Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Features: • Narrow beam angle • High brightness LED • Water clear plastic package • UV resistant epoxy DescripƟon: Each device in the OVLG Series is a high intensity LED mounted in a clear plastic T-1¾ package. Each device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, these LEDs are useful in applications that require a higher on-axis brightness than that achievable with standard lamps. ApplicaƟons: • Indoor/outdoor applica�ons • Variable message boards • Store front signage • Indicators Part Number Material Emi� ed Color Intensity Typ. mcd Lens Color Blue 7,200 OVLGB0C6B9 InGaN Blue-Green 23,000 OVLGC0C6B9 Clear Red 14,000 OVLGS0C8B9 AlInGaP Yellow 14,000 OVLGY0C9B9 RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 1 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series o Absolute Maximum Ra� ngs (T = 25 C unless otherwise noted) A Storage Temperature Range -40 ~ +100 °C Opera� ng Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Blue, Blue-Green 25 mA Con� nuous Forward Current 50 mA Red, Yellow Peak Forward Current (10% Duty Cycle, 1 kHz) 100 mA Blue, Blue-Green 100 mW Power Dissipa� on Red, Yellow 120 mW Blue, Blue-Green -0.29 mA/° C Current Linearity vs Ambient Temperature Red, Yellow -0.72 mA/° C 125° C LED Junc�on Temperature Electrosta� c Discharge ClassiŢca� on (JEDEC-JESD22-A114F) Class 1C 1 Lead Soldering Temperature (3 mm from the base of the epoxy bulb) 260° C / 5 seconds o Electrical Characteris� cs (T = 25 C unless otherwise noted) A SYMBOL PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS Blue 4,360 7,200 ---- Blue-Green 11,970 23,000 ---- I Luminous Intensity I = 20 mA mcd V F 8,550 14,000 ---- Red Yellow 8,550 14,000 ---- Blue 2.6 3.2 4.0 Blue-Green V Forward Voltage V I = 20 mA F F Red 1.8 2.0 2.4 Yellow Blue Blue-Green I Reverse Current ---- ---- 10 µA V = 5 V R R Red Yellow Blue 460 470 475 Blue-Green 499 505 511 λ Dominant Wavelength nm I = 20 mA D F 620 623 630 Red Yellow 585 589 595 ---- 15 ---- Blue Blue-Green ---- 15 ---- 2Θ½H-H 50% Power Angle deg I = 20 mA F Red ---- 8 ---- ---- 8 ---- Yellow General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 2 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Standard Bins LEDs are sorted to luminous intensity (I ), forward voltage (V ), and dominant wavelength (λ ) bins shown. Each bag will V F D consist of a single intensity bin, single forward voltage bin and single dominant wavelength bin. Orders may be Ţlled with any of the intensity bins or color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Dominant Wavelength (nm) Luminous Intensity (I ) @ 20mA Forward Voltage (V ) @ 20mA V F Blue: OVLGB0C6B9 Blue: OVLGB0C6B9 Blue: OVLGB0C6B9 & IV Code Min (mlm) Max (mlm) nm Code Min (nm) Max (nm) Blue-Green: OVLGC0C6B9 0W 4,360 6,105 BC 460 465 VF Code Min (V) Max (V) 0X 6,105 8,550 BD 465 470 A 2.6 2.8 0Y 8,550 11,970 BE 470 475 B 2.8 3.0 0Z 11,970 16,758 C 3.0 3.2 D 3.2 3.4 Green: OVLGC0C6B9 Blue-Green: OVLGC0C6B9 E 3.4 3.6 nm Code Min (nm) Max (nm) IV Code Min (mlm) Max (mlm) F 3.6 3.8 HB 499 502 0Z 11,970 16,758 G 3.8 4.0 HC 502 505 Z1 16,758 23,500 HD 505 508 Z2 23,500 32,800 HE 508 511 Z3 32,800 46,000 Luminous Intensity (I ) @ 20mA Dominant Wavelength (nm) Forward Voltage (V ) @ 20mA V F Red: OVLGS0C8B9 Red: OVLGS0C8B9 Red: OVLGS0C8B9 & IV Code Min (mlm) Max (mlm) Yellow: OVLGY0C9B9 nm Code Min (nm) Max (nm) 0Y 8,550 11,970 VF Code Min (V) Max (V) RA 620 625 0Z 11,970 16,758 A 1.8 2.0 RB 625 630 Z1 16,758 23,500 B 2.0 2.2 Z2 23,500 32,800 C 2.2 2.4 Yellow: OVLGY0C9B9 nm Code Min (nm) Max (nm) Yellow: OVLGY0C9B9 IV Code Min (mlm) Max (mlm) YC 585 587 0Y 8,550 11,970 YD 587 589 0Z 11,970 16,758 YE 589 591 Z1 16,758 23,500 YF 591 593 Z2 23,500 32,800 YG 593 595 General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 3 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Typical Electro-Op� cal Characteris� cs Curves—Blue & Blue-Green General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 4 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Typical Electro-Op� cal Characteris� cs Curves—Red & Yellow General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 5 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Beam Angle: Packaging: 500 pcs per an� -sta� c bag with desiccant Desiccant Barcode Label General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 6 © TT electronics plc Sensing and Control High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Reliability Test LED lamps are checked by reliability tests based on MIL standards. 1. Test CondiƟons, Acceptable Criteria & Results ClassiŢca- Std. Test Acc / Rej Test Item Test CondiƟons DuraƟon Unit Result Ɵon Method Criteria Opera� on Life Test MIL-STD-750D Life Test T =25°C , I =30mA * 1000 Hrs 100 0 / 1 Pass A F (OLT) Method 1026.3 High Temperature MIL-STD-750D T =100°C 1000 Hrs 100 0 / 1 Pass A Storage (HTS) Method 1032.1 Low Temperature MIL-STD-750D T =—40°C 1000 Hrs 100 0 / 1 Pass A Storage (LTS) Method 1032.1 Temp. & Humidity MIL-STD-750D T =85°C , Rh=85% A 500 Hrs 100 0 / 1 Pass with Bias (THB) Method 103B I =20mA F Thermal Shock Test MIL-STD-750D 0°C ~ 100°C 100 cycles 100 0 / 1 Pass (TST) Method 1056.1 2min 2min Temperature Cy- MIL-STD-750D -40°C ~ 25°C ~ 100°C ~ 25°C 100 cycles 100 0 / 1 Pass cling Test (TCT) Method 1051.5 30min 5min 30min 5min MIL-STD-750D Solderability 235±5°C , 5 sec. 1 � me 20 0 / 1 Pass Method 2026.4 Resistance to Sol- MIL-STD-750D 260±5°C , 5 sec. 1 � me 20 0 / 1 Pass dering Heat Method 2031.1 Lead Integrity MIL-STD-750D Load 2.5N (0.25kgf) 3 � mes 20 0 / 1 Pass Method 2036.3 0°~90°~0° , bend Remark: ( * ) I = 30mA for AllnGaP chip; I = 20mA for InGan chip F F ( ** ) I = 20mA for AllnGaP chip; I = 10mA for InGan chip F F 2. Failure Criteria (T = 25°C): A Criteria for Judgment Test Item Symbol Test CondiƟons Min. Max Luminous Intensity I I = 20mA LSLx0.7 ** V F Forward Voltage V I = 20mA USLx1.1 * F F ( * ) USL: Upper Standard Level, ( ** ) LSL: Lower Standard Level General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue C 10/2015 Page 7 © TT electronics plc Environmental Test Mechanical Test