POWER CNS650-M Series Data Sheet 650 Watt AC-DC Power Supplies Total Power: 650 Watts Input Voltage: 90 - 264 V # of Outputs: Single SPECIAL FEATURES ƒ Designed for forced air and natural INDUSTRIAL convection cooling ƒ Medical and ITE safety approvals, 2x MOPP Electrical Specifications ® ƒ PMBus interface Input ƒ Active current share with OR-ing Input voltage ra nge 90 - 264 Vac; 127 - 350 Vdc FET ƒ Dual fused Frequency 47 - 63 Hz (360 - 440 Hz with higher leakage) ƒ Type BF ready Inrush current 50 Apk, cold start ƒ Active Power Factor Correction, Leakage current <300 µA 61000-3-2 compliant No load power < 500 mW ƒ Built-in Class B EMI filter Output ƒ Less than 1U high Maximum power 650 W, forced-air cooling (750 W peak) ƒ 4” x 6” U-channel construction 400 W, free-air natural convection cooling (650 W peak) (open-frame or end-fan variants available for 12 V) Adjustment range -0% / +15% ƒ <500 mW no-load power Holdup time 20 ms @ 400 W consumption Fan output 12 V @ 1.0 A (forced air) ® ƒ 80 PLUS certified (-ME model) 12 V @ 0.5 A (natural convection) ƒ Three-year warranty (consult Standby output 5 V @ 2.0 A (forced air) factory for extended terms) 5 V @ 1.0 A (natural convection) SAFETY ƒ UL/CSA ES60601-1/C22.2 No. 60601-1 UL 60950-1/C22.2 No. 60950-1 ƒ TÜV EN 60601-1 ƒ DEMKO EN 60950-1 ƒ CB IEC 60950-1 IEC 60601-1 IEC 62368-1 ƒ CCC GB4943.1/GB9254; GB17625.1 ƒ CE LVD, RoHS CNS650-M Series Data Sheet Electrical Specifications (continued) Control and Protection ® Serial bus interface PMBus Current share Active Remote sense 2-wire (+ and -) Pull inhibit low = main & fan output OFF (5 V standby is ON) Remote inhibit Pull inhibit high (or floating) = all outputs ON AC OK Active high when normal AC input is present (with internal 10k ohm pull up to 3.3 Vdc) DC OK Active high when main O/P is within regulation (with internal 10k ohm pull up to 3.3 Vdc) Smart fan control Monitor, control and override Overvoltage protection Latching / AC recyle or inhibit toggle required for PSU restart Overload protection Auto-recovery (Constant current mode down to 50% Vout) Overtemperature protection Auto-recovery with hysteresis Environmental Specifications Operating temperature -20 °C to +80 °C (derate at 50 °C), startup at -40 °C Storage temperature -40 °C to +85 °C Operating humidity 5% to 95% (non-condensing) Non-operating humidity 5% to 95% (non-condensing) Maximum altitude 5000 m (3000 m for medical), derating may apply Other Specifications Isolation 4000 Vac (input to output) 1500 Vac (input to PE; output to PE) Line harmonics 61000-3-2, Class A ESD immunity 61000-4-2; ±15kV (air)/±8kV (contact); Criterion A Conducted EMI Level B, CISPR 22 and FCC Part 15 Radiated EMI Level B, CISPR 22 and FCC Part 15 (with cover) Surge immunity 61000-4-5, Level 3 - Criterion A; Level 4 - Criterion C Medical EMC 60601-1-2, Edition 4 (cover maybe required for some tests) MTBF > 950 KHrs, 25 °C, 410 W natural convection (Telcordia, Issue 3, Method 1, Case 3) > 1.3 MHrs, 25 °C, 650 W forced air CNS650-M Series Data Sheet Ordering Information Vout Adjust Max. Continuous Max. Peak Max. Continuous Max. Peak Output Minimum 3 4 Model Number Range Load Load Load Load Regulation Ripple (p-p) Voltage Load 1 2 2 (-0% /+15%) (Free Air) (Free Air) (Forced Air) (Forced Air) 5, 6 CNS653-ME 12 V 12 - 13.8 V 0 A 54.2 A 62.5 A NA NA ±2% 120 mV 5 CNS653-MF 12 V 12 - 13.8 V 0 A 30.8 A 54.2 A 54.2 A 62.5 A ±2% 120 mV CNS653-MU 12 V 12 - 13.8 V 0 A 33.3 A 54.2 A 54.2 A 62.5 A ±2% 120 mV CNS655-MU 24 V 24 - 27.6 V 0 A 16.7 A 27.1 A 27.1 A 31.3 A ±2% 240 mV CNS658-MU 48 V 48 - 55.2 V 0 A 8.3 A 13.5 A 13.5 A 15.6 A ±2% 480 mV 1 Peak load current not to exceed 10 seconds, Ta = 50 °C. 2 Requires at least 400 LFM of airflow. 3 At 25 °C including factory setpoint, line voltage and load current variations. 4 Peak-to-peak ripple measured at the output terminal with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with 0.1 µF capacitor across the output. 5 Optional suffix “-ME” (end-fan) and “-MF: (open-frame) available on the 12 V output. 6 80 PLUS certified. Input Connections (-MU and -MF Suffix) Output Connections Pin Function Power Supply Side System Side Pin Function Power Supply Side System Side TB1 PE Molex 19099-0032 or BAR1 -Vout 19141-0063 for AWG #16 Dinkle EHK762V-03P Recommended Wire Output Terminal Screw: TB2 L2/Neutral BAR2 -Vout to #14 Max Torque: 4kgf-cm Size: AWG #22 to #14 M4X8 (4X) Molex 19099-0048 or TB3 L1/Line BAR3 +Vout Max Torque: 10kgf-cm 19141-0083 for AWG #12 BAR4 +Vout Input Connections (-ME Suffix) to #10 Pin Function Power Supply Side System Side IEC Input AC IEC 60320 C14 (Male) IEC Cord C13 (Female) Inlet Other Output and Control Connections (Connector J304) Pin Designation Description 1 5VSB +5 V Standby Output J304 20-Pin Connector (PSU Side): 2 5VSB +5 V Standby Output Landwin: 2052P20008T or 3 5VSB_GND +5 V Standby Output Return/Ground CviLux: CI0120P1HD0-LF 4 SCL Serial Clock Signal (I2C) 5 A0 EEPROM Address Recommended Mating Connectors: 6 SDA Serial Data Signal (I2C) CviLux: CI0120SD000 (housing) 7 I_SHARE Active current share pin CI01TD21PE0 (contact pins) 8 SYS_GND Return Ground for signals and I2C Landwin: 2050S2000 (housing) 9 12VFAN 12 V Fan Output 2053T021V (contact pins) 10 REMOTE INHIBIT Output Inhibit Pin (Main Output) JST: PHDR-20VS (housing) 11 FAN_RTN 12 V Fan Output Return/Ground SPHD-001T-P0.5 (contact pins) 12 VIN_GOOD Input Line OK Signal 13 FAN_PWM1 FAN PWM 14 PWOK Output Power OK Signal See ACCESSORIES Section 15 FAN_TACH1 Fan1 Tacho Signal 16 FAN_OVERRIDE External Fan Sensor for Override 17 FAN_FAIL Fain Fail Signal 18 FAN_FAULT_EN FAN Fault Enable Due to low RPM 19 REMOTE_SENSE+ Positive Remote Sense 20 REMOTE_SENSE- Remote Sense Return CNS650-M Series Data Sheet Fan Output Connector for -MU, -MF Suffix (Connector J306) Pin Function Description 1 12VFAN 12 V fan output J306 4-Pin Connector (PSU Side): 2 FAN_RTN 12 V fan return CviLux: CI0104P1HK0-LF 3 FAN_PWM1 Fan PWM Landwin: 2003P0401V 4 FAN_TACH1 Fan1 tacho signal Recommended Mating Connectors: CviLux: CI0104S0000 (housing) CviLux: CI01T01MPP0 (contact pins) Landwin: 2001S0400 (housing) Landwin: 2005T011R (contact pins) Mechanical Drawings (“-MU” Suffix for U-Base Construction/12 V, 24 V and 48 V) 16.2 120 PEM F-M3-1 (2X) 2.5 mm max penetration depth from face of side chassis PE C40 INPUT CONNECTOR N OUTPUT TERMINALS DINKLE EHK762V-03P L SCREW M4X8 (4X) TORQUE: 4kgf-cm MAX. TORQUE: 10kgf-cm MAX. L-0P J306 FAN J304 CONNECTOR 20-WAY SIGNAL CONNECTOR L1 D1 VR408 TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: PEM F-M3-1 (2X) INCREASE OUTPUT VOLTAGE MODEL LABEL 16.2 120 Thermal Hot Spot Reference Component Temperature Limit (-MU) D1 (AC bridge diode) 105 °C L1 (PFC choke) 115 °C C40 (output cap) 100 °C PEM F-M3-1 (4X) 3.0 MM MAX L-output (output choke) 125 °C PENETRATION Do not exceed indicated temperature limits to ensure operation is within the DEPTH FROM component thermal derating limits. Measure the component temperatures FACE OF BOTTOM using K type thermocouples. CHASSIS 26.2 100 (2X) Unit weight (-MU suffix): 800 g 152.4 0.5 1.9 REF 39.2 30 (2X) 75 (2X) 13.3 30 (2X) 101.6 0.5 39.2 0.5 CNS650-M Series