PRINTERS T107M Series Printers . . . . . . . . . . . . . . .135 LMS-6000 Laser Marking System . . . .142 T200 Series Printers . . . . . . . . . . . . . . . . .137 LMS-9000 Laser Marking System . . . .143 T300 Series Printers . . . . . . . . . . . . . . . . .138 BSC-100 Barcode scanners . . . . . . . . . .144 T400 Series Printers . . . . . . . . . . . . . . . . .139 BSC-200 Hand held imager . . . . . . . . . .145 T612M-DS Printer . . . . . . . . . . . . . . . . . . .140 VLD-100 Hand held imager . . . . . . . . . .146 AM6310 Printer . . . . . . . . . . . . . . . . . . . . .141 VRF-100 Data Matrix Verifier . . . . . . . .147 RIBBONS Thermal Transfer . . . . . . . . . . . . . . . . . . . .148 Dot Matrix . . . . . . . . . . . . . . . . . . . . . . . . . .154 SOFTWARE WinTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 PrintEasy . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 APPLICATION SYSTEMS HL2010E/HL1910E hand held heater . . . . . . . . . . . . . . . . . . . .160 AMP-TY Nylon cable ties . . . . . . . . . . . . .161 AMP-TY Application Tool . . . . . . . . . . . .162 OBSOLETE NOT the LATEST 134 Catalog 1654227 Dimensions not italicized are Dimensions are shown for REVISION USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T107M Handheld Printer The new T107M from Tyco Electronics is perfect for the Printer Specifications professional user who needs an affordable label printer for on-site Printing Method Thermal Transfer Printhead (180 dpi) applications that's tough and easy to use. Contractors, panel Dimensions 70 mm L x 114mm W x 212mm H builders and facility managers will save time and money by using Printer Weight 519g the special Hot Keys that provide labels at the touch of a button Keyboard ABC layout including wire and cable wraps,module marking, fixed length, To access international characters: Rapid Accented Character Entry, according to the serialization, vertical printing, barcodes, symbols and much more. mobile phone principle. The T107M offers clear, smudge-free high-performance labels that LCD Display 2 lines stick permanently to a variety of surfaces and provides remarkable Rechargeable battery pack life indicator Display backlighting MIL-spec print permanence on Heat Shrink Tubing. Print media is Operating conditions Temperature: 4°C to 40°C (39°F to 104°F) offered in easy-to-load cassettes and includes an optimized ribbon Humidity: 10% to 90% RH and choice of material: Heat-Shrink, Nylon Cloth, Vinyl, Polyester, Storage conditions Temperature : 0°C to 90°C (32°F to 194°F) and Polypropylene labels. Humidity: 10% to 90% RH Product Order Code Description T107M-SMS-PRINTER-KIT-US Printer Kit - US power adaptor included T107M-SMS-PRINTER-KIT-UK Printer Kit - UK power adaptor included T107M-SMS-PRINTER-KIT-EU Printer Kit - European power adaptor included T107M-SMS-PRINTER-KIT-AUZ Printer Kit - Australia power adaptor included T107M-SMS-PRINTER-KITASI Printer Kit - Asia power adaptor included T107M-SMS-PRINTER-US Printer Only (US) T107M-SMS-PRINTER-EU Printer Only (European) SMS-US-A/C-ADAPTOR US A/C power adaptor SMS-EU-A/C-ADAPTOR European A/C power adaptor SMS-ASIA-A/C-ADAPTER UK & Asia A/C power adaptor SMS-AUZ-A/C-ADAPTOR Australian A/C power adaptor SMS-BATTERY-PACK Rechargeable battery pack SMS-CARRY STRAP Soft carry strap SMS-PRINTER-HARDCASE Hard case Printer Kit Contents Printer Rubber protection bumper User guide Six (6) AA batteries Power adaptor Hard carry case One (1) 19mm white flexible nylon tape printer cassette One (1) 9mm yellow heat-shrinkable tubing printer cassette See page 136 for available printer cassettes and ordering information. 135 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T107M Handheld Printer Cassettes Ordering Infornation T107M Cassettes Cable Diameter Length Shrink Technical Description Material mm inches m Radio Color Datasheet SMS-TMS-3.9-4 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 Yellow TTDS-122 SMS-TMS-3.9-9 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 White TTDS-122 SMS-TMS-5.2-4 Heat-shrink tubing 1.73 - 3.73 0.07 - 0.15 1.5 3:1 Yellow TTDS-122 SMS-TMS-5.2-9 Heat-shrink tubing 1.73 - 3.73 0.05 - 0.15 1.5 3:1 White TTDS-122 SMS-TMS-7.9-4 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 Yellow TTDS-122 SMS-TMS-7.9-9 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 White TTDS-122 SMS-TMS-13.2-4 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 Yellow TTDS-122 SMS-TMS-13.2-9 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 White TTDS-122 Width Length Technical Description Material mm inches m Color Datasheet SMS-NC-12-4 Nylon Cloth 12 0.47 3.5 Yellow TTDS-123 SMS-NC-12-9 Nylon Cloth 12 0.47 3.5 White TTDS-123 SMS-NC-19-9 Nylon Cloth 19 0.75 3.5 White TTDS-123 SMS-PPNA--6-9 Non-adhesive tag 6 0.24 5.5 White TTDS-124 SMS-PPNA-9-9 Non-adhesive tag 9 0.35 5.5 White TTDS-124 SMS-V-12-4 Colored vinyl 12 0.47 5.5 Yellow TTDS-125 SMS-V-12-9 Colored vinyl 12 0.47 5.5 White TTDS-125 SMS-V-19.2 Colored vinyl 19 0.75 5.5 Red TTDS-125 SMS-V-19-4 Colored vinyl 19 0.75 5.5 Yellow TTDS-125 SMS-V-19-5 Colored vinyl 19 0.75 5.5 Green TTDS-125 SMS-V-19-9 Colored vinyl 19 0.75 5.5 White TTDS-125 SMS-WP-9-9 Polyester 9 0.35 5.5 White TTDS-126 SMS-WP-12-9 Polyester 12 0.47 5.5 White TTDS-126 SMS-MP-12-8A Polyester 12 0.47 5.5 Metalized TTDS-127 SMS-MP-19-8A Polyester 19 0.75 5.5 Metalized TTDS-127 SMS-CP-12-X Polyester 12 0.47 5.5 Clear SMS-CP-19-X Polyester 19 0.75 5.5 Clear 136 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T200 Series portable thermal transfer printers The T200 series of printers are portable/desktop thermal transfer Printer Specifications printers with a 4.1" print head offering an economical option for Tyco Electronics T208M-TTDS-011 low volume customers who want to take advantage of thermal T212M-TTDS-064 transfer printing technology. Their small, light weight design Print head width 104mm (4.09") makes them ideal for applications requiring portability or in Print head resolution T208M: 8dpmm (203 dpi) environments with multiple workstations where space is limited. T212M: 12dpmm (305 dpi) Print speed (maximum) 51mm/sec (2 inch/sec) The T208M has a 200 dpi printhead; the T212M has a 300 dpi Media sensor Transmissive (fixed) printhead for crisp, high quality text, barcodes and graphic images. Reflective (fixed Both printers are designed for use with Tyco Electronics range of Memory T208M: 256KB SRAM and 512KB Flash TMS heat shrinkable wire marker sleeves and limited thermal T212M: 512KB SRAM and 1MB Flash transfer printable pressure sensitive label products. Communication interface Parallel (Centronics), serial (RS232), T200 series printers are available with optional label spindle and USB accessory. It externally holds a roll of labels on 3" core for easy Printer dimensions 200mm W x 247mm D x 171mm H dispensing. (7.9" W x 9.75" D x 6.75" H) Printer weight 1.81 kg (4 lbs) Shipping weight 4 kg (9 lbs) Media Specifications Maximum print width 104mm (4.09") Maximum media width 118mm (4.65") Minimum media width 28mm (1.12") Maximum media roll diameter 127mm (5.0") Media core diameter 25mm (1.0") Ribbon wind Ink side out Product Order Code Description T208M-PRINTER T208M thermal printer - standard T208M-C-PRINTER T208M thermal printer - cutter option T212M-PRINTER T212M thermal printer - standard T212M-C-PRINTER T212M thermal printer - cutter option T200-LABEL-SPINDLE External label roll holder for T200 printers Only the T212M printer is recommended when printing size 3/32 (2.4mm) marker sleeves. 