POWER DPS50 Data Sheet 60 Watts Total Power: 30 - 60 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ CE Mark EMC & LVD (except DPS52) ƒ Universal AC input ƒ Fully regulated output ƒ Overload and short circuit protection Electrical Specifications ƒ Internal remote sense to the output Input plug Input range 90 - 264 Vac (wide range) ƒ Constant voltage 127 - 300 Vdc ƒ Level V efficiency (except DPS52) Frequency 47-440 Hz ƒ High MTBF Inrush current < 60 A @ 230 Vac, cold start @ 25 °C ƒ IEC320 AC receptacle, 3 pin (type C14) Input current < 2.0 A rms @ 115 Vac; < 1 A @ 230 Vac ƒ Built-in EMI filter (CISPR 22 Class B) Efficiency 88% typical ƒ LED power good indicator EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B ƒ Input power < 74 watts ƒ Complies with EN61000-3-2 Safety ground leakage current 0.5 mA @ 50/60 Hz, 264 Vac input ƒ Meets Energy Star Output Maximum Power (Po) 60 W (DPS52, 30 W) SAFETY Hold-up time 10 ms typical at full load @ 115 Vac ƒ UL UL 60950-1 Overvoltage protection 20% - 45% above nominal output maximum Latching type, recycle AC to reset. ƒ CSA CSA-C22.2 no.60950-1 ƒ VDE EN60950-1 Overcurrent protection Output short circuit protection auto recover Overload protected @ 120 - 150% above maximum rating ƒ CE EMC, LVD & ErP 2011 (except DPS52) Cable/connector DC cable with 2.5 mm center plug ƒ CB Certificate and report DC plug center +v ƒ PSE Denan 06-03051012 DC plug outer -v Environmental Specifications Operating temperature 0 °C to +40 °C ambient. -20 °C start up Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, level 3 Humidity Operating; non-condensing 5% to 90% RH Vibration Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to 500 Hz, operational MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions DPS50 Data Sheet Ordering Information Model Maximum Output Maximum Ripple 1 2 Peak Load Regulation 3 Number Power Voltage Load P/P (PARD) DPS52* 30 W 5 V 6 A 6.5 A ± 2% 50 mV DPS53 60 W 12 V 5 A 5.4 A ± 2% 120 mV DPS54 60 W 15 V 4 A 4.3 A ± 2% 150 mV DPS55 60 W 24 V 2.5 A 2.7 A ± 2% 240 mV DPS58 60 W 48 V 1.25 A 1.35 A ± 2% 480 mV 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. * No CE approval under new EUP directive Mechanical Drawing INDICATOR LED 5.24" (133.0) DC OUTPUTCABLE AC INLET 78.7" (2000±15) MODELLABEL Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) 3. Warranty: 2 year 4. Weight: 1.06 lb./.48 kg 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. DPS50-DS 23Oct2015 1.62" 2.39" (41.0) (60.7)