OVSA1xBLCR8 Series Features:  High intensity with low power consumption  PLCC4 packaged in 8 mm tape on 7” diameter reel  Compatible with automatic placement equipment  Dimensions: 3.2 x 2.7 x 1.95 mm  60° viewing angle Description: The OVSA1xBLCR8 series is designed for focused, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications:  Traffic lights  Signal and symbol luminaire  Mono-color indicators  Backlighting (LCD, switches, displays, illuminated advertising)  Interior automotive lighting (instrumentation clusters)  Safety marker lights (steps, exit ways) Intensity Part Number Material Emitted Color Lens Color Typ. mcd AlInGaP Amber 5000 Water Clear OVSA1ABLCR8 AllnGaP Red 3700 Water Clear OVSA1SBLCR8 DIMENSIONS ARE IN INCHES AND [ MM ] 5a RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 1 © TT electronics plc OVSA1xBLCR8 Series Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Continuous Forward Current 70 mA Peak Forward Current (Pulse width ≤10 msec, duty cycle ≤10%) 200 mA Power Dissipation 210 mW 1. Thermal Resistance Junction to Solder 150° C/W Electrostatic Discharge Classification (MIL-STD-883E) Class 2 LED Junction Temperature 110° C Lead Soldering Temperature 250° C / 10 seconds Note: 2 1. Rth test condition: Mounted on PC board FR 4 (pad size≥16 mm ) Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Luminous Intensi- I Red 2240 3700 mcd I = 50 mA V F ty V Forward Voltage Forward Voltage ---- 2.5 3.0 V I = 50 mA F F I Reverse Current Reverse Current ---- ---- 10 µA V = 5 V R R Dominant Wave- λ Red 618 624 630 nm I = 50 mA D F length 2Θ½H-H 50% Power Angle 50% Power Angle 60 deg I = 50 mA F General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 2 © TT electronics plc OVSA1xBLCR8 Series Standard Bins LEDs are sorted to luminous intensity (I ) and dominant wavelength (nm) bins listed below. Each reel consists of a single V intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (I ) @ 50mA Dominant Wavelength (nm) V RED: OVSA1SBLCR8 RED: OVSA1SBLCR8 IV Code Min (mcd) Max (mcd) nm Code Min Max Xb 2240 2800 RA 618 630 Ya 2800 3550 Yb 3550 4500 Z0 4500 5600 AMBER: OVSA1ABLCR8 AMBER: OVSA1ABLCR8 IV Code Min (mcd) Max (mcd) nm Code Min Max Yb 3550 4500 A2 584 587 Z0 4500 5600 A3 587 590 A0 5600 7100 A4 590 593 B0 7100 9000 A5 593 596 A6 596 599 Reflow Solder Profile Solder = Lead-Free Average ramp-up rate = 4°C / sec. max Peak temperature = 250°C max. Preheat temperature: 150 - 220°C Time within 5°C of actual peak temperature = 10 sec. max Preheat time: 120 sec. max. Ramp-down rate = 6°C / sec. max. Duration above 217°C is 60 sec. max General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 3 © TT electronics plc OVSA1xBLCR8 Series Typical Electro-Optical Characteristics Curves for OVSA1SBLCR8 (Red) & OVSA1ABLCR8 (Amber) Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Forward Current Red & Amber Maximum Forward DC Current Relative Luminous Intensity vs. Wavelength vs. Ambient Red & Amber Reverse Current vs. Re- Angular Distribution verse Voltage General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 4 © TT electronics plc OVSA1xBLCR8 Series Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded Quantity 700 pieces per reel Moisture Resistant Packaging: General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue B 11/2016 Page 5 © TT electronics plc