137 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T300 Series High performance, cost effective thermal transfer printers The T300 series printers are high performance, yet cost effective Printer specifications thermal transfer printers with a 4.1" printhead. The rugged and Tyco Electronics T308S-TTDS-054 T312M-TTDS-066 durable all metal construction makes them suitable for demanding T312Z-TTDS-115 industrial and commercial environments. The enhanced memory Print head width 104mm (4.09") and 32 bit processor provide fast data processing and print Print head resolution T308S: 8dpmm (203 dpi) speeds. Optional accessories are available for added convenience T312M/T312S/T312Z*: 12dpmm (305 dpi) and efficiency. Print speed (maximum) T308S/T312M/T312S: 203mm/sec The T308S and T308SN have a 200 dpi printhead for use with (8 inch/sec) the Tyco Electronics range of thermal transfer printable pressure T312Z*: 154mm/sec (6 inch/sec) sensitive label products. The T308SN provides network capability Media sensor Transmissive - adjustable for real time connectivity with the printer. With such connectivity, Reflective (fixed) print jobs can be modified from any location over the Internet via Memory T308S/T312M/T312S: 6MB DRAM and 2MB Flash Web-based tools. The T308SN printer is also capable of sending alerts via email enabled wired or wireless devices. T308SN: Additional 8MB flash memory in PCMCIA socket The 300 dpi printhead on the T312S, T312M and T312Z T312Z*: 4MB DRAM and 1MB Flash produces crisp, high quality text, barcodes and graphic images. Communication interface Bi-directional parallel (Centronics) and The T312S and T312Z are for use with Tyco Electronics thermal serial (RS232) transfer printable pressure sensitive label products. The color- Printer dimensions T308S/T312M/T312S: coded operator cues and auto-calibration features make T312Z an 283mm W x 495mm D x 394mm H affordable yet easy to use label printing system. The T312M is (11.2" W x 19.5" D x 15.5" H) designed for use with Tyco Electronics TMS and HSI wire marker T312Z*: sleeves, as well as thermal transfer pressure sensitive label 278mm W x 475mm D x 338mm H products. (10.93" W x 18.69" D x 13.32" H) Printer weight T308S/T312M/T312S: 25kg (55 lbs) T312Z*:15kg (32.4 lbs) Shipping weight T308S/T312M/T312S: 29kg (63 lbs) T312Z*:22kg (49 lbs) Media Specifications Maximum print width 104mm (4.09") Maximum media width 114mm (4.48") Minimum media width T308S/T312M/T312S: 20mm (0.76") T312Z*: 25.4mm (1.0") Maximum media roll diameter 203mm (8.0") Media core diameter 76mm (3.0") Ribbon wind Ink side out Product order code Description T308S-PRINTER T308S thermal printer - standard T308S-C-PRINTER T308S thermal printer - cutter option T308S-R-PRINTER T308S thermal printer - internal rewind option T308SN-PRINTER T308S thermal printer - network capabilities T312SN T312S thermal printer - network capabilities T312S-PRINTER T312S thermal printer - standard T312S-C-PRINTER T312S thermal printer - cutter option T312S-R-PRINTER T312S thermal printer - internal rewind option T312M-PRINTER T312M thermal printer - standard T312M-R-PRINTER T312M thermal printer - internal rewind option T312Z-PRINTER T312Z thermal printer - standard* *Not available in Europe, Middle East or Africa 138 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T400 Series High performance and high speed thermal transfer printers The T400 series printers are high performance thermal transfer Printer specifications printers with narrow to wide printheads suitable for variety of Tyco Electronics T408M-TTDS-015 T424S-TTDS-116 mission critical applications. The rugged and durable metal Print head width T408M: 128mm (5.04") construction makes them a top choice for demanding industrial and commercial needs. T424S*: 81mm (3.2") Print head resolution T408M: 8dpmm (203 dpi) The enhanced memory and dual 32-bit processor provide T424S*: 23.5dpmm (600 dpi) extremely fast data processing and print speeds. T400 series Print speed (maximum) T408M: 305mm/sec (12inch/sec) printers are the best option for high volume and 24 hour duty T424S: 102mm/sec (4inch/sec) cycles. High speed of 12 inch/sec on T408M printers is well Media sensor Transmissive and reflective suited for the applications in which labels are needed quickly, Reflective (fixed) either on demand or in batches. With the highest print resolution Memory 16MB SDRAM and 4MB Flash of 600 dpi printhead on the T424S produces unmatched quality Communication interface Bi-directional parallel (Centronics), serial of crisp, high quality text, barcodes and graphic images in a limited (RS232), and USB 2.0 space - ideal for printing linear and 2-dimensional barcodes. Printer dimensions T408M: The T408M is designed for use with Tyco Electronics TMS and 283.2mm W x 495.3mm D x 393.7mm H HSI wire marker sleeves, as well as thermal transfer pressure (11.15" W x 19.5" D x 15.5" H) sensitive label products. The T424S is ideal for use with Tyco T424S*: Electronics thermal transfer printable pressure sensitive label 263.5mm W x 495.3mm D x 393.7mm H products. (10.37" W x 19.5" D x 15.5" H) Printer weight T408M: 25kg (55 lbs) T424S*:22.7kg (50 lbs) Shipping weight T408M: 29kg (63 lbs) T424S*: 27kg (59 lbs) Media Specifications Maximum print width T408M: 128mm (5.04") T424S*: 81mm (3.2") Maximum media width T408M: 140mm (5.51") T424S*: 114mm (4.5") Minimum media width T408M: 40mm (1.57") T424S*: 20mm (0.76") Maximum media roll diameter 203mm (8.0") Media core diameter 76mm (3.0") Ribbon wind Ink side out Product order code Description T408M-PRINTER T408M thermal printer - standard T408M-R-PRINTER T408M thermal printer - internal rewind option T424S-PRINTER T424S thermal printer - standard* *Not available in Europe, Middle East or Africa T400 Series printers are available with wider printhead configurations for speciality identification applications. Contact Tyco Electronics for such product requirements. 139 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers T612M–DS Double sided thermal transfer printer Specifically designed by Tyco Electronics, the T612M-DS printer Printer specifications answers a common need in heat-shrinkable wire and cable Tyco Electronics T612M-TTDS-098 identification markers: single-pass printing onto both the front and Print head width 128 mm (5.04") back side of the markers simultaneously. Specifically developed Print head resolution 12 dpmm (304 dpi) and modified by Tyco Electronics for this application, the T612M- Print speed (maximum) 50 to128 mm per second DS is a high duty cycle, industrially robust thermal transfer printer. (2 [recommended] to 5 inches per second) It will print onto the complete range of TMS System Six heat- 3 1 Media sensor Transmissive and gap shrinkable markers in all sizes from /32" (2.4 mm) to 2 /4" Memory 12MB DRAM and 1 MB flash (57.2 mm). The data printed onto the two sides of each marker Communication interface Parallel (centronics) and serial can be identical or different, same side up or flipped. (RS232/422) Printer dimensions 559 mm W x 432 mm D x 508 mm H (22" W x 17" D x 20" H) Printer weight 38 kg (84 lbs) Shipping weight 51 kg (112 ibs) Media specifications Maximum print width 112mm (4.4") Maximum media width 117 mm (4.625") Maximum media roll diameter 254 mm (10.0") Media core diameter 26 mm (3.0") Ribbon wind Ink side out Product order code Description T612M-DS-PRINTER Tyco Electronics T612M-DS thermal printer – standard 140 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers AM6310 Heavy duty dot matrix printer Specifically designed by Tyco Electronics, the AM6310 is a heavy Printer specifications duty industrial dot matrix printer with a high impact 24-pin print Tyco Electronics TTDS-002 head. Automatic media thickness detection and a high impact Print head 24-pin high-impact dot matrix print head make the AM6310 the best industrial printer available Print speed Max. high-speed draft: 600 cps at 12 cpi for heavy gauge wire marker and tag materials, and the 24-pin Letter quality: 160 cps at 12 cpi print head produces high quality text printing with fast print Print direction Bi-directional, logic seeking speeds. Standard AM6310 printer models are designed to print Control panel LCD, 12 keys, select-dial and on Tyco Electronics HSI wire marker sleeves and dot matrix quick access setup menu pressure sensitive label and tag products. AM6310D models are Feed mechanism Tractor (single or dual) equipped with dual tractor mechanism necessary for guiding TMS Memory 2 MB flash sleeve product range. Such dual tractor models can also print on Input buffer 80 KB HSI and dot matrix label and tag product range. Communication interface Parallel port (centronics 36-pin) and serial port (RS232/DB25) Printer dimensions 483 mm W x 427 mm D x 208 mm H 19.0" W x 16.0" D x 8.2" H Printer weight 18.1 kg (40 lbs) Media specifications Maximum print width 279 mm (11.0") Maximum media width 305 mm (12.0") Minimum media width 25 mm (1.0") Product order code Description