POWER LPS40-M Series Data Sheet 40 Watts Medical Total Power: 40 - 55 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Medical safety approvals ƒ Universal input ƒ 3” x 5” footprint ƒ Less than 1U high ƒ Remote sense on main output ƒ Low output ripple ƒ Adjustable 5V output ƒ Overvoltage protection Electrical Specifications ƒ Overload protection ƒ 110 KHz switching frequency Input ƒ RoHS compliant Input range 85 - 264 Vac; 120 - 300 Vdc ƒ LPX40 enclosure kit available Frequency 47 - 440 Hz Inrush current < 18A peak @ 115 Vac; <36A peak @ 230 Vac, cold start @ 25 °C SAFETY Input current 1A max. (RMS) @ 115 Vac ƒ VDE 0750/EN60601-1 Efficiency 70% typical at full load (IEC601) EMI filter FCC Class B conducted; CISPR 22 Class A conducted; ƒ UL UL2601 E182560 EN55022 Class A conducted; VDE 0878 PT3 Class A conducted ƒ CSA CSA 22.2 No.601.1 Safety ground leakage current < 75 μA @ 50/60 Hz, 264 Vac input LR109492 Output ƒ CE Mark (LVD) Maximum power 40 W for convection; 55 W with 30CFM forced air Adjustment range -5, +10% minimum Hold-up time 20 ms @ 40 W load, 115 Vac nominal line Overload protection Short circuit protection on all outputs Case overload protected @ 110 - 145% above peak rating Overvoltage protection 5 V output; 5.7 to 6.7 Vdc. Other outputs 10% to 25% above nominal output Remote sense Compensates for 0.5 V lead drop minimum Will operate without remote sense connected Reverse connection protected LPS40-M Series Data Sheet Environmental Specifications Operating temperature 0° to 50 °C ambient. Derate each output 2.5% per degree from 50° to 70 °C, -20 °C startup Storage temperature -40 °C to +85 °C Temperature coefficient ± 0.4% per °C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating; non-condensing 5% to 95% RH Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500 Hz, operational MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Ordering Information Maximum Load Maximum Load Model Output Minimum Ripple 1 2 with Convection with 30CFM Peak Load Requlation 3 Number Voltaqe Load P/P(PARD) Cooling Forced Air LPS42-M 5 V 0A 8 A 11 A 12 A ± 2% 50mV LPS43-M 12 V 0A 3.3 A 4.5 A 5 A ± 2% 120 mV LPS44-M 15 V 0A 2.6 A 3.6 A 4 A ± 2% 150 mV LPS45-M 24 V 0A 1.6 A 2.3 A 2.5 A ± 2% 240 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Power Derating Curve 55W 30 CFM Forced Air Cooling 40W 30W Output 27.5W Natural Power Convection (Watts) 20W 20W Cooling 10W 0W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C TA – Ambient Temperature – °C LPS40-M Series Data Sheet Mechanical Drawing Pin AssignmentsMating Connectors Connector LPS42-M LPS43-M LPS44-M LPS45-M Molex 09-50-8031 (USA) AC Input 09-93-0300 (UK) SK1-1 Line Line Line Line PINS: 08-52-0113 SK1-3 Neutral Neutral Neutral Neutral Molex 09-50-8061 (USA) DC Outputs SK2-1 +5 V +12 V +15 V +24 V 09-93-0600 (UK) SK2-2 +5 V +12 V +15 V +24 V PINS: 08-52-0113 SK2-3 +5 V +12 V +15 V +24 V Remote Sense Molex 22-01-2025 PINS: 08-52-0123 SK2-4 Common Common Common Common SK2-5 Common Common Common Common Artesyn Embedded Technologies Connector Kit #70-841-006, includes all of the above SK2-6 Common Common Common Common 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02”(± 0.5mm) SK201-1 +Sense +Sense +Sense +Sense 3. Mounting holes M1 and M2 should be grounded for EMI purposes. SK201-2 -Sense -Sense -Sense -Sense 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated. 6. Warranty: 2 years 7. Weight: 0.5lbs/0.23kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPS40-M Series-DS 18Mar2016