Data Sheet Mechanical Drawings (“-MF” Suffix for Open-frame Construction/12 V only) 152.4 0.5 1.9 REF 4.5 141.9 43.9 1 RoHS LABEL PE C40 N OUTPUT TERMINALS INPUT CONNECTOR L SCREW M4X8 (4X) DINKLE EHK762V-03P TORQUE: 4kgf-cm MAX. TORQUE: 10kgf-cm MAX. L-0P J304 20-WAY SIGNAL CONNECTOR L1 D1 4.5 143.4 4X M3 VR408 MOUNTING TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: HOLE INCREASE OUTPUT VOLTAGE J306 FAN CONNECTOR MODEL LABEL Thermal Hot Spot Reference Component Temperature Limit (-MF) D1 (AC bridge diode) 120 °C L1 (PFC choke) 120°C C40 (output cap) 100 °C L-output (output choke) 125 °C Do not exceed indicated temperature limits to ensure operation is within the component thermal derating limits. Measure the component temperatures using K type thermocouples. Unit weight (-MF suffix): 650 g 88.8 0.5 REF 12.7 1 2.5 REF 4 88.3 34.1 0.5 96.8 0.5 CNS650-M Series Data Sheet Mechanical Drawings (“-ME” Suffix for End-fan Construction/12 V only) PEM F-M3-1 (2X) 120 16.2 177.8 0.5 4.8 REF AC INLET 152.4 OUTPUT TERMINALS SCREW M4X8 (4X) TORQUE: 10kgf-cm MAX. J304 20-WAY SIGNAL CONNECTOR VR408 20 120 16.2 1.9 REF TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: INCREASE OUTPUT VOLTAGE MODEL LABEL AIRFLOW DIRECTION (INTAKE) Unit weight (-ME suffix): 1000 g PEM F-M3-1 (2X) PEM F-M3-1 (4X) (2X) 100 26.2 55.8 (2X) 30 (2X) 30 (2X) 75 13.3 101.6 0.5 40 0.5 Level B CNS650-M Series Data Sheet Performance Curves Output Power Derating Output Power VS. Input Line 700 700 600 600 500 500 400 400 300 300 Convection (MF) Convection (MF) Convection (MU) 200 200 Convection (MU) 400 LFM (MF/MU) 400 LFM (MF/MU) 200 LFM (MF/MU) 100 200 LFM (MF/MU) 100 ME (End Fan) ME (End Fan) 0 0 90 110 130 150 170 190 210 230 250 270 0 10 20 30 40 50 60 70 80 90 Ambient Temperature [°C] AC Input Line [Vac] Figure 1. Output Power vs. Ambient Temperature at Natural Convection and Figure 2. Output Power vs. Input Line at Natural Convection and Forced Forced Air Cooling Air Cooling CNS655‐Mx (24V) Efficiency Curve CNS653‐Mx (12V) Efficiency Curve 96% 96% 95% 95% 94% 94% 93% 93% 92% 92% 91% 91% 115 VAC 115 VAC 90% 90% 230 VAC 230 VAC 89% 89% 0 0.2 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 1 Output Load (% of 650W) Output Load (% of 650W) Figure 3. Typical Efficiency for 12 V Output Figure 4. Typical Efficiency for 24 V Output CNS658‐Mx (48V) Efficiency Curve Estimated Service Life vs. Component Temp 96% 150 95% 125 94% Esimated Life 100 93% 75 92% 50 91% 25 115 VAC 90% 230 VAC 0 110 105 100 95 90 85 80 75 89% C40 Temperature [°C] 0 0.2 0.4 0.6 0.8 1 Output Load (% of 650W) Figure 5. Typical Efficiency for 48 V Output Figure 6. Estimated Product Useful Life Based on C40 Case Temperature CNS653-ME Fan Noise vs. Load 60 50 40 30 20 10 0 0 0.2 0.4 0.6 0.8 1 LOAD Figure 7. CNS653-ME (End Fan) typical audible noise level vs. Output Load at 90 VAC, ~30 °C Ambient. Efficiency (%) Output Power [Watts] SPL dB(A) Efficiency (%) Output Power [Watts] Efficiency (%) Lifetime [KHrs] CNS650-M Series Data Sheet Accessories Orderable Part Number Description Description PIN 20 PIN 19 J304 (20 Pin) Mating Connector with 73-788-001 PIN 3 0.3 m wires attached PIN 2 PIN 1 300 ± 5 mm Output Bussbar Extension Kit for Vertical CNS-BBAR-KIT Wire Interface 2 USB to I C Adaptor for PMBus 73-769-002 Communication WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street www.artesyn.com USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong +44 (0) 1384 842 211 +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, CNS650-M Series DS 06Dec2017 please visit www.artesyn.com/legal.