AM6310-110V Tyco Electronics AM6310 dot matrix printer – standard 110 V AM6310-230V Tyco Electronics AM6310 dot matrix printer – standard 230 V AM6310D-110V Tyco Electronics AM6310 dot matrix printer – dual tractor 110 V AM6310D-230V Tyco Electronics AM6310 dot matrix printer – dual tractor 230 V New at Tyco Electronics. Ultra clean dot martrix labels! Process Improvement - Web Cleaning To address reported issues with our dot matrix label stock, we sought out equipment that would help us to remove containments from the label surface and imrpove overall printability. This contact cleaning/tacky roll system was integrated into our rewind tables to remove small to microscopic particles down to 1 micron from the label sur- face. Flood coating the web with black ink showed a cleaning efficiency that was beyond our expectations. This 12" roller vacuum style construction helps to reduce waste, imrpove product quality and save production loss. Containments tend to attach themselves to the labels surface due to static electricity and moisture which require stringent cleaning tech- niques. Since implementing the web cleaners, we have seen huge improvements in the cleanliness of our label stock which has drastically reduced the potential for printing issues. 141 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Printers Hardware/Software Printers LMS6000 Laser Marking System The LMS6000 Laser Marking System is a fully functional, closed- Printer specifications loop, Ytterbium doped fiber laser system that is fact, efficient, Operating power 85-220V, 50-80Hz - laser flexible and reliable. The LMS6000 system comes integrated with 110V, 60 Hz - fume extractor state-of-the-art software and transport systems. These integrated Maximum output power 10 watts laser power, 0.5mJ systems are capable of marking on a variety of flat label materials. Power consumption 350W Laser only Operating temperature 10-40˚C Optional direct marking module provides the capability to mark on specific metallic and plastic components. Humidity non-condensing 30-85% Weight: 42KG The system comes complete with a fume extraction system to Laser type Ytterbium doped fiber laser, pulsed meet the strictest of emission and safety regulations. If validation is Q-switched not required, the system can be fitted with an optional cutter used Cooling system Air cooled to cut the labels as they exit the marking chamber. Beam dimensions TEM-00 (M2<1.4), Plano Spherical 163 Wavelength 1062nm Pulse width 100nsec Pulse frequency 20-80MHz Pilot laser 650nm/1mW Laser protection class 4 Marking area 130mm x 130mm Resolution 725-1000 dpi Beam attenuator Galvo Mirrors, Safety shutter included Exhaust Integrated fume extractor with Rheostat control, filter layers and exhaust indicators Software specifications Operating system Wndows 2000 and XP, Pentium IV, 500-Mhz, 150 MB hard drive, USB Interface Graphics All standard dimensional, PLT, DXF, BMP, JPG,PCX, WMF, EPS, TIFF. all elements can be scaled, moved, grouped or mirrored Barcodes 1D - Code 39, Code 93, Code 128, Data Matrix - ECC200, QRCode Characters All true type fonts under Windows, filled, out lined, laser specific double or triple line fonts. All fonts can be scaled or wobbled stretching, compressing, circular arc Integration capabilities Industry standard ERP/MRP systems, databases and programs Product order code Description LMS6000-130 Tyco Electronics LMS6000 laser - standard LMS6000-XYZ30 Direct part marking module 300mm x 300mm LMS6000-XYZ80 Direct part marking module 800mm x 800mm LMS6000-XYZ100 Direct part marking module 1000mm x 1000mm - fume extractor unit LMS6000-FE-110V Integrated fume extractor system Verifier/Validator Part No. LMS6000-VRF-100, integrated data matrix verifier/validator 142 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Laser Marking Systems Hardware/Software Printers LMS-9000 Laser Marking System The LMS-9000 laser marker is a low maintenance laser marking system designed for high volume users. It is a highly automated sys- tem including cutting to length, postmark rewinding and double sided, one step sleeve marking. Integrated with WinTotal marker sleeve/label marking software, it is designed for Tyco Electronics wire identification sleeves and selected labels. Features and benefits � Simultaneous double-sided laser marking option for marker sleeves saves considerable time and eliminates any margin for error � Optional handling system designed to handle several Tyco Electronics products � Laser marking and cutting for kitting in one integrated step eliminates post print cutting and kitting � Virtually no product wastage during marking, thanks to a state of the art product recognition and jogging system � Optional scoring and marking feature for label products � Modular design for easy placement and re-installation � Fully integrated software and hardware � On screen diagnostics � Meets all relevant US and European laser equipment standards � Laser parameters pre-set and software controlled Tyco Electronics also offers a pre-printing service to customers who need high quality, durable, permanent laser markers, yet do Product order code Description not want to invest in the purchase of LMS-9000 equipment at Tyco Electronics TTDS-057 this time. All pre-printed laser markers, labels or tags are produced LMS-9000 Tyco Electronics LMS-9000 laser – standard to out exacting quality, manufacturing standards and meet *Please contact your local Tyco Electronics represen- applicable mark permanence specifications. A variety of System tative for product configuration per your application. Six and HSI products including TMS-SCE, D-SCE, HT-SCE, HL and See page 168 for Laser Markable Label Materials and ordering information. HLX are available for pre-print base materials along with many label materials. Please contact your local Tyco Electronics representative to find out more about our laser pre-print services. 143 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Laser Marking Systems Hardware/Software Accessories BSC-100 Barcode scanners Tyco Electronics BSC-100 barcode scanners are cost effective, full General specifications featured, and fast barcode readers. These combine high image Symbologies 2 Dimensional: transfer speed with exceptional image quality. Their omni- PDF417, MicroPDF417, MaxiCode, directional reading capability allows fast and easy reading of EAN- DataMatrix, QR Code, Aztec, Aztec Mesas, UCC composite codes, 2-dimensional (PDF417, datamatrix) and Code 49 and EAN-UCC composite Postal codes. It comes with USB connection ready to "point and Linear: shoot" at a complicated looking 2-dimensional barcode or a simple Codabar, Code 39, Interleaved 2 of 5, linear code. It can be used in a wide range of commercial and Code 93, Code 128, UPC, EAN, RSS, and industrial applications within government/postal, military, Codablock healthcare, logistics, manufacturing and retail sectors. Postal: Postnet, Planet Code, British Post, Canadian Post, Japanese Post, KIX OCR fonts: OCR-A, OCR-B Power Requirements 4.5 - 12 VDC - powered through USB port Physical Dimensions 81mm W x 135mm L x 157mm H (3.2" W x 5.3" L x 6.2" H) Weight 184.3g (6.5 oz) Product order code Description BSC-100 Barcode scanner - standard 144 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Scanners and Imagers Hardware/Software Accessories BSC-200 Hand held imager The BSC-200 imager is a portable hand held solution for reading Imager specifications both linear bar codes and 2D symbols. The BSC-200 reads a wide Imager dimensions 33mm H x 46mm W x 109mm D range of bar code symbols created from a variety of printing and (1.3” H x 1.8” W x 4.3” D) marking methods. Imager weight: 71.5 g (2.5 oz) not including cable Handle dimensions 96.5 mm H x 30 mm W x 36 mm D • Read Area: (1.8” H x 1.2” W x 1.4”D) The BSC-200 imager’s advanced “dual decode zone” Handle weight: 59.8 g (1.2 oz) not including cable technology allows the user to easily capture 2D symbols and lin- ear bar codes at varying distances from 2” to 20” (50.8mm to Environmental 508mm). This wide read area allows the symbols to be decod- Operating temperature 0˚C to 40˚C (32˚F to 104˚F) ed fast and reliably. Storage temperature -20˚C to 60˚C (-4˚F to 140˚F) Fast processing speeds