POWER LCC600 Data Sheet 600 Watts Conduction Cooling Total Power: 600 W # of Outputs: Single Outputs: 12, 28, 36, 48 Vdc SPECIAL FEATURES ƒ 600 W full power at elevated temperatures ƒ Wide operating temperature range (-40 °C to 85 °C baseplate) ƒ Adjustable output ƒ Remote output On/Off ƒ AC_OK; DC_OK signals ƒ 5 V standby voltage ƒ Active current share Electrical Specifications ƒ Conduction-cooled/fanless Input 2 ƒ I C / PMBus Input ra nge U Suffix: 90 - 264 Vac (Safety rating:100 - 240 Vac) 3 4 ƒ Medical and ITE Safety 127 - 374 Vdc H Suffix: 180 - 305 Vac (Safety rating: 200 - 277 Vac) ƒ Suited for BF-type applications 4 254 - 420 Vdc ƒ Active power factor correction Frequency 47 - 63 / 440 Hz (Safety rating: 50/60 Hz) ƒ Optional IP65 variant Input fusing Internal fuse on both L and N lines (12.5 A - U suffix; 7 A - H suffix) ƒ Optional 277 Vac input variant EMI/RFI FCC Class B, CISPR22/EN55022 Class B 1 1 MIL-STD-461F EMI Compliance to CE101, 102; CS101, 114, 115, 116 (with external filter ) COMPLIANCE Inrush current ≤ 25 A peak ƒ EMI Class B Power factor 0.99 typical ƒ EN61000 Immunity 2 Harmonics Meets EN61000-3-2 Class A and Class C Input current < 10 Arms @ 100 Vac SAFETY nd Hold up time 20 ms min for Main Output (230 Vac) @ 100% Load ƒ UL + CSA: 60950-1 2 Ed. 3 ANSI ES60601-1 Efficiency 93.3% typical @ 230 Vac; 100% Load; 28 Vdc 5 UL 8750 U Suffix: 115 µA typical (< 200 µA max per ANSI/ES60601-1 264 Vac 3 5 Leakage current CSA-C22.2 No. 250.13 split-phase / 60 Hz) nd ƒ TÜV: 60950-1 2 Ed. 387 µA typical (< 500 µA max per IEC60601-1; 264 Vac / 50Hz) rd 3 H Suffix: 0.2 mA typical (< 3.5 mA max per ITE 60950-1 Standard) 60601-1 3 Ed. 5 EN 61347-1; -2-13 Isolation voltage U Suffix H Suffix PRI-SEC: 4,000 Vac (2X MOPP) 3,000 Vac ƒ CB Scheme: IEC 60950-1 PRI-Chassis: 1,500 Vac (1X MOPP) 2,000 Vac IEC 60601-1 SEC-Chassis: 1,500 Vac (1X MOPP) 1,500 Vac 5 IEC 61347-1; -2-13 1 Artesyn Filter PN: 700-014447-0000 (Zhongguang PN: ZGLPG-10-02M). ƒ China CCC 2 Meets Class C ≥ 50% load. 3 ƒ CE Mark U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only. 4 DC input rating not part of product’s Safety approval. 5 LED Lighting approvals apply to all 48 V output variants. LCC600 Data Sheet Electrical Specifications Output Output rating See Ordering Information table Standby output 5.0 Vdc @ 1.5 A Max Set point ± 0.5% Factory set point Total regulation Main Output: ± 2.0% Combined Line / Load / Temperature 5 Vsb: ± 5% Rated load 600 W maximum 600 W from -40 °C to 85 °C Baseplate Temp. Derate output to 28 W @ 95 °C Baseplate Temp Minimum load 0 A For both Main and 5 Vsb Outputs Output voltage adjust range See Ordering Information table Max power limited to 600 W Output noise Main Output: 1.0% max p-p Measured with 0.1 μF Ceramic and 10 μF Tantalum Cap, 5 Vsb: 60 mV max p-p 20 MHz BW Remote sense Compensation up to 500 mV Pin 10: +Vout_RS / Pin4: -Vout_RS Overcurrent protection 105 - 130% of full load current Default is Shutdown mode with Auto-retry every 2~4 sec. Output latches after 20 sec of continuous OCP fault presence. Restart after latch possible through AC recycle, Inhibit toggle or through PMBus. Overvoltage protection 125 - 145% Vo, nom Main Output Latching / AC Recyle or Inhibit toggle required for PSU 125 - 130% 5 Vsb restart Overtemperature protection > 95 °C Baseplate temperature Output Shutdown / Auto-recovery AC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when AC is present DC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when Main Output is within regulation Remote inhibit Contact Closure Pin 19: Open/Float = ON; Close/Ground = OFF # Units in parallel operation Qualified up to 5 units in parallel. Consult factory if Pin 5: IShare pin for main output only. more than 5 are required. Output dimming 0-10 Vdc external voltage; Consult with productsupport.ep@artesyn.com 0-100 kOhm external resistance Environmental Specifications Operating temperature range -40 °C to +85 °C Baseplate temperature Storage temperature -40 °C to +85 °C Humidity 10% to 95% Altitude 16,402 ft (Operating) / 50,000 ft (Non-Operating) Shock MIL-STD-810F 516.5 Procedure I, VI Vibration MIL-STD-810F 514.5 Cat. 4, 10 Ingress protection IP65 (for suffix “-4P”) MTBF (calculated) >2M Hrs, 25 °C per SR-332 Issue 3 Electromagnetic immunity Designed to meet EN61000-4-3, -4, -5, -8, -11 (Level 3); EN61000-4-2 (Level 4); EN60601-1-2 and EN55024 For H suffix, Level 4 for EN61000-4-5 LCC600 Data Sheet Ordering Information Output Current [A] Max O/P Combined Output Setpoint Typical Output Model Number* AC Input Standby Output Line/Load Setpoint Tolerance Efficiency** Ripple Min Max Power [W] Regulation (1) LCC600-48U-4PD 90 - 264 54 V ±0.5% 0 11.1 600 93.0% 5 Vdc @ 1.5 A 2% 1% LCC600-48U-9P 90 - 264 48 V ±0.5% 0 12.5 600 93.0% 5 Vdc @ 1.5 A 2% 1% LCC600-48H-9P 180 - 305 LCC600-36U-9P 90 - 264 36 V ±0.5% 0 16.7 600 92.0% 5 Vdc @ 1.5 A 2% 1% LCC600-36H-9P 180 - 305 LCC600-28U-9P24 90 - 264 24 V ±0.5% 0 25 600 93.0% 5 Vdc @ 1.5 A 2% 1% LCC600-28U-9P 90 - 264 28 V ±0.5% 0 25*** 600 93.5% 5 Vdc @ 1.5 A 2% 1% LCC600-28H-9P 180 - 305 LCC600-12U-9P 90 - 264 12 V ±0.5% 0 50 600 92.3% 5 Vdc @ 1.5 A 2% 1% LCC600-12H-9P 180 - 305 *Change suffix “-9P” to “-4P” for IP65 rated enclosure with fly lead wires *Change suffix “-4P” to “-4PR” for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 Vdc) *Change suffix “-4P” to “-4PV” to omit the control cable (applies to 28, 36, 48 Vdc) * Add suffix “CC” for Constant Current setting (e.g. “-4PCC”; “-9PCC”). **Typical efficiency at high line, factory default voltage and full load ***When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max). (1) “D” suffix for 0-10 Vdc analog external volatge dimming (11.1 A CC limit). Consult Technical Reference Notes for additional details. Mechanical Drawings 228 0.50 -9P Suffix SIGNAL PIN LOCATIONS 4-POSITION TERMINAL BLOCK M4x8 SCREW, 10mm PITCH WITH PLASTIC COVER 3-POSITION LOCKING CONNECTOR PIN 2 PIN 1 (SEE NOTE 7) (TYCO P/N: 1-350943-0 OR EQUIVALENT) MATE WITH TYCO P/N: 350766-1 (HOUSING) & 350536-1 (CONTACT TERMINAL) TRIMPOT WINDOW MODEL LABEL PIN 20 PIN 19 HEADER CONNECTOR (J1501) MATE WITH P/N: JST PN PHDR-20VS (HOUSING) & JST PN SPHD-001T-P0.5 (CONTAC PINS) (SEE PIN LOCATION DETAILS) 228 0.50 85.0 0.50 (2.2) (35.50) 0.20 101 0.50 73.34 73.34 40.66 Notes: 1) Recommended mounting screw is M4 in 6 locations; 8-10 kgf-cm torque. 2) Baseplate material/finish: 5 mm Aluminum with Black Anodized. 3) Weight: 9P Suffix: 1.63 kg typical 4P Suffix: 1.81 kg typical 4) Thermal hotspot reference is in the middle of the baseplate. CUSTOMER MOUNTING HOLE FIT WITH M4 SCREW (6 PL) (29.7) 93.00 +0.7 39.8 -0.3 LCC600 Data Sheet Mechanical Drawings 300 228 0.5 300 10 -4P Suffix (28, 36, 48 Vdc) 10 UL2517 14AWGX4C SJTW 18AWGX3C (30) (30) UL2517 26AWGX20C+AL 290 10 MODEL LABEL TRIMPOT LOCATION 228 0.5 84.41 0.5 85 0.5 0.2 (50.5) CUSTOMER MOUNTING HOLE 4.6 101 0.5 FIT WITH M4 SCREW (6 PL) CUT EXPOSED LEADS OF SIGNAL WIRES (2-73.3) (2-146.7) (2-40.7) -4P Suffix (12 Vdc) 300 10 228 0.5 3X- 307 10 59 0.5 HEIGHT MEASUREMENT UL2517 REFERENCE POINT 26AWGX20C SEE NOTE 9 TIN DIP TIN DIP ARTESYN P/N: 750-006769-000X ARTESYN P/N: THW OR MTW (INPUT CABLE ASSY) 750-007030-00XX AWG 6 WIRE (OUTPUT CABLE ASSY) RATING AND SAFETY LOGO LABEL TRIMPOT LOCATION 85 0.50 (50.5) 0.2 101 0.50 CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW (SEE NOTE 8) (6 PL) (2X-73.3) (2X-146.7) (2X-40.7) (22) (21.4) 8.5 46 0.5 (5) (3-93.0) (3X-93) (24) +0.7 39.8 -0.3 40.50max LCC600 Data Sheet Mechanical Drawings -4PR Suffix (28, 36, 48 Vdc) 265.0 2.0 40.5 MAX 228 0.5 HEIGHT MEASUREMENT REFERENCE POINT TRIMPOT MODEL LOCATION LABEL UL2517 26AWGX20C+AL UL2517 14AWGX4C 0.2 TIN DIP WIRES 0.2 SJTW 18AWGX3C 146.68 40.66 73.34 73.34 CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW 300 10 45 10 45 93 (3X) 80.1 300 10 30 101 0.5 LCC600 Data Sheet Pin Assignment (INPUT) -9Px Suffix -4Px Suffix DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES Live L1 Brown Mating Connector: SJTW 18AWGX3C; Neutral L2 350766-1 (Housing); Blue PVC jacket; 350536-1 (Contact Terminals) 105 °C / 300 V Ground G Y/GR Pin Assignment (MAIN OUTPUT) -9Px Suffix -4Px Suffix (28, 36, 48 Vdc) -4Px Suffix (12 Vdc) DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES DESIGNATION NOTES 4 Position Terminal Block: M4 Red Main Output +Vout Red Screw/10mm Pitch; 12kgf-cm 14AWGX4C; 6AWG Multi-Strand; Red Torque; Accepts 14-16AWG PVC jacket; PVC jacket; Ring Tongue - Spade Terminals Black 105 °C / 300 V 105 °C / 600 V Main Output MOLEX BB-124-08 (19141- -Vout Black Return GND 0058) or EQUIVALENT Black Pin Assignment -9Px Suffix -4Px Suffix J1501 - Signal & Control SIGNALS DESCRIPTION PIN # NOTES WIRE COLOR NOTES A2_OUT EEPROM Address 1 BLACK GND Ground 2 BROWN A1_OUT EEPROM Address 3 RED -VOUT_RS Remote Sense Return (Main O/P) 4 ORANGE ISHARE Load Share Voltage 5 YELLOW A0_OUT EEPROM Address 6 GREEN 2 SDA Serial Data Signal (I C) 7 BLUE SPARE_1 Spare/Unused Pin (Dimming input for “-4PD” suffix) 8 VIOLET J1501 Mating 2 Connector: SCL Serial clock Signal (I C) 9 GRAY JST PN 26AWGX20C+AL; +VOUT_RS Remote Sense (Main O/P) 10 WHITE PHDR-20VS PVC jacket; 5VSB 5V Standby (1.5A Max) 11 PINK 105 °C / 300 V Contact Pins: SGND 5V Standby Return 12 LIGHT BLUE JST PN SPHD- 001T-P0.5 SPARE_2 Spare/Unused Pin 13 WHITE/VIOLET G_DCOK_C Global DC_OK Collector 14 WHITE/YELLOW WP EEPROM Write Protect 15 WHITE/ORANGE G_DCOK_E Global DC_OK Emitter (GND) 16 WHITE/BLACK 2 GND Return GND for O/P Signal and I C communication 17 WHITE/RED G_ACOK_C Global AC_OK Collector 18 WHITE/BROWN INH_EN Output Inhibit_Enable Pin (turns output off) 19 WHITE/GREEN G_ACOK_E Global AC_OK Emitter (GND) 20 WHITE/BLUE LCC600 Data Sheet Power Derating Curves Figure 1. Output Power vs. Baseplate Temperature Figure 2. Output Power vs. Input Voltage Efficiency Curves Figure 3. Typical Efficiency for 28 V output Figure 4. Typical Efficiency for 48 V output Figure 5. Typical Efficiency for 36 V output Figure 6. Typical Efficiency for 12 V output LCC600 Data Sheet ACCESSORIES Orderable Part Number Description Diagram 70-841-030 For Suffix "-9P" AC Input Mating Connector Cable Assembly (w/ 0.3 m wire length) 73-788-001 J1501 (20 Pin Control Signal) Mating Connector with 0.3 m PIN 20 PIN 19 wires attached for "-9P" suffix PIN 3 PIN 2 PIN 1 300 ± 5 mm 70-841-031 Pre-Cut thermal insulator (Laird TFLEX HR220FG) 700-014447-0000 MIL-STD-461F AC input In-line EMI filter (Zhongguang ZGLPG-10-02M) 2 73-769-002 USB to I C High Speed Adaptor for PMBus Communication 500±5 750-007213-0000 J1501 (20 Pin) Mating connector with 10 Pin header termination A 215±5 150±3 O C for use with 73-769-002 (17X) 300±3 50.0±3 M A B D 17 F E 2 4 9 7 15±3 466-003103-0000 Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm; Aluminum with natural finish; Weight = 1.7 kgs WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2018 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LCC600 DS 28Mar2018