Embedded Power for Business-Critical Continuity Rev. 03.31.11_135 AD2412N3L 1 of 2 AD2412N3L 24 Watts Total Power: 24 Watts Input Voltage: 90 - 264 Vac # of Outputs: Single Electrical Specifications Input Special Features Input ra nge: 90 - 264 Vac (wide range) Frequency: 47 - 63 Hz • Universal AC input Inrush current: 50 A maximum @ 230 Vac, cold start 25 °C • Fully regulated output Input current: 1 A maximum • EN61000-3-2 compliant Efficiency: 82% typical • Overcurrent and overvoltage EMI/RFI: FCC Part 15, Class B & EN55022 (CISPR 22) Class B protection • High efficiency Safety ground 250 µA maximum@ 50/60 Hz, 264 Vac input leakage current: • High MTBF • IEC320 AC input receptacle Output 3 pin (type C14) 24 W Maximum Power (Po): • Built in EMI filter 20 ms. minimum at full load @ 115 Vac, 60 Hz Hold-up time: • (CISPR 22 Class B) 28 V Overvoltage protection: • LED power good indicator Latching type, recycle AC to reset. • AC input fuse Overcurrent protection: Output short circuit protection auto recover • Efficiency Level V Overload protection @ 2.5 - 5A • CE Mark EMC, LVD & ErP 2011 Latching type, recycle AC to reset Thermal protection: • Meets K.21 Basic Surge requirement DC cable with 2.5 mm I.D./ 5.5 mm O.D. center plug Cable/connector : DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: -5° to +50 °C ambient Storage temperature: -45 °C to +85 °C Electromagnetic Designed to meet EN61000-4-2, -4, -5, level 3; susceptibility: EN61000-4-3, -6, 6v/m; EN61000-3-3 Safety and EN61000-3-2 Class A • UL UL 60950-1 Humidity: Operating; non-condensing 5% to 90% RH • CSA CSA-C22.2 no.60950 > 850,000 hours at full load and 25 °C ambient conditions, MTBF calculated: • TUV EN/IEC60950-1 Telcordia SR332 Issue 1 (Method 1, Case 3) • CE Mark LVD, EMC & ErP 2011 • CCC Certificate • CB Certificate Embedded Power for Business-Critical Continuity Rev. 03.31.11_135 AD2412N3L Americas 2 of 2 Ordering Information 5810 Van Allen Way Model Maximum Output Minimum Maximum Ripple 1 2 Carlsbad, CA 92008 Peak Load Regulation 3 Number Power Voltage Load Load P/P (PARD) USA AD2412N3L 24 W 12 Vdc 0.1 A 2 A 2.4 A ±5% < 120 mV Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 1. Peak current lasting 200ms every 3 seconds. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Europe (UK) 3. Peak-to-peak with 20MHz bandwidth and 10µF (tantalum capacitor) in parallel with a 0.1µF capacitor at rated line voltage and Waterfront Business Park load ranges. Merry Hill, Dudley 4. Power supply will opearate with no load West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Mechanical Drawing Asia (HK) 14/F, Lu Plaza 4.13" 47.25" (105) (1200 ) 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. AC INLET Emerson Network Power. The global leader in enabling MODEL LABEL business-critical continuity. AC Power Connectivity DC Power Embedded Computing Notes: Embedded Power 1. Specifications subject to change without notice. Monitoring 2. All dimensions in inches (mm), tolerance is ± 0.02” (±0.5mm) Outside Plant 3. Warranty: 2 year 4. Weight: 0.61 lb./ 0.28 kg Power Switching & Controls 5. AC input power cord sold separately 6. Specifications at factory settings at 115VAC input, Precision Cooling 25 °C unless otherwise stated Racks & Integrated Cabinets 7. AC Input Connector: IEC320, C13 Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co. 1.89" 1.30" (33) (48)