also add to the BSC-200’s ability Humidity 5% to 90% (non-condensing) to acquire and decode multiple symbologies, with no adjust- ment of the imager required. Electrical • Ease of use: Power requirements 5 VDC (mA) BSC-200 imagers feature point-and-click targeting with Typical: 310 a red laser spot to quickly center the symbol in the field Peak: 310 of view. Beeper, vibrator and multi-purpose LEDs provide real- Sleep 3 time feedback to signal successful decoding. • Applications: Read Parameters The BSC-200 imager is a strong reading solution for Pitch ±60˚C (front to back) applications needing to read linear bar codes and 2D Skew ±60˚ symbologies with a portable handheld device. Tilt 360˚ • System Integration: Focal Range 50.8mm to 508mm (2” to 20”) BSC-200 imagers are available in 2 configuration options: Rotational Tolerance ±180˚ - Batch: A wireless way to collect thousands of decoded sym- Print Control Resolution 25% (bar codes), 35% (PDF417), bols for later download, capable of performing more than absolute dark/light reflectance differential 4000 reads from a single battery charge and buffers a mini- measure at 650 nm mum of 1 MB of data in nonvolatile memory. Target Beam Visible laser diode at 630 nm, Class 2 (battery purchased separately) Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux - Cabled: Cabled units include USB, RS-232. Shock Withstands multiple drops of 2m (6.5’) (RS-232 available through the purchase of optional to concrete connector kit - contact Tyco Electronics) Product Order Code • Symbologies: BSC-200 Hand held imager The BSC-200 automatically discriminates between all major 2D matrix and linear bar code symbologies, and offers time stamp capabilities for logging data. Symbologies include: 2D Symbologies: - MaxiCode - QR Code - Aztec Code - Data Matrix (ECC 200) Stacked Symbologies: - UCC Composite - PDF417 (with Macro support) - Micro PDF417 Linear Bar Codes: - Codabar - Codablock F - GoCode - Code 93 - RSS - Code 39 - Code 128 - Standard postal codes - UPC/EAN/JAN - Int 2 or 5 • BSC-200 Accessories: - Long-life 1300 mA lithium-ion battery - Two-bay battery charger - RS-232 kit 145 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Scanners and Imagers Hardware/Software Accessories VLD-100 Hand held imager/validator The VLD-100 Imager/Validator is optimized to read both linear bar Imager specifications codes and 2D symbols. It is an aggressive hand held imager/val- Imager dimensions 33mm H x 46mm W x 109mm D idator for decoding symbols on low contrast substrates such as 1.3”H x 1.8”W x 4.3” D) metal, plastic, rubber, polyester, vinyl, Kapton, polyvinyl Imager weight: 71.5 g (2.5 oz) not including cable fluoride and glass. The VLD-100 can read marking methods such Handle dimensions 96.5 mm H x 30 mm W x 36 mm D as dot peen, thermal transfer and laser/chemical etch. Containing (1.8” H x 1.2” W x 1.4”D) custom optics and Tyco Electronics' decode algorithms, the VLD- Handle weight: 59.8 g (1.2 oz) not including cable 100 combines the decoding power of Tyco Electronics'popular smart camera, VRF-100, into a portable hand held device. Environmental • Optical Options: Operating temperature 0˚C to 40˚C (32˚F to 104˚F) The VLD-100 hand held imager/validator is available in: Storage temperature -20˚C to 60˚C (-4˚F to 140˚F) - The high resolution version is custom designed to Humidity 5% to 90% (non-condensing) optimize resolution for reading small 2D symbols. • LightRay Optics Accessory: Tyco Electronic’s LightRay Optics solution further enhances its Electrical ability to read directly marked parts. By directing the illumina- Power requirements 5 VDC (mA) tion toward the symbol at off-axis angles, the LightRay Optics Typical: 310 increase symbol contrast and filters out texture noise. The Peak: 310 LightRay Optics are designed so that it is positioned at the cor- Sleep 3 rect focal distance and angle. No training is needed to find the best angles for reading low contrast symbols. Either optical Read Parameters accessory easily attaches on to the end of the VLD-100. Two Pitch ±60˚C (front to back) options are available: the LightRay Optics 100 Series and the Skew ±60˚ LightRay Optics 200 Series. Tilt 360˚ Focal Range 25 to 508 mm (1” to 20”) Rotational Tolerance ±180˚ Print Control Resolution 25% (bar codes), 35% (PDF417), absolute dark/light reflectance differential LightRay Optics 100 Series LightRay Optics 200 Series measure at 650nm generates off-axis diffuse generates dark field Target Beam Visible laser diode at 630 nm, Class 2 illumination illumination Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux Shock Withstands multiple drops of 2m (6.5’) • Ease of Use: to concrete The VLD-100 features point-and-click targeting with a red laser Product Order Code spot to quickly center the symbol in the field of view. Beeper, vibrator and multi-purpose LEDs provide real-time feedback to VLD-100 Hand held imager/validator signal successful decoding. • Applications: The VLD-100 provides outstanding performance validating challenging 2D codes. Automotive and Aerospace: reads codes marked on steel, iron, aluminum, rubber, and glass parts by laser etch, dot peen, metal stamp, and thermal transfer products. Electronics: reads codes laser etched on printed circuit boards and components. Department of Defense: reads UID codes on a variety of sub- strates. Software enables it to validate UII code format for suppliers and constructs the UID string for DoD operators • System Integration: All Tyco Electronics imagers are available in 2 • Symbologies: configuration options: The VLD-100 imager/validator reads all standard linear - Batch: A wireless way to collect thousands of decoded symbols bar codes plus: for later download, capable of performing more than 4000 reads 2D Symbologies: from a single battery charge and buffer a minimum of 1 MB of data - Data Matrix (ECC 0200) - QR Code in non-volatile memory. - MaxiCode - Aztec Code - Cabled: Cabled units include USB, RS-232. Stacked Symbologies: (RS-232 available through the purchase of optional - UCC Composite - PDF417 (Macro Support) connector kit - contact Tyco Electronics) - Micro PDF417 146 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Scanners and Imagers Hardware/Software Accessories VRF-100 Production ready data matrix verifier The VRF-100 is an ISO/IEC 15415 and AS9132-compliant Data Imager specifications Matrix verifier for use in production environments. The VRF-100 Imager dimensions 307 mm H x 127 mm W x 122 mm D helps to ensure that your marks will be verified accurately every (12.1” H x 5.0” W x 4.8” D ) time.Unlike most verifiers that are mounted on stands designed Environmental for the lab environment, the VRF-100 Verifier is a fully-contained, Operating Temperature 0˚C to 40˚C (32˚F to 104˚F) compact device that is easy to integrate into the production Storage Temperature -50˚C to 75˚C (-58˚F to 167˚F) environment. The VRF-100 Verifier is factory-calibrated to specific traceability standards with a fully-contained housing, making it Humidity Up to 90% (non-condensing) easy to integrate into existing applications. No on-site calibration Electrical of optics or lighting is needed to verify marks with the Verifier. Power Requirements Input, 10 to 28 VDC, 200 mV- P-P max. Simply present the part to the Verifier, trigger, and receive the ripple, 270 mA at 24 VDC (typ. CMOS), symbol quality report. 