Full Color PLCC6 LED OVSTRGBB1CR8 • Full-color red/green/blue • PLCC package with 6 pins Product Photo Here • Wide viewing angle • High performance • Tuneable color mix The OVSTRGBB1CR8 package design provides wide viewing angle, low power consumption, and high luminous intensity. Color on demand is made possible by isolated chip circuits, allowing each LED to be driven individually or in tunable color combinations. Applications • Amusement equipment • Indoor and outdoor displays • Information boards • Backlighting • Automotive interior lighting • RGB full-color displays • Portable appliances Chip Part Number Lens Color Type Material Emitted Color Intensity Typ. mcd R AlInGaP Red 700 OVSTRGBB1CR8 Diffused G InGaN Green 1800 B InGaN Blue 400 5a RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 1 of 6 Full Color PLCC6 LED OVSTRGBB1CR8 Absolute Maximum Ratings o T = 25 C unless otherwise noted A RATING PARAMETER UNIT R G B Storage Temperature -40 ~ +100 °C Operating Temperature -40 ~ +100 °C Reverse Voltage 5 V Continuous Forward Current (1 chip on) 50 50 50 mA Peak Forward Current (10% Duty Cycle, PW ≤ 100 μsec, 1 chip on) 200 100 100 mA Power Dissipation 130 200 200 mW Junction Temperature 110 110 110 °C Junction/ambient (1 chip on) 450 400 450 °C/W Junction/ambient (3 chips on) 650 580 680 °C/W Junction/solder point (1 chip on) 300 280 300 °C/W Junction/solder point (3 chips on) 450 430 480 °C/W Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Moisture Sensitivity Level (IPC/JEDEC J-STD-020C) 5a / 24 Hrs Electrical Characteristics o T = 25 C unless otherwise noted A VALUES SYMBOL PARAMETER UNIT CONDITIONS R G B Min 560 1120 280 I Luminous Intensity mcd I = 50 mA V F Avg 700 1600 400 Avg 2.0 3.2 3.2 V Forward Voltage V I = 50 mA F F Max 2.6 4.0 4.0 I Reverse Current (max) 10 10 10 μA V = 5 V R R λ Dominant Wavelength 619-624 520-540 460-480 nm I = 50 mA D F λ Wavelength at Peak Emission 630 527 470 nm I = 50 mA P F 2 Θ½ Beam Angle 120 120 120 deg I = 50 mA F Δλ 24 38 28 nm I = 50 mA Spectral Radiation Bandwidth F OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Page 2 of 6 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBB1CR8 Standard Bins LEDs are sorted to luminous intensity (I ) and dominant wavelength (nm) bins shown. Each reel consists of a V single intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (I ) @ 50mA V RED GREEN BLUE Code Min (mcd) Max (mcd) Code Min (mcd) Max (mcd) Code Min (mcd) Max (mcd) K 560 710 P 1120 1400 G 280 355 M 710 900 Q 1400 1800 H 355 450 N 900 1120 R 1800 2240 J 450 560 Dominant Wavelength (nm) BLUE GREEN RED Code Min (nm) Max (nm) Code Min (nm) Max (nm) Code Min (nm) Max (nm) B3 460 465 G7 520 525 RB 619 624 B4 465 470 G8 525 530 B5 470 475 G9 530 535 B6 475 480 Ga 535 540 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 3 of 6 Full Color PLCC6 LED OVSTRGBB1CR8 Typical Electro-Optical Characteristics Curves Relative Intensity vs Dominant Wavelength Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Page 4 of 6 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBB1CR8 Typical Electro-Optical Characteristics Curves Maximum Forward DC Current vs Solder Point Temperature Maximum Forward DC Current vs Ambient Temperature Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 5 of 6 Full Color PLCC6 LED OVSTRGBB1CR8 Reel Dimensions: 7-inch reel Loaded Quantity—900 pcs per reel Carrier Tape Dimensions: Loaded quantity 900 pieces per reel Moisture Resistant Packaging Humidity Indicator Desiccant Label Aluminum Moisture-proof Bag Barcode Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 10/2010 Page 6 of 6 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com