Signal Relays AXICOM Card SN Relay V23030 n Low profile, therefore particularly suited for flat pack components grouping n For relays with 1 or 2 form C (CO) contacts: - creepage and clearance distances between contacts and frame >5mm or >10mm (depending on the relay version) - dielectric strength between contacts and frame 4kV or 6kV rms rms Typical applications measuring and control systems, alarm and security equipment, road traffic and railway signaling systems Contact Data A104 A106 A204 A206 Contact Data (continued) 8 Contact arrangement 4 form C, 6 form C, 4 form C, 6 form C, Mechanical endurance aaprox. 10 operations (4 CO) (6 CO) (4 CO) (6 CO) 1) The current of 3 A for max 4s at 10% on-time. 2) Gold F on request only Max. switching voltage 250VDC 250VDC 30VDC 30VDC 3) Self inductance in accordance with IEC 255-0-20 250VAC 250VAC 36VAC 36VAC Limiting continuous current ≤50°C ambient 2A 2A 2A 2A Coil Data ≤75°C ambient 1A 1A 1A 1A Magnetic system neutral, monostable Limiting making/breaking current Coil voltage range 5 to 60VDC 1) 1) 3A 3A 0.2A 0.2A Max. coil temperature 110°C 2) 2) Contact material Ag, Ag, Gold F Gold F Thermal resistance 35K/W Au-flashed Au-flashed Contact style bifurcated contacts Coil versions, monostable Frequency of operation, without load max. 30 operations/s Coil Rated Operate Limiting Coil Rated coil Operate / release time approx. 8/2ms code voltage voltage Voltage resistance power Max. DC breaking capacity (contacts Ag, gold flashed) 4/6 pole 4) Curve 1: arc extinguished within contact transit period (limit curve I) VDC VDC VDC Ω±10% mW Curve 2: safe breaking, erc extinguished (limit curve II) 032 5 3.3/4.0 10.8 38 658 012 6 3.9/4.6 12.4 50 720 017 12 7.8/9.5 24.0 185 778 021 24 15.5/18.5 47.0 730 789 4) 026 48 32/37 88.0 2700 853 4) 014 60 38/45 109.0 4100 878 4) Coil resistance ±15% All figures are given for coil without pre-energization, at ambient temperature +23°C The operating voltage limits U and U depend on temperature according to I II the following formula: U = k *U 20°C, U = k *U 20°C; t = ambient temperature, I tamb I I II tu II II amb U = minimum voltage at ambient temperature, I tamb U = maximum voltage at ambient temperature, k and k are factors. II tamb I II t 20°C 30°C 40°C 50°C 60°C 70°C amb k 1 1.04 1.085 1.13 1.17 1.21 I k 1 0.93 0.86 0.79 0.7 0.6 II Insulation Data Initial dielectric strength between coil and frame 500V rms Electrical endurance between contact and contact 1000V rms Type Load Operations between contact and frame 1000V rms 6 Ag, gold-flashed 2.4A, 24VDC, resistive appr. 1x10 between contact and coil 1000V rms 6 Ag, gold-flashed 3A, 24VDC, resistive appr. 0.3x10 6 Ag, gold-flashed 1.35A, 30VDC, resistive appr. 6x10 7 Ag, gold-flashed 0.85A, 40VDC, resistive appr. 2x10 7 Ag, gold-flashed 0.36A, 60VDC, resistive appr. 8x10 7 Ag, gold-flashed 0.21A, 110VDC, rersitive appr. 10x10 6 Ag, gold-flashed 2.4A, 24VDC, resistive+100μH3) appr. 1x10 6 Ag, gold-flashed 0.6A, 60VDC, resistive+100μH3) appr. 10x10 6 Ag, gold-flashed 0.24A, 110VDC, resistive+100μH3) 40x10 1 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Signal Relays AXICOM Card SN Relay V23030 (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70°C Category of environmental protection IEC 61810 RT I - dust protected, RT III - immersion cleanable Degree of protection, IEC 60529 IP30, IP67 Terminal type PCB-THT Weight V23030-Axxx approx. 12g V23030-Cxxx approx. 30g V23030-Hxxx approx. 25g V23030-Jxxx approx. 30g Ultrasonic cleaning not recommended Packaging unit 5 pcs. PCB layout / terminal assignment Bottom view on solder pins 4 form C (4 CO) contacts 6 form C (6 CO) contacts V23030-Axxxx-xx04 V23030-Axxxx-xx04 V23030-Hxxxx-xx04 V23030-Hxxxx-xx04 Hole M required only for relays with earth connection. Hole M required only for relays with earth connection. 2 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Signal Relays AXICOM Card SN Relay V23030 (Continued) Dimensions V23030-Axxx, 4 form C (4 CO) contacts, dust protected V23030-Hxxx, 4 form C (4 CO) contacts, immersion cleanable V23030-Cxxx, 6 form C (6 CO) contacts, dust protected V23030-Jxxx, 6 form C (6 CO) contacts, immersion cleanable 3 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Signal Relays AXICOM Card SN Relay V23030 (Continued) Product code structure Typical product code V23030 -A 1 021 -A1 04 Type V23030 Card SN Relay Contact arrangement A 4 form C, 4 CO, dust proof C 6 form C, 6 CO, dust proof H 4 form C, 4 CO, immersion cleanable J 6 form C, 6 CO, immersion cleanable Earth connection 1 Without earth connection 2 With earth connection Coils Coil code: please refer to coil versions table Contact material A1 Silver, gold flashed A2 Gold F Contact arrangement 04 4 form C, 4 CO 06 6 form C, 6 CO Other types on request Product code Version Coil Arrangement Enclosure Part number V23030-A1xxx, 4 pole, without earth connection, dust protected V23030-A1017-A104 4 pole, without earth conn. 12VDC 4 form C (4 CO) Dust protected 3-1393801-6 V23030-A1021-A104 4 pole, without earth conn. 24VDC 4 form C (4 CO) Dust protected 3-1393801-8 V23030-A1026-A104 4 pole, without earth conn. 48VDC 4 form C (4 CO) Dust protected 4-1393801-1 V23030-A2xxx, 4 pole, with earth connection, dust protected V23030-A2012-A104 4 pole, with earth conn. 6VDC 4 form C (4 CO) Dust protected 4-1393801-4 V23030-A2017-A104 4 pole, with earth conn. 12VDC 4 form C (4 CO) Dust protected 4-1393801-8 V23030-A2017-A204 4 pole, with earth conn. 12VDC 4 form C (4 CO) Dust protected 4-1393801-9 V23030-A2021-A104 4 pole, with earth conn. 24VDC 4 form C (4 CO) Dust protected 5-1393801-0 V23030-A2026-A104 4 pole, with earth conn. 48VDC 4 form C (4 CO) Dust protected 5-1393801-2 V23030-A2014-A104 4 pole, with earth conn. 60VDC 4 form C (4 CO) Dust protected 4-1393801-6 V23030-C1xxx, 6 pole, without earth connection, dust protected V23030-C1017-A104 6 pole, without earth conn. 12VDC 6 form C (6 CO) Dust protected 6-1393801-2 V23030-C1021-A104 6 pole, without earth conn. 24VDC 6 form C (6 CO) Dust protected 6-1393801-3 V23030-C1021-A204 6 pole, without earth conn. 24VDC 6 form C (6 CO) Dust protected 6-1393801-4 V23030-C1026-A104 6 pole, without earth conn. 48VDC 6 form C (6 CO) Dust protected 6-1393801-7 V23030-C2xxx, 6 pole, with earth connection, dust protected V23030-C2012-A104 6 pole, with earth conn. 6VDC 6 form C (6 CO) Dust protected 6-1393801-9 V23030-C2017-A104 6 pole, with earth conn. 12VDC 6 form C (6 CO) Dust protected 7-1393801-1 V23030-C2017-A204 6 pole, with earth conn. 12VDC 6 form C (6 CO) Dust protected 7-1393801-2 V23030-C2021-A104 6 pole, with earth conn. 24VDC 6 form C (6 CO) Dust protected 7-1393801-3 V23030-C2014-A104 6 pole, with earth conn. 60VDC 6 form C (6 CO) Dust protected 7-1393801-0 4 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions