POWER DPS50-M 60 Watts Data Sheet Medical Total Power: 30 - 60 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Medical safety approvals ƒ CE Mark EMC & LVD (except DPS52-M) ƒ Universal AC input ƒ Fully regulated output Electrical Specifications ƒ Overload and short circuit protection Input ƒ Internal remote sense to the output Input range 90 - 264 Vac (wide range) plug 127 - 300 Vdc ƒ Constant voltage Frequency 47 - 440 Hz ƒ Level V efficiency (except DPS52-M) Inrush current <60 A @ 230 Vac, cold start @ 25 °C ƒ High MTBF Input current <2.0 A rms @ 115 Vac; <1 A @ 230 Vac ƒ IEC320 AC receptacle, 3 pin (type C14) Efficiency 88% typical ƒ Built-in EMI filter (CISPR 22 Class B) ƒ LED power good indicator EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B ƒ Input power <74 watts Safety ground leakage current 275 μA max. @ 50/60 Hz, 264 Vac input ƒ Complies with EN61000-3-2 Output ƒ Meets Energy Star Maximum Power (Po) 60 W (DPS52, 30 W) Hold-up time 10 ms typical at full load @ 115 Vac SAFETY Overvoltage protection 20% - 45% above nominal output maximum ƒ UL UL 60601-1 Latching type, recycle AC to reset. ƒ CSA CSA-C22.2 no.601.1-M90 Overload protection Output short circuit protection auto recover ƒ VDE 07501/EN60601-1 (IEC601) Overload protected @ 120 - 150% above maximum rating ƒ CE EMC & LVD (except DPS52-M) Cable/connector DC cable with 2.5 mm center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: 0 °C to +40 °C ambient. -20 °C start up Storage temperature: -40 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, level 3 Humidity: Operating; non-condensing 10% to 90% RH Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to 500 Hz, operational MTBF demonstrated: > 550,000 hours at full load and 25 °C ambient conditions DPS50-M Data Sheet Ordering Information Model Maximum Output Maximum Ripple 1 2 Peak Load Regulation 3 Number Power Voltage Load P/P (PARD) DPS52-M* 30 W 5 V 6 A 6.5 A ± 2% 50 mV DPS53-M 60 W 12 V 5 A 5.4 A ± 2% 120 mV DPS54-M 60 W 15 V 4 A 4.3 A ± 2% 150 mV DPS55-M 60 W 24 V 2.5 A 2.7 A ± 2% 240 mV DPS58-M 60 W 48 V 1.25 A 1.35 A ± 2% 480 mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. * No CE approval under new EUP directive Mechanical Drawing INDICATOR LE D 5.24" (133.0) DC OUTPUT CABLE AC INLET 78.7" (2000±15) MODEL LABEL Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (±0.5 mm) 3. Warranty: 2 year 4. Weight: 1.06 lb./.48 kg 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. DPS50-M-DS 23Oct2015 1.62" 2.39" (41.0) (60.7)