POWER LPS360-M Series Low Power Data Sheet 360 Watt AC-DC Power Supply Total Power: 200 - 360 W Input Voltage: 90 - 264 Vac 120 - 300 Vdc Outputs: Single SPECIAL FEATURES ƒ Medical and ITE safeties ƒ Active power factor correction ƒ 3” x 5” footprint ƒ Less than 1U high Electrical Specifications ƒ EN61000-3-2 compliant Input ƒ Remote sense Input ra nge 90 - 264 Vac; 120 - 300 Vdc ƒ Power fail Frequency 47 - 63 Hz ƒ Adjustable main output Inrush current 50 A max., cold start @ 25 °C ƒ Level B Conducted EMI - Class I Efficiency Up to 93% at full load or Class II inputs EMI/RFI FCC Class B conducted; CISPR22 Class B conducted; ƒ Overvoltage protection EN55022 Class B conducted; VDE0878PT3 Class B conducted ƒ Overload protection Power factor 0.99 typical ƒ Thermal overload protection Safety ground leakage 150 µA @ 132 Vac, 60 Hz for class I, 300 µA @ 264 Vac, 60 Hz for class II ƒ 12 V fan output current ƒ LPX200 enclosure kit available Output ƒ 5 V Standby output Maximum power 200 - 240 W (see de-rating) for convection, 360 W with 400 LFM of forced air ƒ Remote Inhibit Adjustment range 12 V and 24 V models, -0%, +15%; 15 V and 48 V models, -5%, +10%; 36 V model, -15%, +0% ƒ PMBus commands Standby output 5 V @ 1A convection, 2 A with forced air ƒ RoHS compliant 2 Fan output 12 V @ 0.5 A convection, 1 A forced air ƒ Digital I C interface Hold-up time 20 ms @240 W, 220 Vac input; 12 ms @ 360 W ƒ Designed to meet Class I and Class II Overload protection Short circuit protection on all outputs. Case overload protected @ 110 - 160% above rating ƒ Dual AC fuses Overvoltage protection 15 - 50% above nominal output ƒ Suitable for BF Type applications Logical Control SAFETY Power failure Open collector logic signal goes high 100 - 500 msec after main output; it goes low at least 6 msec before loss of regulation ƒ TUV 60950, 60601-1 Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense ƒ UL 60950, 60601-1 connected. Reverse connection protected. ƒ cULus 60950, 60601-1 ƒ CB Certificate & report ƒ CE Mark (LVD & EMC) ƒ CCC Approval LPS360-M Series Data Sheet Environmental Specifications Operating temperature -20 °C to 50 °C ambient, derate each output as 2.5% per degree from 50 °C to 70 °C; -40 °C startup if Standby output ≤ 1A (any valid load on main output); -30 °C startup if Standby output > 1A (any valid load on main output) Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 95% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF calculated >2 million hours at full load and 25 °C ambient conditions. 230 Vac input, Bellcore Ordering Information Model Output Minimum Maximum Load with Maximum Load Peak Ripple 2 3 Number Voltage Load Convection Cooling with Forced Air Load Regulation P/P (PARD) LPS363-M 12 V 0 A 20 A 30 A 39 A ±2% 120 mV LPS364-M 15 V 0 A 16 A 24 A 31 A ±2% 150 mV LPS365-M 24 V 0 A 10 A 15 A 19.5 A ±2% 240 mV 4 4 LPS366-M 36 V 0 A 6.25 A 11.25 A 14.62 A ±2% 360 mV LPS368-M 48 V 0 A 5 A 7.5 A 9.75 A ±2% 480 mV 1. Peak current lasting <3 seconds. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 mHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. LPS366-M is limited to the lower of the applicable power rating or current rating, whichever results in lowest power. 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Mating Connectors Connector LPS360-M J4 AC Input Molex 09-50-3031 (connector) PINS: 08-52-0072 J4 Pin 1 Line J6 AC Ground Molex 01-90020001 Pin 3 Neutral DC Output Molex 19141-0058/0063 or 19099/0048 Barr Barr-1 Main output + (Barr) Spade lug based on Cable Ampacity/AWG Barr-2 Main output common J5 Control Signals Molex 90142-0010 (USA) PINS: 90119-2110 J5 Pin 1 +V1 Remote sense Pin 2 -V1 Remote sense J3 Fan Output Molex 51065-0200 Pins: 50212-8100 Pin 3 +5 V Standby The Artesyn Connector Kit #70-841-029, includes all of the above. Pin 4 5 V Standby return 1. Specifications subject to change without notice. Pin 5 +Power fail 2. All dimensions in inches (mm), tolerance is ±0.02”(±0.5 mm) Pin 6** Forced air operation 3. Mounting holes MH1 and MH2 should be grounded for EMI purposes. Pin 7 Inhibit 4. Mounting hole MH1 is safety ground connection. Pin 8 GND 5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated. Pin 9 SDA 6. This power supply requires mounting on metal standoffs 0.20” (5m) in height. Pin 10 SCL 7. Warranty: 3 Years J3 Pin 1 +12 V Fan 8. Weight: 0.4kg / 0.88 lb (LPS363-M) Pin 2 12 V fan Return (isolated) ** For forced air operation, connect pin 6 to pin 8 of J5. 2 Digital I C Interface Accessories 2 73-769-001 USB to I C Adapter with USB Cable 2 73-841-030 LPS360-M I C Mating Connector Artesyn Connector Kit #73-769-005 includes both of the above LPS360-M Series Data Sheet Mechanical Drawings 3 [76,2] 2,55 [64,8] PIN 3 J4 PIN 1 GROUND TAB (J6) 1.36 [34.60] 0.197 MINIMUM STANDOFF HEIGHT [5.00] PIN 1(+V1 REMOTE SENSE) 5 1 6 10 J5 PIN NUMBERING BARR1(+) J3 J5 BARR2(-) M4X0.7P VR 1 OUTPUT VOLTAGE ADJUSTMENT POST Performance Data WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPS360-M DS 18Mar2016 4X 0,16 [4] 4,55 [115,6] 5 [127]