333 mA at 24 VDC (typ. CCD) Trigger, New Master, Input 1: (Optoisolated) • Production-Ready 5 to 28 VDC rated (12 mA at 24 VDC) It is the first 2D verifier designed specifically for use in a produc- Outputs 1/2/3: (Optoisolated) 1 to 28 tion environment. Its compact, lightweight design makes the VDC rated, (I < 100 mA at 24 VDC, CE Verifier easy to integrate into production processes. A self- current limited by user) contained, factory-calibrated system with flexible mounting Product Order Code allows the Verifier to be adapted to any application quickly and VRF-100* Data matrix verifier easily. • Calibrated System *not available in Europe, Middle East, or Africa It provides the user with a ready-to-use, ISO/IEC 15426-2 calibrated system. Simply present the part, trigger, and the Verifier will output the results. The user is not required to focus the optics, set the light angles. Fixed optics and pre-set illumina- tion angles make the verifier consistent, reliable and accurate. • Illumination Chamber The Verifier’s fully-enclosed illumination chamber provides the controlled lighting environment for accurate, repeatable verifica- tion. The chamber is specifically engineered to produce the illumination angles required by the ISO/IEC 15415 standard. • VRF Software Offers complete symbol verification reports in a variety of formats: PDF, CSV, HTML and RTF. • ISO/ICE 15426-2 Certified The Verifier is ISO/IEC 15426-2 certified. It is precisely engineered to meet rigorous verification standards, ensuring accurate and consistent verification. • ISO/IEC 15415 Compliant The Verifier provides verification of 2D symbols for parameters: - Symbol contrast - Fixed pattern damage - Modulation - Reference decode - Axial non-uniformity algorithms - Grid non-uniformity - Unused error - Print growth (ungraded) correction • AS9132 Verifies Data Matrix symbols in accordance with the parameters called out in the AS9132 standard: - Quiet Zone - Dot ovality - Cell fill - Contrast - Dot center offset - Angle of distortion - Symbol type • MIL-STD 130 Requires verification of Data Matrix symbols to both ISO/IEC 15415 and AS9132 standards as required by the MIL STD 130 specification. 147 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Scanners and Imagers Hardware/Software Ribbons Thermal transfer ribbons General specifications RJS-4RPSCE Ribbon width 110 mm (4.33 inches) Tyco Electronics RJS-4RPSCE Ribbon length 300 meters (984 feet) is a high durability black resin Ink Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics TMS-SCE, RPS and Compatible printers T308S, T312M, T312Z**, T408M, T612M-DS, T312S HL cable markers wire marker Compatible materials TMS-SCE, RPS, SB, HL, HS, HC sleeve products. For reliable **Not available in Europe, Middle East or Africa print performance and durabili- Ordering information ty use with Tyco Electronics Product order code TMS-RJS-RIBBON-4RPSCE recommended compatible Description Tyco Electronics 4RPSCE thermal transfer ribbon for T308S, T312S, T312M, T312Z**, printers. T408M and T612M-DS printers **Not available in Europe, Middle East or Africa 101-4RPSCE General specifications Ribbon width 110 mm (4.33 inches) Tyco Electronics 101-4RPSCE Ribbon length 74 meters (242 feet) is a high durability black resin Ink Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics TMS-SCE, RPS wire Compatible printers T208M, T212M marker sleeve products and SB Compatible materials TMS-SCE, RPS, SB self-laminating labels. For Ordering information reliable print performance and durability use with Tyco Product order code TMS-101-RIBBON-4RPSCE Electronics recommended Description Tyco Electronics 4RPSCE thermal transfer ribbon for T208M and T212M printers compatible printers. General specifications RJS-4HT Ribbon width 110 mm (4.33 inches) Tyco Electronics RJS-4HT is a Ribbon length 300 meters (984 feet) high temperature black resin Ink Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics HT-SCE high Compatible printers T312M, T408M, T612M-DS temperature wire marker Compatible materials HT-SCE, HTCM-SCE-TP (T312M only) sleeve products. For reliable Ordering information print performance and Product order code TMS-RJS-RIBBON-4HT durability use with Tyco Description Tyco Electronics 4HT thermal transfer ribbon for T312M, T408M and T612M-DS printers Electronics recommended compatible printers. 148 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Thermal transfer ribbons General specifications 101-4HT Ribbon width 110 mm (4.33 inches) Tyco Electronics 101-4HT is a Ribbon length 74 meters (242 feet) high temperature black resin Ink Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics HT-SCE high Compatible printers T208M, T212M temperature wire marker Compatible materials HT-SCE sleeve products. For reliable Ordering information print performance and Product order code TMS-101-RIBBON-4HT durability use with Tyco Description Tyco Electronics 4HT thermal transfer ribbon for T208M and T212M printers Electronics recommended compatible printers. General specifications 1910 Ribbon width 110 mm (4.33 inches) Tyco Electronics 1910 is a Ribbon length 210 meters (689 feet) high durability high contrast Ink Resin/wax resin/wax thermal transfer Standard color Black ribbon tested and approved for Ribbon wind direction Ink side out use on the HLX-zero halogen Compatible printers T408M cable marker tape and the Compatible materials HLX, HXTM-FB HXTM-FB rail tags. For reliable Tyco Electronics TTDS-080 print performance use with Ordering information Tyco Electronics Product order code 1910-RIBBON-4T300 recommended printers. Description Tyco Electronics 1910 thermal transfer ribbon for T408M printers General specifications 1966 - RIBBON Tyco Electronics TTDS-099 Tyco Electronics Ribbon width 100 mm (3.9 inches) 1966-RIBBON is an ultra- high Ribbon length 300 meters (984 feet) durability black resin thermal Ink Resin transfer ribbon tested and Standard color Black approved for use on Tyco Ribbon wind direction Ink side out Electronics HX, HX-SCE and Compatible printer T312M D-SCE wire marker sleeves as Compatible materials CM-SCE-TP, D-SCE, HLX, HS, HX, HXTM-FB, HX-SCE, HL well as CM-SCE-TP and HLX cable markers. See right for Ordering information compatible materials. For Product order code 1966-RIBBON reliable print performance and Description Tyco Electronics 1966 thermal transfer ribbon for T312M durability use with Tyco Electronics recommended compatible printers. General specifications T200-RIBBON-1966 Ribbon width 100 mm (3.9 inches) Tyco Electronics T200- Ribbon length 74 meters (242 feet) RIBBON-1966 is an ultra- high Ink Resin durability black resin thermal Standard color Black transfer ribbon tested and Ribbon wind direction Ink side out approved for use on Tyco Compatible printers T212M Electronics HX-SCE wire Compatible materials HX-SCE, D-SCE, HLX-NEL marker sleeves. See right for compatible materials. For Ordering information reliable print performance and Product order code T200-RIBBON-1966 durability use with Tyco Description Tyco Electronics 1966 thermal transfer ribbon for T212M Electronics recommended compatible printers. 149 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Thermal transfer ribbons 1330-0606 General specifications Ribbon width* 110 mm (4.33 inches) Tyco Electronics 1330-0606 Ribbon length 300 meters (984 feet) is a high durability black resin Ink Wax/Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics thermal transfer printable pressure sensitive Compatible printers T308S, T312M, T312S, T312Z**, T408M labels. See right for compatible Compatible materials SB, NC, WP, HW, MP, HM, MV materials. For reliable print per- * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa formance and durability use Ordering information with Tyco Electronics recommended compatible Product order code 1330-0606-10 printers. Description Tyco Electronics RHQ thermal transfer ribbon for all T300 and T400 printers General specifications 1330-0607 Ribbon width* 110 mm (4.33 inches) Tyco Electronics 1330-0607 Ribbon length 300 meters (984 feet) is a high durability black resin Ink Resin thermal transfer ribbon tested Standard color Black and approved for use on Tyco Ribbon wind direction Ink side out Electronics thermal transfer Compatible printers T308S, T312M, T312S, T312Z**, T408M printable pressure sensitive labels. See right for compatible Compatible materials CP, HM, HMM, HPK, HW, MP, MV, NC, PVF, TN, TTP, WP, WV, TP, HLTM, SP materials. For reliable print per- * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa formance and durability use Ordering information with Tyco Electronics Product order code 1330-0607-10 recommended compatible printers. Description Tyco Electronics RHD thermal transfer ribbon for all T300 and T400 printers 1330-0607-T200 General specifications Ribbon width 110 mm (4.33 inches) Tyco Electronics 1330-0607- Ribbon length 74 meters (242 feet) T200 is a high durability black Ink Resin resin thermal transfer ribbon Standard color Black tested and approved for use on Ribbon wind direction Ink side out Tyco Electronics thermal trans- Compatible printers