T200 IDENT PRINTER BUDGET THERMAL TRANSFER PRINTER TECHNICAL DATASHEET TTDS-256 issue 6, May 2015 The T200 Ident printer is a budget thermal transfer printer. Designed to print on a wide range of TE Connectivity (TE) identification marker sleeves, cable markers, and labels. This light weight, low cost printer replaces the T212M- PRINTER.   PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information TECHNICAL DATA SHEET TTDS-256 Features  High accuracy printing  Easy to fit accessories  Easy to use  Touch screen  Light weight  Software version available  Small footprint Applications  Office environment  Light Industrial environment Approvals / Declarations  CE  UL  FCC Class A  GOST  CB  KC  CCC Environmental  Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the ‘TE Product Compliance Support Centre’: http://www.te.com/en/resources/product-compliance.html Specifications The printer’s 300dpi resolution combined with recommended media and Thermal Transfer ribbons, meet all relevant TE RW performance specifications. Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found at the TE document centre: http://www.te.com/commerce/DocumentDelivery/DDEController   PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information TECHNICAL DATA SHEET TTDS-256 PRINTER ORDERING INFORMATION DESCRIPTION PART NUMBER T200-IDENT-PRINTER EC6996-000 T200-IDENT-SWARE-PRINTER EC6997-000 PRINTER PROPERTIES PERFORMANCE PRINT SPEED  30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)  PRINT WIDTH MAX:  105.7mm (4.2in)  PRINT DEFINITION:  300 dpi Thermal Transfer  LABEL WIDTH  5 to 120mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width  LABEL HEIGHT  5mm (0.2 in) minimum to 1,000mm (39.4 in) maximum  MEDIA ROLL CAPACITY  152mm (6.0 in) Outside Diameter, inside core diameter 38 – 76mm (1.5 – 3 in)  INK RIBBONS  25.4mm (1 inch) core, ink inside or outside, variable length up to 360M (1181 ft)   CUT MODE  Cutter & Perforator available as accessories.  SENSOR  Variable position Gap & Reflective (automatic calibration)  ELECTRICAL REQUIREMENTS  100 to 240V - 50/60Hz, PFC  OPERATING TEMPERATURE  +5°C to +40°C (+41°F to +104°F).  OPERATING HUMIDITY  10% to 85% non-condensing RH  POWER CONSUMPTION  Power save mode 1.8W  Typical 45W / Max 100W  PHYSICAL CHARACTERISTICS  Depth: 322mm (12.7 inches)  Height: 189mm (7.4 inches)  Width: 253mm (10.0 inches)  Weight: 4kg (8.8 lb)  PERFORATOR/CUTTER  Perforator: maximum product width 5 - 45mm (0.2 - 1.8 in).  Cutter: maximum product width 5 - 85mm (0.2 - 3.3 in).  Perforator/Cutter: 200 cuts/perforations per minute. Cut/ Perforate length 5 - 1000mm  INTERFACES  USB 2.0 High speed slave for PC connection at the rear of the printer  USB master 1 at rear of the printer (Up to 500mA), 2 at front of printer (Up to 100mA)  RS232 C 1.200 up to 230.400 Baud rate / 8 Bit  Ethernet 10 / 100 Base T, LPD, Raw IP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP  ELECTRONICS  RAM 64MB, Processor speed 400MHz, Memory IFFS flash 16MB  PRINTER SPARE PARTS ORDERING INFORMATION (consumables) 300 dpi Printhead    Description  T200-IDENT-PRINTHEAD  Part number  EC8927-000  Drive roller    Part number  T200-IDENT-DR4-DRIVEROLLER  Description  EC8926-000    PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information TECHNICAL DATA SHEET TTDS-256 PRINTER ACCESSORY ORDERING INFORMATION Cutter    Description:  T200-IDENT-CUTTER  Part number:  EC8456-000  Perforator:    Description:  T200-IDENT-PERFORATOR  Part number:  EC8869-000  Universal reel holder    Description:  PRINTER-UNIVERSAL-REEL-HOLDER  Part number:  EC9926-000  For more details regarding printer accessories please consult TTDS-260, and for more details concerning the Universal reel holder please consult TTDS-259. T200 Ident printer fitted with T200 Ident printer with the Universal reel holder   Cutter/Perforator.   SOFTWARE ORDERING INFORMATION WINTOTAL 6 (Dongle)    Description  WINTOTAL-6-DONGLE  Part number  EC9816-000  WINTOTAL 5 (Dongle)    Description  WINTOTAL-5-DONGLE  Part number  ED4097-000  Printeasy 5 Express    Description  PEP-5-Express  Part number  CC6161-000  Printeasy 5 Pro    Description  PEP-5-Pro  Part number  CC6174-000  Printeasy 5 Suite    Description  PEP-5-Suite  Part number  CC6178-000    PAGE 4 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information TECHNICAL DATA SHEET TTDS-256 SOFTWARE Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: http://www.te.com/en/general/label-printing-software.html Contact a TE representative for further information te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connec- tivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved.   PAGE 5 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information