 16B - 220 volt Mod. CLTEQ-M16B-220V-3W-M 047143-000 (3 wire with Transformer) 2-18 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products Model 19 Belt Heater for Heat- Shrinkable Tubing Products Product Facts 2  Closed-loop speed and temperature control  Continuous controlled process  Adaptable for different applications  CE approved for worldwide use  Self-diagnostic circuitry  Parts counter and hour meter Applications Control Heating Zone Minimal Skill Requirements tubing. Temperature and speed can be controlled The Model 19 conveyor The Model 19 processor There are clearly marked to accommodate a wide type processor is a reliable has two stamped foil heating guides for aligning the variety of products and and versatile process elements that are manufac- assemblies as well as the substrates. heater which provides a tured to a strict wattage tubing or device being controlled process for a specification. processed. The operator Safety Features: wide variety of heat-shrink- only has to center the Consistent temperatures able products. assembly, then the tubing (ambient to 700ºC) are con- • Emergency Stop and slide it into the belts. Double-sided timing belts trolled by a thermocouple • Automatic cool-down The belts grip and carry the on either side of the upper embedded into the upper circuit to extend the life assemblies through the and lower heating cham- heating element connected of the components heating and cooling zones, bers draw the assemblies to a closed loop tempera- depositing them into the • Over-temperature switch through a thermally con- ture controller. An alarm unloading bin. that shuts off all power in trolled infrared heat zone, light illuminates whenever the event of an overheat then through a fan-cooled the actual heating element condition zone before depositing temperature varies from the Versatility them into the unloading bin. set point temperature. • Lockout on temperature The processor is designed and speed controllers to The processor was designed to process a broad range of prevent unauthorized to meet the requirements Speed Control Raychem heat-shrinkable changes of the European Safety products up to 25 mm [1 in] The belt speed is selected Directives and is CE in diameter and 178 mm using a 3-digit thumbwheel approved, allowing for [7 in] in length. The infrared (on the front panel) via a worldwide use. energy source is well-suited closed loop motor controller to efficient processing of and DC gear motor. either single wall or adhe- sive-lined Available in: Americas Europe Asia Pacific   2-19 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Model 19 (Continued) Specifications and Electrical Power requirements 210-240 VAC, 20A, 1∅, 50/60 Hz Dimensions Heating elements 2 X Standard = 1580W, Wide = 1660W, Narrow = 880W Drive system DC gear motor with closed loop motor controller; 3-digit thumbwheel Air flow (cooling) 2 – 100 CFM fans in the upper heater housing Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Through-put = 50° to 200°C Mechanical Conveyor belt system Double sided timing belts; two on each side of the processor – pitch 9.5 mm [0.375 in] Belt Speed Up to 152 cm / min [5.0 ft / min] Dimensions cm [in] Processor dimensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H Shipping dimensions 66 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H Processor weight 56 Kg [120 lbs] Shipping weight 86 Kg [190 lbs] Tubing sizes Tubing diameter (max) Up to 2.5 cm [1.0 in] Tubing length (max) Up to 12.7 cm [4.0 in] Standard or 178 mm [7.0 in] with Model 19 - Wide Version Description Part No. Model 19 - Standard (3.75 in. Elements) CLTEQ-M19-BELT-HTR 714529-000 Model 19 - Wide (6 in. Elements) CLTEQ-M19-BELT-HTR-6IN 075135-000 Model 19 - Narrow (1.5 in. Elements) CLTEQ-M19-BELTHTR-SS D43037-000 Optional Attachments Floor Stand with wheels IR-1900-FLOOR-STAND 889664-000 2-20 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products Model 20 Belt Heater for Heat- Shrinkable Tubing Products Product Facts 2  Closed-loop speed and temperature control  Continuous controlled process  Adaptable for different applications  CE approved for worldwide use  Heater operation and over- temperature alarm lights Applications into the upper heating through the heating and • Over-temperature switch element connected to a cooling zones, depositing that shuts off all power in The Model 20 conveyor closed loop temperature them into the unloading bin. the event of an overheat type processor is a reliable controller. An alarm light condition and versatile process illuminates whenever the Versatility • Lockout on temperature heater, which provides a actual heating element and speed controllers to controlled process for a temperature varies from The processor is designed prevent unauthorized wide variety of heat-shrink- the set point temperature. to process a broad range of changes able products. Raychem heat-shrinkable Double-sided timing belts products up to 25 mm [1 in] Speed Control New Features on either side of the upper in diameter and 127 mm [4 in] and lower heating cham- The belt speed is selected in length. The infrared • Self-locking support post bers draw the assemblies using a 3-digit thumbwheel energy source is well-suited in the upper heating through a thermally con- (on the front panel) via a to efficient processing of chamber for servicing, trolled infrared heat zone, closed-loop motor controller either single wall or adhe- maintenance and emer- then through a fan-cooled and DC gear motor. sive-lined tubing. Temperature gency cool down zone before depositing and speed can be con- • Reversing motor relay them into the unloading bin. trolled to accommodate a Minimal Skill Requirements which runs the timing wide variety of products belts in reverse until the and substrates. There are clearly marked Controlled Heating Zone Set Point temperature has guides for aligning the been reached, preventing The Model 20 processor assemblies as well as the Safety Features: the operator from loading has two stamped foil heat- tubing or device being assemblies into the ing elements that