T208M, T212M fer printable pressure sensitive Compatible materials HM, HMM, HW, MP, MV, NC, TN, TTP, WP, WV,HPK labels. See right for compatible materials. For reliable print performance and durability Ordering information use with Tyco Electronics Product order code 1330-0607-T200 recommended compatible Description Tyco Electronics RHD thermal transfer ribbon for T208M and T212M printers printers. General specifications 1330-0619 Ribbon width* 110 mm (4.33 inches) Tyco Electronics 1330-0619 Ribbon length 300 meters (984 feet) is a high temperature black Ink Resin resin thermal transfer ribbon Standard color Black tested and approved for use on Ribbon wind direction Ink side out Tyco Electronics thermal trans- ® Compatible printers T308S, T312M, T312S, T312Z**, T408M fer printable Kapton labels. Compatible materials T1K, T2K, TSK, T2Y, KTT See right for compatible mate- * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa rials. For reliable print perform- ance and durability use with Ordering information Tyco Electronics recommend- Product order code 1330-0619-10 ed compatible printers. Description Tyco Electronics RHT thermal transfer ribbon for all T300 and T400 printers 150 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Thermal transfer ribbons General specifications 1330-0600 Ribbon width* 110 mm (4.33 inches) Tyco Electronics 1330-0600 Ribbon length 300 meters (984 feet) is a high quality black wax ther- Ink Wax mal transfer ribbon tested and Standard color Black approved for use on Tyco Ribbon wind direction Ink side out Electronics thermal transfer Compatible printers T308S, T312M, T312S, T312Z**, T408M printable paper labels. See Compatible materials EP right for compatible material. * Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa For reliable print performance and durability use with Tyco Ordering information Electronics recommended Product order code 1330-0600-10 compatible printers. Description Tyco Electronics RS thermal transfer ribbon for all T300 and T400 printers General specifications 1330-0600-T200 Ribbon width 110 mm (4.33 inches) Tyco Electronics 1330-0600- Ribbon length 74 meters (242 feet) T200 is a high quality black Ink Wax wax thermal transfer ribbon Standard color Black tested and approved for use on Ribbon wind direction Ink side out Tyco Electronics thermal trans- Compatible printers T208M, T212M fer printable paper labels. See Compatible materials EP right for compatible material. For reliable print performance and durability use with Tyco Ordering information Electronics recommended Product order code 1330-0600-T200 compatible printers. Description Tyco Electronics RS thermal transfer ribbon for T200 printers General specifications 3300 Ribbon width* 110 mm (4.33 inches) Tyco Electronics 3300 is a Ribbon length 300 meters (984 feet) high durability black resin ther- Ink Resin mal transfer ribbon tested and Standard color Black approved for use on Tyco Ribbon wind direction Ink side out Electronics thermal transfer Compatible printers T308S, T312S, T312M, T312Z, T408M printable pressure sensitive labels. See right for compatible Compatible materials PVF, TTVF materials. For reliable print * Available in additional sizes by custom quotation performance and durability Ordering information use with Tyco Electronics Product order code 1330-3300-10 recommended compatible printers. Description Tyco Electronics 3300 thermal transfer ribbon for all T300 and T408M printers General specifications T300–WH Ribbon width 110 mm (4.33 inches) White resin based ribbons are Ribbon length 300 meters (984 feet) available to print on Tyco Ink Resin Electronics TMS-SCE wire Standard color White marker sleeve products. For Ribbon wind direction Ink side out print performance and Compatible printers T308S, T312S, T312Z**, T312M and T-408M durability use with Tyco Compatible materials TMS-SCE (T312M only), CP, TTP Electronics Electronics **Not available in Europe, Middle East or Africa recommended compatible printers. Ordering information Product order code T300–RIBBON–WH Description Tyco Electronics thermal transfer ribbon for T300 and T400 printers 151 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Thermal transfer ribbons General specifications T200–WH Ribbon width 110 mm (4.33 inches) White resin based ribbons are Ribbon length 70 meters (230 feet) available to print on Tyco Ink Resin Electronics TMS-SCE wire Standard color White marker sleeve products. For Ribbon wind direction Ink side out print performance and Compatible printers T208M, T212M durability use with Tyco Compatible materials TMS-SCE (T212M only) HM, MP, MV, TTP Electronics recommended compatible printers. Ordering information Product order code T200-RIBBON-WH Description Tyco Electronics thermal transfer white ribbon for T200 printers General specifications T300–WH–4HT Ribbon width 114 mm (4.49 inches) White resin based ribbons are Ribbon length 300 meters (984 feet) available to print on Tyco Ink Resin Electronics HT-SCE wire Standard color White marker sleeve products. For Ribbon wind direction Ink side out print performance and Compatible printers T312M durability use with Tyco Compatible materials HT-SCE Electronics recommended compatible printers. Ordering information Product order code T300–RIBBON–WH–4HT Description Tyco Electronics thermal transfer white ribbon for all T308M. T312M and T408M printers General specifications T200–WH–4HT Ribbon width 110 mm (4.33 inches) White resin based ribbons are Ribbon length 74 meters (242 feet) available to print on Tyco Ink Resin Electronics HT-SCE wire Standard color White marker sleeve products. For Ribbon wind direction Ink side out print performance and Compatible printers T212M durability use with Tyco Compatible materials HT-SCE Electronics recommended compatible printers. Ordering information Product order code T200–RIBBON–WH–4HT Description Tyco Electronics thermal transfer white ribbon for T200 printers General specifications RHCA Ribbon width 110 mm (4.33 inches) RHCA resin based ribbons are Ribbon length 91 meters (300 feet) specifically designed to print Ink Resin on polyester or metalized Standard color Red, Blue and Green (see ordering information below) polyester Tyco Electronics Ribbon wind direction Ink side out label products. For print Compatible printers T308S, T312M, T312S, T312Z** and T408M performance and durability Compatible materials CP, HW, HM, HPK, HMM, MP, MV, PVF, WP, WV use with Tyco Electronics **Not available in Europe, Middle East or Africa recommended compatible printers. It is not suitable to Ordering information print on paper or Product order codes 1330-0620-10 (Red) 1330-0621-10 (Blue) 1330-0622-10 (Green) self-laminating products. Description Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers 152 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Thermal transfer ribbons General specifications RHCB Ribbon width 110 mm (4.33 inches) RHCB wax-resin based Ribbon length 300 meters (9840 feet) ribbons are specifically Ink Wax-Resin designed to print on paper. Standard color Red, Blue and Green (see ordering information below) For print performance and Ribbon wind direction Ink side out durability use with Tyco Compatible printers T308S, T312M, T312S, T312Z** and T408M Electronics recommended Compatible materials EP compatible printers. * *Not available in Europe, Middle East or Africa Ordering information Product order codes 1330-0630-10 (Red) 1330-0631-10 (Blue) 1330-0632-10 (Green) Description Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers 153 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Dot matrix ribbons General specifications RIBBON A Ink Standard Tyco Electronics RIBBON A is a Standard color Black permanent black ink dot matrix Compatible printer LQ870 ribbon tested and approved for Compatible materials CM-SCE, D-SCE, RMK-6, RPS, TMS-SCE use on Tyco Electronics TMS- SCE wire marker sleeves and Ordering information RMK-6 products on the Product order code TMS-SYSTEM-SIX-RIBBON-A LQ870 printer. See right for Description Tyco Electronics dot matrix Ribbon A for LQ870 printer compatible materials. General specifications QUICK-DRY LQ870 Ink RI Quick-Dry Tyco Electronics Standard color Black QUICK-DRY LQ870 is a quick Compatible printer LQ870 drying indelible black ink dot Compatible materials C, DMVF, E, HLTM, K, M, NMX, PV, TW matrix ribbon tested and approved for use on Tyco Ordering information Electronics dot matrix printable Product order code 1330-0037-00 pressure sensitive labels on the Description Tyco Electronics Quick-Dry dot matrix ribbon for LQ870 printer LQ870 printer. See right for compatible materials. 