ARTESYN LDS25-36-H03U
Specifications
Manufacturer
Artesyn
Manufacturers Part #
LDS25-36-H03U
Brand
Artesyn Embedded Technologies
Series
LDS25
Factory Pack Quantity
1
Adjust Type
Voltage & Current
Application
LED Power Supply
Compliance
General Safety
Cooling Method
Convection
Dimensions
6.06 x 1.80 x 1.26"
Dimming Capability
Yes
Driving Method
Constant Current
Efficiency
86%
Environmental Conditions
General Purpose
Industry
LED Lighting
Input Type
90-305 VAC
IP Rating
IP20
Mechanical Style
LED Power Supply
Number of Outputs
1
Operating Temperature
-40 to +90°C (case)
Output Amps 1
0.7 A
Output Voltage V1 Nominal
36 V
Package Type
Plastic
PFC
PFC
Power
25 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
POWER LDS25 Series Data Sheet LED Lighting Power Supply Total Power: 25 Watts Current: 300 to 700 mA # of Outputs: Single Special FeatureS Constant Current & Constant Voltage operation 0 - 10 V Dimming Free-Air rated - No forced air necessary for cooling Hot-wiring protection 350 Vac for 2 hours Electrical Specifications compliance Input IP20 and Open-Frame Input ra nge: 120-277 Vac CISPR 15 / FCC Part 15 EMI Performance Input frequency: 47 - 63 Hz Class C Harmonics Inrush current: < 30 A max., cold start @ 25 °C > 0.9 Power Factor Leakage current: 250 µA, at 264 Vac 50/60 Hz Input power (short-circuit): 5 W SaFety Input current (max): < 0.35 A, at full load EN 61347-2-13 Input fusing: Internally fused UL 60950 / 8750 EMI/RFI: CISPR 15 CSA C22.2 No. 107.1 FCC Part 15 CE Mark (LVD) Efficiency (typical): 86% - 230 Vac 86% - 120 Vac Warranty Output Constant current: From 36 V to 26 V Standard 2-Year Warranty Constant voltage: From 300 mA to 700 mA or Programmed Value, whichever is less Output power: 25 W maximum Ripple current: 15% peak; 30% peak-to-peak Control and Protection Current limit: Programmable. Refer to model table for details Protection: Short Circuit Overvoltage Overtemperature Hot wiring protection LDS25 Series Data Sheet Environmental Specifications Criteria Specification Reference Power Factor > 0.9 Energy Star Harmonics Class C IEC 61000-3-2 THD - Input Current < 20% ANSI C82.11 Surge Immunity Level 3 IEC 61000-4-5 EMC Compliance IEC 61000-4-2, -3, -4, -5, -6, -8, -11 Temperature (case) -30 °C to +90 °C Operating Ingress Protection IP20 and Open-Frame Refer to model table for details Mechanical Drawing LDS25-36-H03F 147.0 ± 0.5 Ø3.2 (x4) 134.0 ± 0.3 cn2 mating connector Vendor Name: LANDWIN Housing: 2020S0600 Contact: 2023T011V 4.5 138.0 ± 0.3 LDS25-36-H03U 200 ± 10 200 ± 10 20 ± 5 20 ± 5 154.5 ± 0.5 174.5 ± 0.5 RED / ORANGE (out +) L (Black or Brown) GREEN BROWN (out -) (reserved) 6 - 8 mm (Tin Plating) (Tin Plating) (Lead Free) (Lead Free) N (White or Blue) BLACK BLUE (dimming) 163.0 (reserved) WHITE / YELLOW (SGND) OUTPUT CABLE INPUT CABLE 28.5 MAX. 42.0 ± 0.5 23.5 MAX. 14.0 4.5 4.5 45.6 ± 0.5 33.0 ± 0.3 LDS25 Series Data Sheet Ordering Information Model Number Rated Output Voltage Rated Output Current Dimming Interface IP Rating LDS25-36-H03U 36 Vdc 700 mA dc 0 - 10 V IP20 LDS25-36-H03F 36 Vdc 700 mA dc 0 - 10 V Open-frame Input Connections: 2-Wire LDS25-36-H03F LDS25-36-H03U Function Name Pin# Wire Color Wire Gauge AC input Line L CN1-Black Black or Brown 18AWG AC input Neutral N CN1-Red White or Blue 18AWG Output Connections: 6-Wire LDS25-36-H03F LDS25-36-H03U Function Name Pin# Wire Color Wire Gauge DC Output - Positive OUT+ CN2-1 Red or Orange 22AWG DC Output - Return OUT- CN2-2 Green 22AWG Reserved CN2-3 Brown Reserved CN2-4 Blue Dimming DIMMING CN2-5 Black 22AWG Signal Ground SGND CN2-6 White or Yellow 22AWG Current Adjust and Dimming Description 0 - 10 V Interface Control Voltage between “Dimming” and “SGND” Dimming Resistor between “Dimming” and “SGND” Output Programmed Current Resistor Value Current 300 mA 16.9 kOhm 700 mA 350 mA 22.6 kOhm 500 mA 52.3 kOhm 525 mA 61.9 kOhm 700 mA 511 kOhm 0 – 10 V Signal 010 11 WORLDWIDE OFFICES americas europe (uK) asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of For support: productsupport.ep@artesyn.com this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. LDS25 DS Rev. 08.27.14 © 2014 Artesyn Embedded Technologies, Inc.
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the LDS25-36-H03U?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods