Embedded Power for Business-Critical Continuity Rev. 02.17.11_18 DS1200DC 1 of 4 DS1200DC 1200 Watts Distributed Power System Distributed Power Bulk Front-End Total Output Power: 1200 Watts 3.3 or 5.0 Vdc Stand-by Output Telco Input Range: -40 to -72 Vdc Electrical Specifications Input Special Features Input ra nge: -40 Vdc to -72 Vdc • GR-1089-CORE Issue 4 compliant Inrush current: ETSI EN300 132-2 part 4.7 compliant • 1U X 2U form factor Efficiency: > 85% typical at high line 50% load 3 • 21.71 W / in Conducted EMI: Per GR-1089-CORE Issue 4 • +12 Vdc Output Radiated EMI: Per GR-1089-CORE Issue 4 • +3.3 Vdc stand-by (5 V standby - option) Leakage current: 1.40 mA @ 240 VAC • No minimum load required Hold up time: 12 ms minimum • Hot plug operation Output • N + 1 redundant • Internal OR’ing fets Main DC voltage: +12 V @ 100 A • Active current sharing Stand-By: +3.3 Vsb @ 6 A (5 V @ 4 A available) shares with DS1200 AC unit 2 Adjustment range: ±5% on +12V only using I C (10 - 100% load) Regulation: +12 Vdc; ± 5% • Built-in cooling fan 3.3 or 5.0 Vsb ± 5% (40 mm x 28 mm) 2 Over current: +12 Vdc; latches off if overcurrent lasts over 1 second, • I C communication interface bus otherwise it is auto recovery (See Table 1 next page) +3.3 Vsb, 9 A • PMBus compliant max (hiccup mode) • EERPOM for FRU data Over voltage: +12 Vdc; 13.2 - 14.4 Vdc • Red/green bi-color LED status +3.3 Vsb; 3.76 - 4.30 Vdc • Internal fan speed control Under voltage: +12 Vdc; 9 - 10.8 V (latch off) • Fan Fail Tach Output Signal • INTEL, SSI Std. logic timing Turn-on delay: 2 second max, 5 - 50 mS, monotonic rise • INTEL, SSI Std. FRU data format Main output rise time: 5 - 50 mS, monotonic rise • Full digital control • Two year warranty • NEBS compliant Safety • UL/cUL 60950 (UL Recognized) • NEMKO+ CB Report EN60950 • EN60950 • CE Mark • China CCC Embedded Power for Business-Critical Continuity Rev. 02.17.11_18 Logic Control DS1200DC 2 of 4 PS_SEATED (A4): TTL logic LOW if power supply is seated into system connector. This is a short pin. A logic HIGH if the PSU is removed PWR GOOD (C3): Active TTL high when output is within regulation limits. AC OK (B1): A low logic level if the input voltage is within allowable limits. A TTL logic HIGH level, and a 5mS early warning signal before 12.0 V DC output loss of regulation. PS_INHIBIT/PS_KILL (B4): When left open power supply operation will be inhibited. When the power supply is inserted into the system, this pin will be pull low by the system and turn the power supply on only after all other power supply pins have seated. PS ON (A1): The output will be enabled when this signal is pulled low, below 0.8 V outputs disabled when pin is driven high or left open. Environmental Specifications Operating temperature: -10° to 55 °C Storage temperature: -40 °C to +85 °C Altitude, operating: 13,000 ft Electromagnetic susceptibility / Input transients: GR-1089-CORE Issue 4 RoHS & lead-free Compliant Humidity: 20 to 90% RH, non-condensing Shock and vibration specificatons: Complies with Astec Std. Specifications, Q3205 + additional NEBS requirement MTBF (Demonstrated): 500K Hrs at full load, 