POWER DCH5 Series Data Sheet 5 Watts Total Power: 5 Watts Input Voltage: 100 - 240 Vac # of Outputs: Single SPECIAL FEATURES ƒ USB switching wallmount power supply DCH5-050US DCH5-050AU DCH5-050UK DCH5-050EU ƒ Universal AC input ƒ Available in various country AC plugs ƒ CE Mark EMC & LVD & ErP 2011 ƒ Regulated output Electrical Specifications ƒ Overload and short circuit protection Input ƒ Constant voltage, constant current Input range 100 - 240 Vac (wide range) ƒ Energy Star Efficiency Level V Frequency 47 - 63 Hz ƒ Eup compliant EMI/RFI ƒ Built in EMI filter (CISPR 22 Class B) FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC ƒ Cableless with - USB-A receptacle Safety ground 20 μA @ 60 Hz, 264 Vac input leakage current SAFETY Output ƒ UL + cUL 60950-1 Voltage (Vo) 5 V (4.75 - 5.25 V) ƒ TUV 60950-1 Maximum Power (Po) 5 W ƒ NEMKO 60950-1 ƒ NSW 60950-1 Hold-up time 10 ms. typical at full load @ 115 Vac/60 Hz ƒ C-Tick 60950-1 Overvoltage protection 7 V max. Latching type ƒ CE EMC & LVD & ErP 2011 for Overload protection Output short circuit protection auto recover EU & UK versions Overload protected 110 - 150% above maximum rating Output USB Type A receptacle Connector Pinout Pin 1: +V, Pin 2 and Pin 3 connected together Pin 4: Ground Environmental Specifications Operating temperature 0° to 40 °C ambient Storage temperature -20 °C to +70 °C Electromagnetic susceptibility Designed to meet EN55082-1 Humidity Operating; non-condensing 20% to 90% RH Vibration Per IEC 60068-2-6 DCH5 Series Data Sheet Ordering Information Maximum Output Minimum Ripple Model Number Maximum Load Connector 1 Power Voltage Load P/P (PARD) DCH5-050US 5 W 5 V 0 1 A 200 mV USB-A DCH5-050EU 5 W 5 V 0 1 A 200 mV USB-A DCH5-050UK 5 W 5 V 0 1 A 200 mV USB-A DCH5-050AU 5 W 5 V 0 1 A 200 mV USB-A 1. Peak-to-peak with 20 mHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be grounded for EMI purpose. Mechanical Drawing DCH5-050US 1.4” (35.55) DCH5-050EU 1.4” (35.55) 0.72” 1.88” (18.3) (47.87) 1.88” (47.87) 1.0” 1.0” (25.53) (25.53) DCH5 Series Data Sheet Mechanical Drawing DCH5-050UK 1.4” (35.55) 1.95” (49.53) DCH5-050AU 1.4” (35.55) 1.63” (41.3) 0.3” (7.75) 0.35” 1.88” 1.88” (47.87) (9) (47.87) 1.0” (25.53) 1.0” 1.74” (25.53) (44.2) DCH5 Series Data Sheet Pin Assignments 1 2 3 4 PIN 4 (GROUND) PIN 1 (Vout) Connected Together Pin Numbers Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Warranty: 2 years 4. Weight: 0.144 lb./0.066kg. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of For support: productsupport.ep@artesyn.com this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. DCH5 Series-DS 16Jul2015 © 2015 Artesyn Embedded Technologies, Inc.