Electronics Finder

Description

450 W, Single Output, 12 VDC@37 A AC-DC Power Supply

Part Number

DS450HE-3

Price

Request Quote

Manufacturer

ARTESYN

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

Artesyn

Manufacturers Part #

DS450HE-3

Brand

Artesyn Embedded Technologies

Series

DS450HE-3

Factory Pack Quantity

Cooling Method

Air-Cooled

Dimensions

13.29 x 3.07 x 1.58"

Efficiency

89%

Mechanical Style

PFC Front End

Mounting

Rack

Number of Outputs

Operating Temperature

- 10 to + 50°C

Output Amps 1

37 A

Output Voltage V1 Nominal

12 VDC

Power

450 W

Subcategory

AC-DC Power Supply

Datasheet

ds450-ds550_ds_1199934183.pdf

666 KiB

Download

Extracted Text

POWER Data Sheet DS450-3/DS550-3 Distributed Power Bulk Front-End Total Output Power: 450 - 550 Watts +12 Vdc Main Output +3.3 Vdc Standby Output Wide Range Input Voltage: 90 - 264 Vac SPECIAL FEATURES Active power factor correction EN61000-3-2 harmonic compliance Inrush control 1U X 2U form factor 3 3 10.3 W/in (DS550) 8.4 W/in (DS450) +12 Vdc output +3.3 Vdc standby Electrical Specifications No minimum load required Input Hot plug operation Input ra nge 90 - 264 Vac (wide range) N + 1 redundant Frequency 47 - 63 Hz, single phase AC Internal OR’ing fets Inrush current 15 A maximum Active current sharing Built-in cooling fans (40 mm x 28 mm) Efficiency > 84% typical at full load, high line 2 I C communication interface bus Conducted EMI FCC Subpart J EN55022 Class A EEPROM for FRU data Radiated EMI FCC Subpart J EN55022 Class A Amber LED status, fan_fail Power factor 0.99 typical Green LED status, Leakage current 1.30 mA @ 240 Vac power good/AC_OK status Hold up time 20 ms minimum Internal fan speed control Output Fan fail tach output signal One year warranty Main DC voltage +12 V Standby +3.3 Vsb Adjustment range Factory set, no pot adjustments SAFETY Regulation +12 Vdc; +5%/-3% UL/cUL 60950 (UL recognized) +3.3 Vsb; +5%/-4% NEMKO+ CB report EN60950 Overcurrent See Table 1 next page EN60950 Overvoltage +12 Vdc; 13.5 - 15 Vdc CE mark +3.3 Vsb; 3.76 - 4.30 Vdc China CCC Undervoltage +12 Vdc; 11.0 - 11.5 Vdc +3.3 Vsb; 2.77 - 3.00 Vdc Turn-on delay 1 second max +12 V output rise time 2 - 20 mS, monotonic DS450-3/DS550-3 Data Sheet Logic Control PS Inhibit When supply is inserted into the system the pin is pulled LOW and power supply is ON after all other pins are seated 2 PS_Status I C port P6. When the power supply is on and running normal P6 is low. When the power supply is off, either due to -PS_ON, PS_KILL, or a fault, then P6 is high. 2 AC_Pfail I C port P7. P7 is high except when the power supply turns the main outputs, not +3.3 Vsb, off due to an AC failure (AC missing or too low for power supply operation). If the supply is turned off due to -PS_ON, PS_KILL, or a fault, then P7 remains high. Fan_Fault The PSU will provides an open collector Tach 1 output. Tach_1 This signal is generated from the fan. The signal should generate 2 pulses per revolution. The logic in the system will be operating at 3.3 V. Environmental Specifications Operating temperature -10 °C to 50 °C Storage temperature -40 °C to +70 °C Altitude, operating 10,000 ft. Electromagnetic susceptibility/Input transients -EN61000-3-2, -3-3 -EN61000-4-2, 4.3, 4-4, -4-5, 4-11 -EN55024:1998 RoHS & lead-free compliant (no tantalum caps) Humidity 20 to 90% RH, non-condensing Shock and vibration specificatons complies with Artesyn Embedded Technologies Std. Specification. MTBF (Demonstrated) 400 K Hrs at full load, 40 °C Ordering Information Nominal Output Set Point Total Minimum Maximum Output Ripple Output Overcurrent Options Voltage Set Point Tolerance Regulation Current Current P/P 12.0 Vdc ± 0.2% +5/-3% 0 A 37.0 A 120 mV 39.5 A - 44.4 A DS450-3 Standard 3.3 Vsb ± 1% +5/-4% 0 A 3.0 A 60 mV 4.9 A Avg, 7 A max 12.0 Vdc ± 0.2% +5/-3% 0 A 37.0 A 120 mV 39.5 A - 44.4 A DS450-3-002 Reverse Air 3.3 Vsb ± 1% +5/-4% 0 A 3.0 A 60 mV 4.9 A Avg, 7 A max 12.0 Vdc ± 0.2% +5/-3% 0 A 45.0 A 120 mV 48.0 A - 54.0 A DS550-3 Standard 3.3 Vsb ± 1% +5/-4% 0 A 3.0 A 60 mV 4.9 A Avg, 7 A max *Overcurrent latches off if overcurrent lasts over 1 second, otherwise it is auto recovery. *For 5 Vsb, please contact marketing department. DS450-3/DS550-3 Data Sheet Mechanical Drawings 10.02" (254.7) 13.29" (337.6) (2X) F 1.52" 1.453" (38.4) (36.9) J G 12.03"±0.3" (305.6 ±0.8) 10.88" (276.4) (3X) 10.02" F E (254.7) D 3.07" (78.0) K 11.925" ±0.3" (302.9 ±0.8) 2.84" (72.2) .228 ±.02 .197" ±.02" 10.02" A F (5.8 ±0.5) (5.0 ±0.5) (254.6) 'POWER GOOD' GREEN .3976" ±.028" 'FAULT' YELLOW B (10.1 ±0.5) 1.575" ±0.3" 1.51" ±.03" 'AC GOOD' GREEN (40.0 ±0.8) (38.4 ±0.8) .1496" ±.02" .972" ±0.2" .138" ±.020" 2.913" ±.024") H 41.5 LATCH SPRING C (3.8 ±0.5) 24.7 ±0.5 (3.5 ±0.5) (74.0 ±0.6) DISTANCE (REF.) 3.071" ±.03" (78.0 ±0.8) (3X) 254.6 F 3.0 ±0.3 STD AIRFLOW DS450-3/DS550-3 Data Sheet DC Output Connector Pinout Assignment Male connector as viewed from the rear of the supply: D1 D2 D3 D4 D5 D6 C1 C2 C3 C4 C5 C6 PB1 PB2 PB3 PB4 PB5 PB6 B1 B2 B3 B4 B5 B6 A1 A2 A3 A4 A5 A6 P1 - Power Supply Side Mating Connector (System Side) 1 FCI Power Blade 51721 series 1 FCI Power Blade 51721-10002406AA 51741-10002406CC Strait Pins 2 Molex Power Connector 2 FCI Power Blade SD-87667 series 51761-10002406AA 87667-7002 Right Angle Pin Assignments Pin Assignments Pin Signal Name Pin Signal Name PB 1 +12 V Return C1 Logic Return PB 2 +12 V Return C2 Tach_1 (Fan Fail Signal) PB 3 +12 V Return C3 Logic Return PB 4 +12 V C4 +3.3 V Stand-By 2 PB 5 +12 V C5 SCL (I C Clock Signal)* PB 6 +12 V C6 VIN_GOOD (AC Input present) A1 PS_KILL D1 -PS_Present (Power Supply Seated) A2 +12 V_Current Share D2 Spare A3 Logic Return D3 Logic Return A4 +3.3 V Stand-By D4 +3.3 V Stand-By 2 A5 A0 (I C Address BIT 0 Signal) D5 S_INT (Alert) A6 +3.3V Stand-By D6 POK (Output Power Ok) B1 Logic Return 2 *Supports I C standard mode (100 kHz) only B2 Spare B3 Logic Return B4 +3.3 V Stand-By 2 B5 SDA (I C Data Signal) B6 PSON (Power Enable Signal) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. DS450-3/DS550-3-DS 11Dec2015

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products