40 °C Ordering Information Nominal Output Set Point Total Minimum Maximum Output Ripple Model Number Over Current Stand-by Air Flow Voltage Set Point Tolerance Regulation Current Current P/P DS1200DC-3 12.0 Vdc ±0.2% ±5% 0 A 100 A 120 mV 118 A - 147.6 A* 3.3 V @ 6 A STD † DS1200DC-3-001 12.0 Vdc ±0.2% ±5% 0 A 100 A 120 mV 118 A - 147.6 A* 3.3 V @ 6 A REV DS1200DC-3-002 12.0 Vdc ±0.2% ±5% 0 A 100 A 120 mV 118 A - 147.6 A* 5.0 V @ 4 A STD † DS1200DC-3-004** 12.0 Vdc ±0.2% ±5% 0 A 100 A 120 mV 118 A - 147.6 A* 5.0 V @ 4 A REV *Over current latches off if overcurrent lasts over 1 seconds, otherwise it is auto recovery. **Release in April 2010 † Derating may apply. Embedded Power for Business-Critical Continuity Rev. 02.17.11_18 DS1200DC Mechanical Drawing 3 of 4 Condition LED Status Stand-by - ON; Main output - OFF; AC PRESENT Blinking green Stand-by - ON; Main output - ON; Solid green Main output OCP, UVP, OVP Blinking Amber FAN_FAULT; OTP; Stand-by OCP/UVP Amber FORWARD AIRFLOW DIRECTION MODEL LABEL (LABEL TEXT & CHARACTERS AS ORIENTED) 275.5 279.4 ± 1 7.02 ± 0.8 9 68.8 6 39.9 ± 0.5 81.3 ± 0.8 Embedded Power for Business-Critical Continuity Rev. 02.17.11_18 DS1200DC Americas DC Output Connector Pinout Assignment 4 of 4 5810 Van Allen Way Male connector as viewed from the rear of the supply: Carlsbad, CA 92008 USA D1 D2 D3 D4 D5 D6 Telephone: +1 760 930 4600 C1 C2 C3 C4 C5 C6 PB1 PB2 PB3 PB4 PB5 PB6 Facsimile: +1 760 930 0698 B1 B2 B3 B4 B5 B6 A1 A2 A3 A4 A5 A6 Europe (UK) Waterfront Business Park P1 - Power Supply Side Pin Assignments Merry Hill, Dudley 1. FCI Power Blade 51721 series West Midlands, DY5 1LX Pin Signal Name 51721-10002406AA United Kingdom PB 1 Main output return 2. Molex Power Connector Telephone: +44 (0) 1384 842 211 PB 2 Main output return SD-87667 series Facsimile: +44 (0) 1384 843 355 PB 3 Main output return 87667-7002 PB 4 + Main output Asia (HK) PB 5 + Main output Mating Connector (System Side) 14/F, Lu Plaza PB 6 + Main output 1. FCI Power Blade 2 Wing Yip Street A1 PS_ON 51741-10002406CC Kwun Tong, Kowloon A2 Main output remote sense return Straight Pins Hong Kong A3 Spare Telephone: +852 2176 3333 2. FCI Power Blade A4 PS_SEATED (Power Supply Seated) Facsimile: +852 2176 3888 51761-10002406AALF A5 STAND-BY Right Angle A6 STAND-BY RETURN For global contact, visit: B1 AC_OK (AC Input Present) www.Emerson.com/EmbeddedPower B2 Main output remote sense B3 Main output current share techsupport.embeddedpower B4 PS_INHIBIT / PS_Kill @emerson.com B5 STAND-BY While every precaution has been taken to ensure B6 STAND-BY RETURN accuracy and completeness in this literature, Emerson 2 C1 SDA (IC Data Signal) Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this 2 C2 SCL (IC Clock Signal) information or for any errors or omissions. C3 POWER GOOD C4 Spare Emerson Network Power. C5 STAND-BY The global leader in enabling C6 STAND-BY RETURN business-critical continuity. 2 D1 A0 (IC Address BIT 0 Signal) 2 D2 A1 (IC Address BIT 1 Signal) AC Power D3 S_INT (Alarm) Connectivity D4 STAND-BY RMT SENSE D5 STAND-BY DC Power D6 STAND-BY RETURN Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.