POWER LPT50 Series Data Sheet 55 Watts Total Power: 47 - 55 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Triple SPECIAL FEATURES ƒ Universal input ƒ 2” x 4” footprint ƒ Less than 1U high ƒ Overpower and short circuit protection ƒ High efficiency ƒ High MTBF ƒ Built in EMI filter (CISPR 22 Class B) ƒ LED power good indicator Electrical Specifications ƒ Input power < 74 watts ƒ Complies with EN61000-3-2 Input ƒ 85 kHz switching frequency Input range 90 - 264 Vac (wide range) 127-300 Vdc ƒ UL Class I approved Frequency 47 - 440 Hz ƒ LPX50 enclosure kit available Inrush current < 60 A peak @ 230 Vac, cold start @ 25 °C ƒ RoHS compliant Efficiency 80% typical at full load EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; SAFETY EN55022 Class B conducted ƒ UL: UL 60950-1 Safety ground leakage current 0.5 mA @ 50/60 Hz; 264 Vac input ƒ CSA: CSA-C22.2 No. 60950-1 Output ƒ TUV: EN60950-1 Maximum power 55 W for convection (LPT51, 47.4 W) ƒ CB: Certificate and report Hold-up time 10/ 20 ms 115/230 Vac input line ƒ CE: LVD & EMC Overpower protection Short circuit protection on all outputs. Case overpower protected @ 110-160% of normal rating Overvoltage protection 30-50% above nominal output Environmental Specifications 0 °C to 50 °C ambient. Derate each output as 2.5% per degree Operating temperature from 50 °C to 70 °C. -20 °C startup Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 95% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions LPT50 Series Data Sheet Ordering Information Ripple Maximum Load with 1 2 Model Number Output Voltage Minimum Load Peak Load Regulation 3 Convection Cooling P/P (PARD) +3.3 V 0.8 A 8 A 9 A ±2% 50 mV LPT51 +5 V 0.1 A 3 A 4 A ±6% 50 mV +12 V 0 A 0.5 A 1 A ±5% 120 mV +5 V 0.5 A 8 A 9 A ±2% 50 mV LPT52 +12 V 0.1 A 3 A 4 A ±5% 120 mV -12 V 0 A 0.5 A 1 A ±5% 120 mV +5 V 0.5 A 8 A 9 A ±2% 50 mV LPT53 +15 V 0.1 A 2.4 A 3.2 A ±5% 150 mV -15 V 0 A 0.5 A 0.7 A ±5% 150 mV +5 V 0.5 A 8 A 9 A ±2% 50 mV LPT54 +24 V 0.1 A 1.5 A 2 A ±7% 240 mV +12 V 0 A 0.5 A 0.7 A ±5% 120 mV 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Connector LPT51 LPT52 LPT53 LPT54 SK1-1 Neutral Neutral Neutral Neutral SK1-3 Line Line Line Line SK2-1 +3.3 V +5 V +5 V +5 V SK2-2 +3.3 V +5 V +5 V +5 V SK2-3 Common Common Common Common SK2-4 Common Common Common Common SK2-5 +12 V -12 V -15 V +12 V SK2-6 5 V +12 V +15 V +24 V Mating Connectors Molex 09-50-8031 (USA) AC Input 09-91-0300 (UK) PINS: 08-52-0113 Molex 09-50-8061 (USA) DC Outputs 09-91-0600 (UK) PINS: 08-52-0113 Artesyn Embedded Technologies Connector Kit #70-841-006, includes all of the above LPT50 Series Data Sheet Mechanical Drawing M1 M2 6 1 3 1 GND Mounting hole 3.73 Ø4.0(4x) [94.7] Max. Screw Head 4.00 Diameter .22” (5.6) [101.6] 0.197” (5.0) Minimum Standoff Height Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02”(±0.5mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated. 6. Warranty: 2 year 7. Weight: 0.45 lbs/0.20 kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPT50 Series-DS 21Mar2016 1.30 [32.9] 1.72 [43.8] 2.00 [50.8]