POWER LPS50-M Series Data Sheet 60 Watts Total Power: 55 - 60 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Medical safety approvals ƒ Universal input ƒ 2” x 4” footprint ƒ Less than 1U high ƒ Remote sense ƒ Overload and short circuit protection Electrical Specifications ƒ Adjustable output voltage Input ƒ High efficiency ƒ High MTBF Input range 90 - 264 Vac (wide range) 1 ƒ Built in EMI filter (CISPR 22 Class B) 127 - 300 Vdc ƒ LED power good indicator Frequency 47 - 63 / 440 Hz (Safety rating 50/60 Hz) ƒ Input power < 74 watts Inrush current <60 A peak @ 230 Vac, cold start @ 25 °C ƒ Complies with EN61000-3-2 Input power <74 Watts ƒ RoHS compliant Efficiency 80 - 85% typical at full load ƒ UL Class I approved EMI/RFI FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class ƒ LPX100 enclosure kit available B conducted; VDE0878PT3 Class B conducted. ƒ Dual AC fuses Safety ground 275 μA @ 50/60 Hz; 264 Vac input leakage current SAFETY Output ƒ UL UL 60601-1 Maximum power 60 W for convection (LPS52 is 55 W) ƒ CSA CSA-C22.2 No. 601.1-M90 Adjustment range +20% minimum ƒ VDE EN60601-1 Hold-up time 10/20 ms 115/230 Vac input line ƒ CE LVD & EMC Overload protection Short circuit protection on all outputs. Case overload protected @ 110-160% of normal rating Overvoltage protection 30% to 50% above nominal output Remote sense Compensates for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. 1 DC input rating is not part of the product’s Safety approval. CN1 C2 C3 R22 D4 R3A TH1 C17 R3 L2 F1 LED1 LPS50-M Series Data Sheet Environmental Specifications Operating temperature 0° to 50 °C ambient derate each output 2.5% per degree from 50° to 70 °C. -20 °C start up. Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet IEC61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11 Level 3 Humidity Operating; non-condensing 10% to 95% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated >550,000 hours at full load and 25 °C ambient conditions Mechanical Drawings VR1 Output Voltage Adjust Pot M1 M2 C4 TP2 Q5 J4 + GRN/ DB1 VR1 YEL ~ ~ C32 C27 TP1 L3 T1 GND SK2 C30 1 L1 C22 A C5 1 1 B T2 3 E F 6 SK1 T3.15A 2.5A J1 J2 F2 C1 HTSK_SEC 250VAC G H D C9 Q6 I D2 J3 J 2005 04272000202X-JA 3.73" Mounting Hole [94.7] Ø0.16"[4.0] 4 Places 4.00" Max. Screw Head [101.6] Diamater .22” (5.6) 0.16" [4.0] 0.197” (5.0) Minimum Standoff Height C18 R1 C24 2.00" [50.8] T3.15A 2.5A 250VAC DIP 1.72" 1.30" [43.8] [33.0] R26 LPS50-M Series Data Sheet Ordering Information Maximum Load Maximum Load Ripple 1 2 Model Number Output Voltage Minimum Load with Convection with 30CFM Peak Load Regulation 3 P/P (PARD) Cooling Forced Air LPS52-M 5 V 0 A 11 A 12 A 13 A ±2% 50 mV LPS53-M 12 V 0 A 5 A 5.4 A 5.5 A ±2% 120 mV LPS54-M 15 V 0 A 4 A 4.4 A 4.4 A ±2% 150 mV LPS55-M 24 V 0 A 2.5 A 2.75 A 2.75 A ±2% 240 mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin AssignmentsMating Connectors Connector LPS52-M LPS53-M LPS54-M LPS55-M LPS58-M Molex 09-50-8031 (USA) AC Input 09-93-0300 (UK) SK1-1 Line Line Line Line Line PINS: 08-52-0113 SK1-3 Neutral Neutral Neutral Neutral Neutral Molex 09-50-8061 (USA) DC Outputs SK2-1 +5 V +12 V +15 V +24 V +48 V 09-93-0600 (UK) SK2-2 +5 V +12 V +15 V +24 V +48 V PINS: 08-52-0113 SK2-3 Common Common Common Common Common Astec Connector Kit #70-841-006, includes all of the above SK2-4 Common Common Common Common Common 1. Specifications subject to change without notice. SK2-5 -Sense -Sense -Sense -Sense -Sense 2. All dimensions in inches (mm), tolerance is ±0.02”(± 0.5 mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. SK2-6 +Sense +Sense +Sense +Sense +Sense 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated. 6. Warranty: 2 years 7. Weight: 0.41lbs/0.18kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPS50-M Series-DS 08Feb2017