154 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Ribbons Dot matrix ribbons General specifications STANDARD AM6310 Ink Standard Tyco Electronics Standard color Black STANDARD AM6310 is a Compatible printer AM6310, AM6310D permanent black ink dot matrix Compatible materials CM-SCE, D-SCE*, HC, HL, HLTM-FB, HM, HS, RMK-6, RPS*, TMS-SCE*, MultiMark ribbon tested and approved for use on Tyco Electronics wire Ordering information marker sleeves and cable Product order code 1892BK04-RIBBON marker products on the Description Tyco Electronics standard dot matrix ribbon for AM6310 printer AM6310 printer. See right for * Available only with AM6310D models compatible materials. HIGH-PERF AM6310 General specifications Ink High performance Tyco Electronics HIGH-PERF Standard color Black AM6310 is a high perform- Compatible printer AM6310, AM6310D ance, permanent black ink dot Compatible materials HM, HX matrix ribbon tested and approved for use on Tyco Ordering information Electronics wire marker sleeves Product order code 1892BK03-HIGH-PERF-RIBBON and cable marker products on Description Tyco Electronics high performance dot matrix ribbon for AM6310 printer the AM6310 printer. See right for compatible materials. General specifications QUICK-DRY AM6310 Ink RI Quick-Dry Tyco Electronics Standard color Black QUICK-DRY AM6310 is a Compatible printer AM6310, AM6310D quick drying indelible black ink Compatible materials C, DMVF, E, HLTM, HPC, HPTM, K, M, NMX, PV, TW dot matrix ribbon tested and Ordering information approved for use on Tyco Electronics dot matrix printable Product order code 1892BK01 pressure sensitive labels on the Description Tyco Electronics Quick-Dry dot matrix ribbon for AM6310 printer AM6310 printer. See right for compatible materials. 155 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Ribbons Hardware/Software Software WinTotal Wire marker and label printing software WinTotal software is a powerful 32-bit label/marker design package that makes wire marker printing simple in an industrial environment. Running in the familiar Windows environment, the package is pre-loaded with all the Tyco Electronics wire identification products to facilitate marker design. The software features a highly graphical user interface to simplify operator training and minimize errors. The Windows environment gives access to a huge array of font options, including non-English fonts such as Chinese, Japanese and Hebrew (when used with appropriate operating systems or add-on software), and also allows simple importing and manipulation of graphics and logos. Bar code printing is available. WinTotal software supports all common wire identification needs, including: � Manual printing � Automatic set printing from spreadsheets, databases or other CAD systems (including Tyco Electronics’s ® HarnWare harness design software package) � Incremental alpha and numeric fields � Double-sided marker printing � Automatic or manual routing or multiple printers � Paper output option � Wraparound marker production � User-defined products � Programmable buttons for repeated data insertion The software can be password protected at different levels to prevent unauthorized use, and can be run on networked computers so that the design function can be separated from printing. The display can be set to several different languages, and a full on-screen Help function is incorporated. Running behind the simple WinTotal user interface is a powerful label-making package, so the software can be used to design and print general labeling applications such as rating plates and shipping labels. Features and benefits � Powerful wire marker design and print software � Familiar Windows user environment � Pre-loaded with Tyco Electronics identification products � Powerful import and export functions: reads wire lists from spreadsheets, databases and text files from CAD systems � Printer multi-tasking � Multiple on-screen languages Specifications TTDS-001 156 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Software Hardware/Software Software WinTotal Wire marker and label printing software Features and benefits (continued) � Double sided marker printing Support � � Local or network printer support Free technical support � � Number of identical or serialized copies selectable OS Support: Windows 95, 98, ME, NT, 2000, XP � from database International language support Serialization Label design � � Increment or decrement by any interval WYSIWYG label design and display � � Numeric, alphanumeric and custom base serialization Align text left, right, justified or center � Built-in printer font support Database options � Windows True Type fonts � Microsoft ODBC support, including: Access, Excel and dBase � Lines, boxes and graphic images � ASCII text files � Resize, rotate and stretch text, graphics and bar codes � AutoCAD importing � Thumbnail preview of saved labels Data management Printing � Visual Basic scripting for custom data processing. � Set and batch printing capabilities � Sharable data fields � Multiple application port printing (MAPP) � Multiple products within one set or batch Minimum recommended computer configuration Computer IBM-compatible PC ® Processor Intel Pentium processor, 400 MHz minimum RAM 64 MB minimum (128 MB for Windows NT, 2000 and XP) Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP Disk space required 25 MB minimum Other technical information Barcode types Codabar, code 39, code 93, code 128, EAN-13, EAN-8, UPC-E, Interleaved 2/5, ITF (DUN14), PDF 417, DataMatrix Company logo or graphics Can be imported in BMP, PCX, MSP, WMF, JPG, JIF, GIF formats Text and graphics Can be rotated, moved or resized Ordering information Ordering description Product description TMS-WINTOTAL-SWARE Tyco Electronics Wire Marker Printing Software – Windows, 32 bit 157 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Software Hardware/Software Software PrintEasy Label printing software Tyco Electronics PrintEasy is a powerful yet easy to use Windows based label design and printing software. With PrintEasy you can quickly and easily combine bar codes, text and graphics into professional quality labels. Carefully organized menus and pop-up dialogs display all your options in plain, easy to understand words. The true WYSIWYG display allows you to create and view your labels with precision, giving you total control over your labels’ appearance before printing. PrintEasy is ideal for use with the Tyco Electronics range of thermal transfer printable pressure sensitive label products. PrintEasy is pre-loaded with all of Tyco Electronics’s standard thermal transfer label templates, which allows you to sim- ply select the Tyco Electronics part number you want to print and you are ready to go! Features and Benefits Support Bar codes � � Free technical support Numerous 1D and 2D symbologies � � OS Support: Windows 95, 98, ME, NT, 2000, XP Unlimited width and height � � International language support Sequentially numbered bar codes � Place characters above or below bar codes or Label design do not print � True WYSIWYG label design and display � Option to display Start/Stop characters � Built-in printer font support � Able to print MIL-STD-130 UID Syntax � Windows True Type fonts Printing � Reverse (white on black) text printing � Printer-based bar codes and serial numbers � Align text left, right, justified or center � Speed optimization using repetitive data control � Unlimited Undo/Redo command � Local or network printer support � Lines, boxes and graphic images � Performance-enhancing printer controlled serialization � Import graphics in BMP, JPG, TIF, PCX, DCX, DIB, � EPS and others Number of identical or serialized copies selectable from database � Resize, rotate and stretch objects � Thumbnail preview of saved labels. � Metric and US measurement systems Specifications TTDS-093 158 