POWER LPS25 Series Data Sheet 25 Watts Total Power: 25 - 40 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Universal input ƒ 3” x 5” footprint ƒ Less than 1U high ƒ Remote sense ƒ Built-in EMI filter ƒ Low output ripple Electrical Specifications ƒ Adjustable output Input ƒ Overvoltage protection ƒ Overload protection Input range 85 - 264 Vac; 120 - 300 Vac ƒ 110 KHz switching frequency Frequency 47 - 440 Hz ƒ LPX40 enclosure kit available Inrush current <15 A peak @ 115 Vac; <30 A peak @ 230 Vac, cold start @ 25 °C ƒ RoHS compliant Input current 1 A max. (RMS) @ 115 Vac ƒ Two year warranty Efficiency 70% typical at full load EMI filter FCC Class B conducted; CISPR 22 Class B conducted; EN55022 SAFETY Class B conducted ƒ TUV 60950 Safety ground <0.5 mA @ 50/60 Hz, 264 Vac input 11774-3336-1241 leakage current (LC#84936) Output ƒ cUL 60950 Maximum power 25 W for convection; 40 W with 30CFM forced air ƒ CSA CSA 22.2-234 Level 3 LR53982C Adjustment range -5, +10% minimum ƒ NEMKO EN 60950/EMKO-TUE Hold-up time 20 ms @ 25 W load, 115 Vac nominal line P95100442 (74-sec) 203 Overload protection Short circuit protection on all outputs ƒ CB Certificate and report Case overload protected @ 110-145% above peak rating 1577, 1578, 1579, 1580 Overvoltage protection 5 V output; 5.7 to 6.7 Vdc. ƒ CE Mark (LVD) Other outputs 10% to 25% above nominal output Remote sense Compensates for 0.5 V lead drop minimum Will operate without remote sense connected Reverse connection protected LPS25 Series Data Sheet Environmental Specifications Operating temperature 0° to 50°C ambient. Derate each output 2.5% per degree from 50° to 70°C, -20°C start up. Storage temperature -40°C to +85°C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating; non-condensing 5% to 95% RH Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz Vibration to 500 Hz, operational MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions Ordering Information Ripple Output Minimum Maximum Load with Maximum Load with 1 2 Model Number Peak Load Regulation 3 Voltage Load Convection Cooling 30CFM Forced Air P/P (PARD) LPS22 5V 0A 5A 8A 9A ±2% 50 mV LPS23 12V 0A 2.1A 3.3A 3.7A ±2% 120 mV LPS24 15V 0A 1.7A 2.7A 3A ±2% 150 mV LPS25 24V 0A 1.1A 1.8A 1.9A ±2% 240 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Power Derating Curve 40W 30 CFM Forced Air Cooling 30W Output Power 25W (Watts) 20W 20W Natural Convection 12.5W Cooling 10W 0W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C TA – Ambient Temperature – °C LPS25 Series Data Sheet Mechanical Drawing 5.00" (127) 0.22" 4.55" (5.6) (115.6) GND Remote Sense M1 M2 Connector SK201 _ + Voltage Adj. Pot 3.00" (76.2) SK 2 1 2 2.55" 3 (64.8) 4 SK 1 5 3 N 6 1 L 0.15" (4) DIA (4 places) 1.14" (29) 0.197" (5) Pin AssignmentsMating Connectors Connector LPS22 LPS23 LPS24 LPS25 Molex 09-50-8031 (USA) AC Input 09-93-0300 (UK) SK1-1 Line Line Line Line PINS: 08-52-0113 SK1-3 Neutral Neutral Neutral Neutral Molex 09-50-8061 (USA) DC Outputs SK2-1 +5 V +12 V +15V +24V 09-93-0600(UK) SK2-2 +5 V +12 V +15V +24V PINS: 08-52-0113 SK2-3 +5 V +12 V +15V +24V Molex 22-01-2025 Remote Sense PINS: 08-52-0123 SK2-4 Common Common Common Common Astec Connector Kit #70-841-006, includes all of the above SK2-5 Common Common Common Common SK2-6 Common Common Common Common 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm) SK201-1 +Sense +Sense +Sense +Sense 3. Mounting holes M1 and M2 should be grounded for EMI purposes. SK201-2 -Sense -Sense -Sense -Sense 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. Warranty: 2 year 7. Weight: 0.5lbs/0.23kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPS25 Series-DS 18Mar2016