are manu- processed. The operator • Emergency Stop machine factured to a strict wattage only has to center the sub- • Automatic cool-down cir- specification. Consistent strate, then align the tubing • Hinged lower side panels cuit to extend the life of temperatures (ambient to and slide the assembly into for access to compo- the components 700ºC) are controlled by a the belts. The belts grip nents, making routine thermocouple embedded and carry the assemblies service and maintenance much easier Available in: Americas Europe Asia Pacific  2-21 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Model 20 (Continued) Specifications and Electrical Power requirements 210-240 VAC, 20A, 1∅, 50/60 Hz Dimensions Heating elements 2 X Standard = 1580W, Wide = 1660W, Narrow = 880W Drive system DC gear motor with closed loop motor controller; 3-digit thumbwheel Air flow (cooling) 2 – 100 CFM fans in the upper heater housing Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Through-put = 50° to 200°C Mechanical Conveyor belt system Double sided timing belts; two on each side of the processor – pitch 9.5 mm [0.375 in] Belt Speed Up to 152 cm / min [5.0 ft / min] Dimensions cm [in] Processor dimensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H Shipping dimensions 66 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H Processor weight 56 Kg [120 lbs] Shipping weight 86 Kg [190 lbs] Tubing sizes Tubing diameter (max.) Up to 25 mm [1.0 in] Tubing length (max.) Up to 104 mm [4.0 in] stand Version Description Part No. Model 20 - Standard (3.75 in. Elements) MODEL20CE-BELT-HEATER CB8546-000 Optional Attachments Floor Stand with wheels IR-1900-FLOOR-STAND 889664-000 2-22 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Application Equipment RAYCHEM Tubing Products VBH-1 Versatile Bed Heater for Large Assemblies and Substrates 2 Product Facts The Versatile Bed Heater (VBH-1) is the latest generation of reliable and versatile process heaters.  Closed-loop speed and temperature control  Controlled process  Adaptable for a large variety long length and heat sensitive applications  Heater operation and over- temperature alarm lights  Heater and track are sold seperately. See available track lengths on page 2-24. Applications Speed Control Minimal Skill Requirements Safety Features The VBH-1 is an integrated The belt speed is selected The open loading area of • Emergency Stop modular unit consisting of using a 3-digit thumbwheel the holding fixtures on the • Automatic cool-down an upper and lower heater (on the front panel) via a VBH-1 requires that the circuit to extend the life chamber with a transporter closed-loop motor controller operator simply place the of the components base and motorized wheels and DC gear motor. assembly on the holding • Over-temperature switch that are directed through an fixtures within the effective that shuts off all power in aluminum track. The heater width of the heat zone. The Controlled Heating Zone the event of an overheat transporter automatically assemblies can be removed condition stops when it reaches the once the heater transporter The VBH-1 processor has parking station at either end has passed over the assem- two stamped foil heating • Lockout on temperature of the process area. blies and has come to a elements that are manufac- and speed controllers to complete stop in either the tured to a strict size and prevent unauthorized It has been designed to right or left parking stations. wattage specification. changes accommodate a large vari- Consistent temperatures ety of difficult to process • Safety guards to protect (ambient to 650ºC) are con- applications. With an Versatility operator from moving trolled by a thermocouple adjustable upper heating parts and hot surfaces embedded into the upper The traveling heater is chamber the heater separa- heating element connected designed to process a tion can be adjusted from to a closed loop tempera- broad range of heat-shrink- 37 mm [1.5 in] to a 150 mm ture controller. An alarm able products up to 127 [6 in] gap enabling the unit light illuminates whenever mm [5 in] in diameter and to process heat-shrinkable the actual heating element infinite length. tubing products up to 127 temperature varies from the mm [5 in} in diameter. The The infrared energy source set point temperature. upper and lower chambers is well-suited for efficient are provided with adjustable processing of either single- heat shields to maximize wall or adhesive-lined tubing. the oven heating efficiency. Heat output and drive speed can be controlled to accom- modate a wide variety of products and substrates. Available in: Americas Europe Asia Pacific  2-23 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products VBH-1 (Continued) Specifications and Electrical Power Requirements 208/240 VAC, 1∅, 50/60 Hz, 20 A Dimensions Heating elements 2 X From 600 to1600 watt infrared stamped foil with quartz face Drive system 1/12 hp DC motor with SCR Drive controller with a 3 digit speed potentiometer Air flow (Cooling) 2 X 100 CFM fans in the upper heater housing / control box and 1 in lower chamber Operating temperature Set Point (Heater Surface) - Ambient to 650°C, Through-put = 50° to 250°C Mechanical Moving oven speed 12.7 cm [0.50 ft] to 254 cm [10.0 ft] / Minute Heater separation Adjustable from 37 mm [1.5 in] to 150 mm [6 In] Upper Position Effective heating length 355 mm [14 in] Effective heating width 254 mm [10 in] Dimensions cm [in] Control box dimensions 407 mm [16 in] L x 305 mm [15 in] W x 125 mm [5 in] H Heating Chamber dimensions 457 mm [18 in] L x 407 mm [16 in] W x 533 mm [21 in] H – Full extension Heating System weight 30 Kg [66 lb] Tubing sizes Tubing diameter Up to 127 mm [5 in] Tubing length 255 mm [10 in] perpendicular to heater travel, unlimited length parallel to heater Heating unit Description Part No. VBH-1 Bed Heater VBH-1-BED-HTR-220V-3WR CJ1047-000 Track Description Part No. 10 ft. Aluminum Track VBH-1-BED-HTR-TRACK-10FT CJ1494-000 15 ft. Aluminum Track VBH-1-BED-HTR-TRACK-15FT CM6819-000 2-24 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666