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Software Hardware/Software Printers PrintEasy Label printing software Features and Benefits (continued) Serialization Data management � � Increment or decrement by any interval Visual Basic scripting for custom data processing � � Separate Rollover/Rollunder and Value Reset options User-definable minimum and maximum field lengths � � Preserve or expand field length when rolling over Customizable data-entry filters and error checking � � Numeric, alphanumeric and custom base serialization Multi-data source selection per label object � Easy entry of special and unprintable control characters Database options � Sharable data fields � Microsoft ODBC support, including: Access, Btrieve dBase, Excel, Oracle, Paradox, Clipper, FoxPro, � Customizable message box handling Interbase and more. Integration � ASCII text files � Command line interface option � SAP (mySAP.com and R/3) � Pre-loadable into “background” to avoid start-up delays � Versatile multiple-table data access � Dynamically selectable label formats and data sources � Import variable graphics from databases � � Error logging Data query wizard � Individual record-picking at print time Minimum recommended computer configuration Computer IBM-compatible PC ® Processor Intel Pentium processor, 200 MHz minimum RAM 32 MB minimum Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP Disk space required 15MB to 80 MB minimum (depending on installation options) Ordering information Ordering description Product description PRINTEASY –BASIC Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet printers** PRINTEASY –ECC4 Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser, Inkjet, ECC4 and T200 printers** PRINTEASY –PRO Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support PRINTEASY –SUITE Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support with additional modules PRINTEASY –NET05 Tyco Electronics Label Printing Software – Windows, – Network version with 5 user license PRINTEASY –NET10 Tyco Electronics Label Printing Software – Windows, – Network version with 10 user license **Available in Europe, Middle East and Africa 159 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Software Hardware/Software Application Systems HL2010E/HL1910E The HL2010E and HL1910E Hot air heaters are designed to work with a standard line voltage (230V) on a wide variety of Raychem heat-shrinkable products. These tools are suitable for occasional use and are not recommended for applications requiring high duty cycles. Both tools supply forced hot air with an adjustable heat set- ting to meet the requirements of many different installation situa- tions. A three position switch controls the air flow (150/300/500 l/min). The HL2010E tool is switched on and off at the three-stage switch and the temperature can be continuously adjusted over a range of 50˚C -630˚C by the pushbuttons. The temperature can be increased or reduced by 10˚C steps. An LCD display shows the actual temperature. The HL1910E tool is switched on and off at the two-stage switch and the temperature can be continuously adjusted over a range of 50˚C - 600˚C at the thumbwheel (the numbers on it serve as a guide only, 1 means 50˚C and max. temperature of 600˚C is attained at 9). Specifications Voltage 230V AC A bench stand allowing use of both the HL2010E and the Power 2000W HL1910E as a bench tool is available as an option. Furthermore, it Air flow 150 - 500 l/min requires only two reflectors to cover most applications of heat- Weight 920g shrinkable tubing and SolderSleeve terminations. Length 280mm Noise <70 dB *Available in Europe only Ordering description Product description PCN HL2010E-230V tool HL2010E-230V-Euro C99451-000 HL2010E-230V-UK A22932-000 HL2010E-Kit-230V-Euro A23120-000 HL1910E-230V tool HL1910E-230V-Euro F30529-000 HL1910E-230V-UK F11734-000 HL1910E-Kit-230V-Euro A93538-000 Accessories HL2010E/HL1910E tool HL1802E-074616-SolderSleeve 832011-000 Terminators Reflector HL1802E-070519-Heat-shrinkable 022611-000 Tubings Reflector HL1802E-070618 -9mm Adaptor 930321-000 HL1802E-070717-14mm 868259-000 Reduction Nozzle HL1802E-070816-20mm 613361-000 Reduction Nozzle HL1802E-ADAP-PR-Adaptor 444817-000 for PR Series Reflector HL1802E - Bench-Std 717083-000 The HL2005E heatgun is supplied with a 3 year warranty statement by Steinel. This warranty does not apply when used in a manufacturing environment as opposed to a DIY environment. The 12 month warranty usually offered by Tyco on all tooling applies (see conditions in warranty statement). 160 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Application Systems Hardware/Software Cable Marker Tools and Accessories AMP-TY Nylon cable ties AMP-TY All-Nylon Cable Ties provide a strong, durable way to bundle and harness cable quickly and economically. They can be used on virtually any bundle configuration, in diameters ranging from 1/16 [1.58] to 10 [254.00]. AMP-TY Cable Ties are resist- ant to common solvents, alkalies, dilute acids, oils and greases. All packages are heat sealed to retain moisture. Do not open package until you are ready to apply the ties. Features and benefits � Self-locking application by hand or hand tool provides versatility � Tapered tip speeds up threading and reduces applied cost � Interior serrations help hold individual wires in place through friction � Tough, smooth nyon may be used in outdoor and indoor applications. Black, UV-resistant ties are rcommended for outdoor use Fast and Easy to Apply � Specific parts meet the requirements of MIL-S-23190. See MS3367 and MS3368 part number notations � All-nylon design eliminates metal components � Recognized under the Component Program of Underwriters R� Laboratories Inc., File No. E73541 1. Gather cables together. 2. Apply hand-tight. 3. Snug-up with tool. 4. Finished tie holds cables firmly. 161 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Application Systems Hardware/Software Cable Marker Tools and Accessories AMP-TY Nylon cable tie accessories Accommodates ties with maxi- Cable Tie Mount mum tensile strength of 50 lbs. (Screw Type) [222.5 N] P Pa ar rt t N No o. . 1 1- -3 35 50 00 08 87 7- -0 0 Package of 100 P Pa ar rt t N No o. . 2 2- -3 35 50 00 08 87 7- -0 0 Package of 1000 Note: Screw not included Two-Way 0.38 [9.65] x 0.6 [15.24], #6 Cable Tie Mount Screw Hole, without Adhesive Back. Accommodates ties with Permits entry from two sides. maximum tensile strength of 50 Available in two sizes. lbs. [222.5 N] P Pa ar rt t N No o. . 6 60 08 88 80 01 1- -1 1 R� Package of 100 1.13 [28.70] x 1.13 [28.70] , #6 Screw Hole, with Adhesive* Back. Accommodates ties with maxi- mum tensile strength of 50 lbs. [222.5 N] P Pa ar rt t N No o. . 6 60 08 88 80 00 0- -1 1 Package of 100 0.75 [19.05] x 0.75 [19.05], two Four-Way #4 Screw Holes, with Adhesive* Cable Tie Mount Back. Accommodates ties with Permits entry from four sides. maximum tensile strength of 30 Available in two sizes. lbs. [133.5 N] P Pa ar rt t N No o. . 6 60 08 88 80 02 2- -1 1 Package of 100 1.13 [28.70] x 1.13 [28.70], two #8 Screw Holes, with Adhesive* Back. Accommodates ties with maximum tensile strength of 50 lbs. [222.5 N] P Pa ar rt t N No o. . 6 60 08 88 80 03 3- -1 1 Package of 100 Cable Tie 1 [25.4] x 1 [25.4], two 0.187 Swivel Mount [4.75] Dia. Screw Holes, with Adhesive Back. Accommodates with Adhesive Back ties with maximum and Screw Holes tensile strength of 30 lbs. [133.5 (0.187 [4.75] Dia.) N] P Pa ar rt t N No o. . 6 60 07 78 84 47 7- -1 1 Package of 100 *The rubber-based adhesive backing on these mounts has a tensile strength of 6 lbs. [26.7 N] per square inch. This rating applies in temperatures from -50°F [-45°C] to 180°F [82°C]. For best performance, mounts should be applied to a smooth, clean, dry, and oil-free surface. AMP-TY Application Tool Part No. 734587-1 (Color — blue) Economy IS 408-8816 Application Tool Tool operates on cable ties up to 50 lbs. [222.5 N] tensile value. It has a tensionadjustment and cuts off the end of the tie. 162 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Application Systems Hardware/Software Application Systems Engineering Notes 163 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Application Systems Hardware/Software