Infrared Light Emitting VCSEL OPR2800V Features:  High speed VCSEL  High output power  Narrow beam angle  Suitable for all types of high-speed data communications equipment  Also available as diode (OPR2800, OPR2800T) Description: The OPR2800V is a high performance 850 nm invisible VCSEL (Class 1M) with a flat lens window. Its high speed, high output power and concentric beam pattern make it an ideal transmitter for all types of high-speed data equipment applications. Please refer to Application Bulletins 221 and 224 for additional design information and reliability (degradation) data. Refer to Application Bulletin 237 Ordering Information Applications: Total Part LED Peak Laser Beam Packaging  Fibre channel Number Wavelength Class Angle  Gigabit Ethernet OPR2800V 850 nm 24° Class 1M Chip Tray  ATM  VSR (Very Short Reach)  Intra-system links Warning: Front 1  Optical backplane in- OPR2800V Window is pressure terconnects sensitive. Do not apply pressure or high vacuum to win- dow. 2 Pin # LED 1 Cathode 2 Anode General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 1 © TT electronics plc Infrared Light Emitting VCSEL OPR2800V Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A o o Storage Temperature Range -40 C to +100 C o o Operating Temperature Range 0 C to +85 C Maximum Forward Peak Current 20 mA Maximum Reverse Voltage 10 V Maximum Continuous Optical Power at 70° C 1.1 mW (1) Solder reflow time within 5°C of peak temperature is 20 to 40 seconds 250° C Notes: 1. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS V Forward Voltage 1.60 - 2.20 V I = 7 mA F F I Reverse Current - - 35 µA - R t t Output Rise Time, Output Fall Time - 100 - ps 20% to 80% r, f P Total Power Out 1.50 - - mW I = 7 mA OT F (1) I Threshold Current 0.80 - 3 mA TH (2) R Series Resistance 20 - 55 ohms S (3) η Slope Efficiency 0.28 - - mW/mA (4) - Linearity 0.00 - - - λ Wavelength at Peak Emission 840 850 860 nm - P Δλ Optical Bandwidth - - 0.85 nm - θ Beam Divergence - 24 - Degree I = 7 mA F N Relative Intensity Noise - -123 - db/Hz - RI (1) ΔI /ΔT Temp Coefficient of Threshold Current - ±1.0 - mA 0° - 70° TH Δλ/ΔT Temp Coefficient of Wavelength - 0.06 - %/°C 0° - 70°, I = 7 mA F ΔV /ΔT Temperature Coefficient for V - -2.5 - mW%/°C 0° - 70°, I = 7 mA F F F (3) Δη/ΔT Temperature Coefficient for Efficiency - -0.5 - %/C 0° - 70° Notes: 1. Threshold current is based on the two line intersection method specified in Telcordia GR468-Core. Line 1 from 4 mA to 6mA. Line 2 from 0 mA to 0.5 mA. 2. Series resistance is the slope of the voltage-current line from 5 to 8 mA. 3. Slope efficiency is the slope of the best-fit LI line from 5 mA to 8 mA, using no larger than 0.25 mA test interval points. 4. Using data points taken for slope efficiency above, ΔL/ ΔI shall be calculated for each adjacent pair of points. General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 2 © TT electronics plc Infrared Light Emitting VCSEL OPR2800V Performance OP2800V - Normalized Output Power vs Forward Current General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 3 © TT electronics plc