TE CONNECTIVITY W31-X2M1G-10
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
W31-X2M1G-10
Industry Aliases
3-1393247-2, W31-X2M1G-10
Sub-Category
Circuit Breakers
Brand
P&B
Factory Pack Quantity
25
Datasheet

DDEController?Action=showdoc&DocId=Data+Sheet%7F1308242_W23W31%7F0905%7Fpdf%7FEnglish%7FENG_DS_1308242_W23W31_0905.pdf
90 KiB
Extracted Text
Catalog 1308242 Issued 3-03 (PDF Rev. 12-08) W23/W31 series Toggle or Push/Pull Actuator Thermal P&B Circuit Breaker W23 W31 Maximum Resistance vs. Current Rating @ +25°C Features • 0.5 amp to 50 amp ratings may be used as on/off switch. Current Maximum • Cannot be reset against overload. Rating Resistance • W23 has visible trip indicator band. in Amps in Ohms ± 30% • Screw termination. 1 .61 • Trip-free operation. 5 .03 10 .01 15 .006 Agency Approvals 20 .004 W23 and W31 are UL 1077 Recognized as Supplementary Protectors. 30 .003 File E69543, and CSA Accepted as Supplementary Protectors 40 .002 50 .002 (Appliance Component Protectors), File LR15734. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ +25°C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating, may trip between Endurance Cycling: More than 6,000 cycles at 100% of rating, or 10,000 101% and 134% of rating at 25°C. Must trip at 135% in mechanical cycles. one hour. Humidity: Will meet requirements of MIL-STD-202, Method 106. Maximum Operating Voltages: 50VDC or 240VAC (to 400 Hz). Salt Spray: Will meet requirements of MIL-STD-202, Method 101, Test Interrupting Capacity: Condition B. With 4X Max. Series Fuse Protection Termination: Two #8-32 screw terminals. 0.5-50 amp models — 1000 amps at 240VAC. Mounting: W23 — Threaded bushing, 3/8” (9.53mm) diameter. 30-50 amp models — 1000 amps at 50VDC. W31 — Threaded bushing, 15/32” (11.91mm) diameter, with or Without 4X Max. Series Fuse Protection without anti-rotation flats. 0.5-25 amp models — 2000 amps at 50VDC. Weight: Less than 2 oz. (57g). 10-20 amp models — 2000 amps at 120VAC. Resettable Overload Capacity: Ten times rated current. Dielectric Strength: Over 1,500 volts RMS. Time Vs. Current Trip Curve @ +25°C Ambient Compensation Chart 1.40 1000 (A) All 5-50 Amp Models (B) All 0.5-4 Amp Models 1.30 Overload Trip Times Overload Trip Times 900 100% No Trip 100% No Trip 1.20 (A) 135% Trip in 1 hour 135% Trip in 1 hour 800 200% 6.0-22 Sec. 200% 11-30 Sec. 1.10 400% 1.0-3.0 Sec. 400% 2.0-8.0 Sec. 600% 0.45-1.5 Sec. 600% 1.0-5.5 Sec. 700 800% 0.3-0.8 Sec. 800% 0.6-4.0 Sec. 1.00 0.25-0.6 Sec. 0.4-2.5 Sec. 1000% 1000% 600 0.90 500 0.80 (B) 400 0.70 0.60 300 –20–10 0 102030405060 200 Ambient Temperature In Degrees Centigrade (°C) 100 0 To use this chart: Read up from the ambient .1 1 10 100 1000 temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor Time In Seconds to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 116 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Correction Factor Catalog 1308242 Issued 3-03 (PDF Rev. 12-08) Ordering Information Typical Part No. B B W 23 -X 1A1 G -5 1. Designator: W = Circuit breaker 2. Series Number: 23 = Single pole, push/pull 3. Circuit Function: X = Series trip 4. Button: 1 = Black with white amp rate marking and white trip band. 5. Mounting Bushing: A = 3/8”-24 threaded bushing .375” (9.53mm) long, silver color 6. Terminals (See drawings for relative terminal positions): 1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed. 3 = Screw terminals situtated parallel to each other pointing upward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut installed G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 7.5 20 35 1 4 10 25 40 2 5 15 30 50 Stock Items – Authorized distributors are more likely to stock the following items. W23-X1A1G-1 W23-X1A1G-7.50 W23-X1A1G-25 W23-X1A1G-50 W23-X1A1G-2 W23-X1A1G-10 W23-X1A1G-30 W23-X1A1G-3 W23-X1A1G-15 W23-X1A1G-35 W23-X1A1G-5 W23-X1A1G-20 W23-X1A1G-40 Ordering Information B B Typical Part No. W 31 -X 2M1 G -5 1. Designator: W = Circuit breaker 2. Series Number: 31 = Single pole, toggle actuator 3. Circuit Function: X = Series trip 4. Mounting Bushing: 1 = 15/32”-32 threaded bushing .320” (8.13mm) long, round, silver color 2 = 15/32”-32 threaded bushing .320” (8.13mm) long, double “D” , silver color 5. Toggle: M = Silver color metal toggle, round, with amp rate marking on end 6. Terminals (See drawing for relative terminal positions): 1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed. 5 = Screw terminals situated parallel to each other pointing downward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut intalled G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 7.5 20 35 1 4 10 25 40 2 5 15 30 50 Stock Items – Authorized distributors are more likely to stock the following items. W31-X2M1G-1 W31-X2M1G-10 W31-X2M1G-35 W31-X2M1G-2 W31-X2M1G-15 W31-X2M1G-40 W31-X2M1G-3 W31-X2M1G-20 W31-X2M1G-50 W31-X2M1G-5 W31-X2M1G-25 W31-X2M1G-7.50 W31-X2M1G-30 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 117 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 12-08) W23 Outline Dimensions Terminal Style 3 Terminal Style 1 .046 (1.17) #8-32 SCREWS RESET BUTTON IN “ON” POSITION WITH WASHERS WHITE INDICATOR NOT VISIBLE .690 (17.53) 3/8-24 THREADED BUSHING AMP RATING 45° 45° .250 (6.35) .56 .56 (14.2) (14.22) 1.384 .315 Dia. 5 (35.15) (8.00) 0.9 .46 (2.29) (11.7) .03 MAX. .388 (.76) (9.86) .570 1.600 (14.48) (40.64) inches 1.890 All dimensions are given as .046 (mm) (48.01) (1.17) 2.035 (51.69) Mounting Hardware Suggested Mounting Holes Lockwasher Hex Nut Knurled Nut (88-006B - Silver Color) (55-001D - Silver Color) (55-008A - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .562 .562 .375-.386 (14.27) (9.53-9.80) (14.27) .078 .018 .545 – .567 .085 (1.98) (.46) (2.16) (13.84 – 14.40) W31 Outline Dimensions Terminal Style 1 Terminal Style 5 #8-32 SCREWS WITH WASHERS .03 MAX .690 (.76) AMP RATING (17.53) 15/32-32 THREADED BUSHING “ON” POSITION 45° .09 (2.3) .46 5 (11.7) 1.384 30° (35.15) REF. .56 .56 (14.2) (14.2) .335 (8.51) 45° “OFF” POSITION 1.600 .380 .625 (40.64) (9.65) (15.88) .046 .046 ANTI-ROTATION (1.17) 2.035 FLATS (1.17) (51.69) Mounting Hardware Suggested Mounting Holes Hex Nut Lockwasher Knurled Nut (55-001B - Silver Color) (88-002B - Silver Color) (55-010B - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .635 .470 .470 .600 (15.24) (16.13) (11.94) (11.94) .125 .018 .385 .545 – .567 .078 (3.18) (.46) (9.78) (1.98) (13.84 – 14.40) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 118 specified. Refer to inside back cover.
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the W31-X2M1G-10?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods