DA12-050AU-M - ARTESYN - Electronics Finder

Description

12 W, Single Output, 5 V@2 A Medical US Wallmount AC-DC Power Supply

Part Number

DA12-050AU-M

Price

Request Quote

Manufacturer

ARTESYN

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

Artesyn

Manufacturers Part #

DA12-050AU-M

Brand

Artesyn Embedded Technologies

Series

DA12

Factory Pack Quantity

Application

External Power Supply

Compliance

Level V

Cooling Method

Convection

Dimensions

2.36 x 1.99 x 1.78"

Efficiency

75%

Environmental Conditions

General Purpose

Industry

Medical

Input Type

Isolation

Class II

Mechanical Style

External

Number of Outputs

Operating Temperature

0 to +50°C, derate linearly to 50% power from 40 to 50°C

Output Amps 1

2 A

Output Voltage V1 Nominal

5 V

Package Type

US Wallmount

Power

12 W

Protection Level

2xMOPP

Subcategory

AC-DC Power Supply

Datasheet

da12-m_series_ds_06-04-14_79cfb80a76.pdf

1808 KiB

Download

Extracted Text

POWER DA12-M Series Data Sheet 12 Watts Total Power: 12 Watts Input Voltage: 90 - 264 Vac # of Outputs: Single Special FeatureS 5 V and 12 V versions Medical and ITE Safeties Switching wallmount power supply Available in interchangeable & fixed ac plug configurations CE Mark EMC, LVD & ErP 2011 Universal AC input Fully regulated output Overload and short circuit Electrical Specifications protection Input Thermal protection Input range: 90 - 264 Vac (wide range) Energy Star and CeC compliant Frequency: 47 - 63Hz Efficiency level V Constant voltage Inrush current: 28 A @ 264 Vac High MTBF Input current: 0.25 A rms @ 120 Vac; 0.15 A @ 240 Vac Built in EMI filter EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22 Class B) (CISPR 22) Class B Safety ground leakage current: 100 μA @ 50/60 Hz, 264 Vac input SaFety Output UL 60950, 60601-1 Voltage (Vo): 5.0 V and 12.0 V cUL 60950, 60601-1 Voltage regulation: ± 5% @ constant voltage mode TUV 60950-1, 60601-1 Maximum Power (Po): 12 W for 12 V models, 10 W for 5 V models AS/NZS 60950-1, 60601-1 Hold-up time: 10 ms. typical at full load @ 230 Vac CB Certificate and report Overvoltage protection: Non-latching type CE EMC, LVD & ErP 2011 for EU & UK versions Overload protection: Output shortcircuit protection auto recover PSE Denan Overload protected @ 150% above maximum rating CCC <2000M, No Tropical Overtemperature protection: Auto recovery Output cable/connector DC cable with 2.5 mm x 5.5mm barrel plug, 2.1 mm x 5.5 mm barrel polarity: available on DC multi-plug version. For others please contact factory. DC plug center +v DC plug outer -v DA12-M Series Data Sheet Environmental Specifications Operating temperature: 0 ° to +40 °C ambient Storage temperature: -40 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN55024 Humidity: Operating; non-condensing 5% to 95% RH 2 Vibration: Frequency/PSD: 5 - 350 Hz 0.0001 g /Hz 350 - 500 Hz - 6dB/Oct. 2 500 Hz 0.00005 g /Hz Acceleration: 0.21 gRMS Duration: 20 min per second AC Plug Configuration for Fixed Plug U.S. 2-prong US Europe 2-prong EU United Kingdom 3-prong UK Australia 2-prong AU AC Plug Configuration for Interchangeable Plug U.S. 2-prong DA-US Europe 2-prong DA-EU United Kingdom 3-prong DA-UK Australia 2-prong DA-AU C8 - 2 receptacle DA-C8 Japan 2-prong DA-JP China 2-prong DA-CH Korea 2-prong DA-KR DA12-M Series Data Sheet Mechanical Drawings DA12-XXXUS-M 59” (1500) 2.36” (60) (-) (+) CONNECTOR PIN-OUT DETAIL DA12-XXXAU-M 59” (1500) 2.36” (60) (-) (+) CONNECTOR PIN-OUT DETAIL 1.10” 1.78” (45,3) (28) 2.8” 1.10” 2.65” (71,4) (28 ± 0,3) (67,3) 0.67” 2.14” 1.99” 0.63” (17,1) (54,3) (16) (50,6) DA12-M Series Data Sheet Mechanical Drawings DA12-XXXEU-M 2.36” 59” (60) (1500) 0.685” (17,4) (-) (+) CONNECTOR PIN-OUT DETAIL DA12-XXXUK-M 59” (1500) 2.36” (60) (-) (+) CONNECTOR PIN-OUT DETAIL 1.10” 0.744” 1.98” 0.893” 1.90” (28) (18,9) (22,7) (48,3) (50.2) 3.22” (82) DA12-M Series Data Sheet Mechanical Drawings DA12-MP Interchangeable Plug Adapter 1.10” 59” 2.36” (28) (1500) (60) 1.58” (40.18) DA-US DA-UK DA-EU DA-AU *Can be inserted straight or 90˚ *Can be inserted straight or 90˚ DA-CH DA-JP DA-KR DA-C8 *Can be inserted straight or 90˚ *Can be inserted straight or 90˚ Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Weight: 0.25 lb/0.114 kg 4. Warranty: 2 years 2.06” (52.22) DA12-M Series Data Sheet Ordering Information - DA12 Adapter Ripple P/P 2 Model Number Maximum Power Output Voltage Minimum Load Maximum Load Regulation 3 (PARD) DA12-120US-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV DA12-120EU-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV DA12-120UK-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV DA12-120AU-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV DA12-120MP-M* 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV DA12-120MP-M2.1** 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV 4 DA12-050US-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV 4 DA12-050EU-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV 4 DA12-050UK-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV 4 DA12-050AU-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV 4 DA12-050MP-M* 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV 4 DA12-050MP-M2.1** 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV DA12-050MP-M402*** 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV * Interchangeable version - AC Plugs must be purchased separately to be used with DA12-120MP-M and DA12-050MP-M ** 2.1 mm x 5.5 mm barrel plug *** μ USB Connector Ordering Information - DA12 Interchangeable Plug Model Number DA-US DA-C8 DA-EU DA-JP DA-UK DA-CH DA-AU DA-KR DA-All (Includes DA-US, DA-EU, DA-UK, and DA-AU) 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 mHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. DA12-050XX model power supplies will operate with no-load, However under 0.1A Load Output ripple will exceed 50mV. WORLDWIDE OFFICES americas europe (uK) asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of For support: productsupport.ep@artesyn.com this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. DA12-M Series-DS 11.13.14 © 2014 Artesyn Embedded Technologies, Inc.

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products