LPS353-CEF - ARTESYN - Electronics Finder

Description

350 W, Single Output, 12 V@29.2 A Industrial U-Frame AC-DC Power Supply
LPS353-CEF

Part Number

LPS353-CEF

Price

Request Quote

Manufacturer

ARTESYN

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

Artesyn

Manufacturers Part #

LPS353-CEF

Brand

Artesyn Embedded Technologies

Series

LPS350

Factory Pack Quantity

Application

General Purpose

Connection Type

Molex/JST

Cooling Method

Air-Cooled

Dimensions

9.00 x 5.00 x 2.50"

Efficiency

75%

Environmental Conditions

General Purpose

Industry

Industrial

Input Type

Mechanical Style

Open / Enclosed Frame

Number of Outputs

Operating Temperature

0 to +70°C, derate linearly to 50% power from 50-70°C

Output Amps 1

29.2 A

Output Voltage V1 Nominal

12 V

Package Type

U-Frame

Power

350 W

Subcategory

AC-DC Power Supply

Datasheet

lps350.pdf

243 KiB

Download

Extracted Text

Embedded Power for Business-Critical Continuity Rev. 11.27.12 LPS350 Series 1 of 3 LPS350 Series 350 Watts Total Power: 350 Watts Input Voltage: 85-264 Vac 120 - 300 Vdc # of Outputs: Single Electrical Specifications Special Features Input • Active power factor correction • IEC EN61000-3-2 compliance Input ra nge 85 - 264 VAC; 120 - 300 VDC • Remote sense on Frequency 47 - 440 Hz • Power fail and remote inhibit Inrush current 38 A max, cold start @ 25 °C • Single wire current sharing • Built-in EMI filter Efficiency 75% typical at full load • 2 Supervisory output 5 V and 12 V EMI filter FCC Class B conducted and radiated • Overvoltage protection CISPR 22 Class B conducted and radiated • Overload protection EN55022 Class B conducted and radiated • Thermal overload protection VDE 0878 PT3 Class B conducted and radiated • DC power good Power factor 0.99 typical • 130 KHz switching frequency 0.5 mA @ 50/60 Hz, 264 VAC input Safety ground • Optional with fan cover -CF leakage current • Cover -C Output • Optional end-mounted fan -CEF Maximum power With cover: 350 W with 30 CFM forced air, (-C) (-CF) (-CEF) Adjustment range 2:1 wide ratio Supervisory output 5 V @ 500 mA regulated, 12 @ 150 mA x2 Safety Hold-up time 20 ms @ 350 W load, 115 VAC nominal line at factory voltage settings VDE 0805/EN60950 (IEC950) 21310-3336-0001 Overload protection Short circuit protection on all outputs. Case overload protected @ 110 - 145% above peak rating UL UL1950 EI86249 Overvoltage protection 5 V output: 5.7 - 6.7 VDC. Other models 10% to 25% above nominal output CSA CSA 22.2-234 Level 5 LR109492C NEMKO EN 60950/EMKO-TUE P98102115 (74-sec) 203 BABT EN60950/BS7002 608857, 608858, 609097 CB Certificate and report 5734, 6280, 6281 CE Mark (LVD) Embedded Power for Business-Critical Continuity Rev. 11.27.12 LPS350 Series Logic Control 2 of 3 Power failure TTL logic signal goes high 50 - 150 msec after 5 V output. It goes low at least 4 msec before loss of regulation Remote on/off Requires an external contact (N.O or N.C) to inhibit outputs DC-OK TTL logic goes high 50 - 150 msec after 5 V output. It goes low when there is loss of regulation Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected Environmental Specifications Operating temperature: 0° to 50°C ambient; Pin Assignments derate each output at 2.5% per degree from 50° to 70 °C SK1 PIN 1 Neutral Storage temperature: -40 °C to +85 °C PIN 2 Line PIN 3 Ground Temperature coefficient: ± 0.4% per °C SK3 PIN 1 N/C Electromagnetic Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 PIN 2 N/C susceptibility: PIN 3 + Sense Humidity: Operating; non-condensing 5% to 95% PIN 4 - Sense PIN 5 POK Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. PIN 6 C. Share dwell at four major resonances 0.7 G peak 5Hz to 500Hz, PIN 7 DC - OK operational PIN 8 Inhibit (N.O.) MTBF demonstrated: > 550,000 hours at full load and 25 °C ambient conditions PIN 9 Inhibit (N.C.) PIN 10 COM SK4 PIN 1 + Fan 1 (12V@150mA) Ordering Information PIN 2 – Common Maximum Load SK5 PIN 1 + 5V aux Model Output Minimum Ripple P/P 1 2 with Convection Peak Load Regulation 3 (5V@100mA) Number Voltage Load (PARD) Cooling PIN 2 – Common LPS352-C5 V (3 - 6 V) 0 A 70 A 80 A ± 2% 50 mV SK6 PIN 1 + Fan 2 LPS353-C12 V (6 - 12 V) 0 A 29.2 A 33 A ± 2% 120 mV (12V@150mA) PIN 2 – Common LPS354-C15 V (12 - 24 V) 0 A 23.3 A 26 A ± 2% 150 mV LPS355-C24 V (24 - 48 V) 0 A 14.6 A 16 A ± 2% 240 mV Mating Connectors 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. SK3 Molex: 22-01-1104 PINS: 08-70-0057 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory SK4 Molex 22-01-3027 settings. PINS: 08-50-0114 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage SK5 Molex 22-01-3027 and load ranges. PINS: 08-50-0114 4. If optional CF or CEF fans are not used, 30CFM forced air cooling needs to be provided and is required SK6 Molex 22-01-3027 through the length of the power supply. Not convection rated. PINS: 08-50-0114 5. Output voltage adjustment requires a 1A load. Astec Connector Kit #70-841-011, includes all of the above. 6. Remote inhibit resets OVP latch. Note: -CF suffix added to the model number indicates cover with fan, -CEF suffix added to model number indicates end-mounted fan chassis. Embedded Power for Business-Critical Continuity Rev. 11.27.12 LPS350 Series Mechanical Drawing 3 of 3 Americas 5810 Van Allen Way 3 (4 plaes ) 6-32 (2 plaes ) 3 (6 plaes ) Carlsbad, CA 92008 ain Otpt 6-32 C (8 plaes ) 3 erinal USA .24 (6.1) lo 1 123 45 678910 Telephone: +1 760 930 4600 ve -ve 5 (5 a) Facsimile: +1 760 930 0698 1 4 Fan Europe (UK) 3.68 6 Fan (93.6) Waterfront Business Park Merry Hill, Dudley 5.46 West Midlands, DY5 1LX (138.6) United Kingdom Telephone: +44 (0) 1384 842 211 6.64 (168.6) Facsimile: +44 (0) 1384 843 355 (-CF) 3.15 8.52 Cover (80) (216.4) Asia (HK) with fan 9.0 14/F, Lu Plaza (228.6) 2 Wing Yip Street 10.78 Kwun Tong, Kowloon (273.8) Hong Kong 2.17 (55) Telephone: +852 2176 3333 Facsimile: +852 2176 3888 3 2 1 Optional 1.18 (30.0) 6-32 (3 plaes ) (-CEF) For global contact, visit: 1 Cover with fans www.Emerson.com/EmbeddedPower 5.0 (127.0) techsupport.embeddedpower 2.5 (63.5) @emerson.com 3.5 (88.9) While every precaution has been taken to ensure .55 accuracy and completeness in this literature, Emerson 1.30 (14) Network Power assumes no responsibility, and disclaims (33.0) all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling .79 3.42 (87.0) business-critical continuity. (20) AC Power Connectivity DC Power Notes: Embedded Computing 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. Embedded Power 3. Specifications are at factory settings Monitoring 4. To enable normally closed Remote Inhibit, cut jumper J1. 5. Mounting maximum insertion depth is 0.12”. Outside Plant 6. Warranty: 2 year Power Switching & Controls 7. Weight: 3.6 lb. / 1.64 kg. Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson and the Emerson Network Power logo are trademarks of Emerson Electric Co. ©2012 Emerson Electric Co. All rights reserved.

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products