POWER DCH3 Series Data Sheet 3 Watts DCH3-050UK DCH3-050US Total Power: 3 Watts Input Voltage: 100 - 254 Vac DCH3-050EU # of Outputs: Single SPECIAL FEATURES ƒ USB switching wallmount power supply ƒ Universal AC input ƒ Available in multiple AC plug configurations Electrical Specifications ƒ CE Mark EMC & LVD, & ErP 2011 for EU versions Input ƒ Regulated output Input range 100 - 240 Vac (wide range) ƒ Overload and short circuit protection Frequency 47 - 63 Hz ƒ Constant voltage, constant current EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & ƒ Efficiency Level VI EMC89/336/EEC ƒ Built in EMI filter (CISPR 22 Class B) Safety ground 10 μA @ 50/60 Hz, 230 Vac input ƒ Available in various output connectors leakage current ƒ Mini USB 2.0 dc output plug - 0005 Output ƒ Micro USB 2.0 dc output plug - 0006 Voltage (Vo) 5 V (4.75 - 5.25 V) Maximum power (Po) 3 W SAFETY Hold-up time 25 ms. typical at full load @ 115 Vac ƒ UL 60950/6500 Overvoltage protection Single fault 10.5 V max. latching type ƒ cUL 60950/6500 ƒ TUV 60950 Overload protection Output short circuit protection auto recover Overload protected > 800 mA ƒ NEMKO 60950 ƒ CB Certificate and report Output DC cable with Mini USB 2.0 -0005 suffix and Micro USB 2.0 -0006 ƒ CE EMC,LVD & ErP 2011 for Connector pinout Pin 1: +V EU & UK versions Pin 5: ground ƒ CTIA ƒ ENEC Environmental Specifications Operating temperature 0° to 45 °C ambient Storage temperature -20 °C to +70 °C Electromagnetic susceptibility Designed to meet EN55082-1 Humidity Operating; non-condensing 20% to 90% RH Vibration Per IEC 60068-2-6 DCH3 Series Data Sheet Ordering Information Maximum Output Minimum Ripple Model Number Maximum Load Connector 1 Power Voltage Load P/P (PARD) DCH3-050US-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050EU-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050UK-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050US-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050EU-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050UK-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 1. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be grounded for EMI purpose. Mechanical Drawing DCH3-050US - 0005 & 0006 LASER PRINTED LABEL 2.283" 59" (58) (1500) DCH3-050EU - 0005 & -0006 LASER PRINTED LABEL 2.283" 59" (58) (1500) 2.56" 2.44" (62) (65) .736" 1.075" .74" 1.06" (18.1) (27.3) (18.8) (27) 1.028" 1.028" (26.1) (26.1) DCH3 Series Data Sheet Mechanical Drawing DCH3-050UK - 0005 & - 0006 59" 2.275" (57.8) (1500) LASER PRINTED LABEL Pin Assignments PIN 5 (GROUND) PIN 1 (Vout) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Warranty: 2 years 4. Weight: 0.144 lb./0.066kg. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are For more information: www.artesyn.com/power trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos For support: productsupport.ep@artesyn.com referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. DCH3 Series-DS 01Jun2017 1.79" (45.5) .905" (23) 2.016" (51.2)