POWER NFS40 Series Data Sheet Single and triple output Total Power: 40 - 50 W Input Voltage: 85-264 Vac 120 - 370 Vdc # of Outputs: Single, Triple Special FeatureS ƒ 5.0 x 3.0 x 1.2 inch package (1U applications) ƒ Industry standard package ƒ Overvoltage and short circuit protection ƒ 40 W with free air convection ƒ 50 W with 20 CFM forced air ƒ EN55022, EN55011 conducted noise level B ƒ UL, VDE and CSA safety approvals Electrical Specifications ƒ Available RoHS compliant Input ƒ 2 years warranty Voltage adjustability: +5V output on triples ± 5.0% Vout on singles ± 5.0% SaFety Line regulation: Main output ± 0.2% ƒ VDE0805/EN60950/ LL to HL, FL Auxiliary outputs ± 1.0% ƒ IEC950/IEC1010 Load regulation: Main output ± 2.0% ƒ File No. 10401-3336-0044 FL to NL Auxiliary outputs ± 5.0% ƒ License No. 2559 Transient response: +5V (1.5 - 3A) ± 120 mV max. dev. 500 μs recovery ƒ UL60950-1 File No. E13002 Temperature coefficient: All outputs ± 0.02%/°C ƒ CSA C22.2 No. 950 Overvoltage protection: +5V output S3.15 A, 250 Vac In live and neutral ƒ File No. LR41062C Output power limit: Primary power limited 90 W input power limit Short circuit protection: Single outputs Multiple Continuous outputs Short term Output Input voltage range: Universal input 85 - 264 Vac 120 - 370 Vdc Input frequency range: 47-440 Hz Max. input surge current: 132 Vac, cold start 12 A max. 264 Vac, cold star 24 A max. Safety ground leakage 110 Vac, 60 Hz 0.13 mA, max. current: 230 Vac, 50 Hz 0.32 mA, max. All specifications are typical at nominal input, full load at 25°C unless otherwise stated NFS40 Series Data Sheet (11, 12) EMC Charateristics Conducted emissions: EN55022, FCC part 15 Level B Radiated emissions: EN55022 Level A ESD air: EN61000-4-2, level 3 Perf. criteria 1 ESD contact: EN61000-4-2, level 4 Perf. criteria 1 Surge: EN61000-4-2, level 3 Perf. criteria 1 Fast transients: EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity: EN61000-4-3, level 3 Perf. criteria 2 Conducted immunity: EN61000-4-6, level 3 Perf. criteria 2 General Specifications Hold-up time: 110 Vac, 40W 14 ms 230 Vac, 40W 110 ms Efficiency: 70% typical Isolation voltage: Input/output 3000 Vac Input/chassis 1500 Vac Switching frequency: Variable Approvals and standards: VDE0805, EN60950, IEC950, IEC1010, (see Notes 9, 13) UL1950, CSA C22.2 No. 950 Weight: 280g (9.88 oz) MTBF demonstrated: MIL-HDBK-217E 170,000 hours Environmental Specifications Thermal performance: Operating 0°C to +70°C (See Notes 8, 10) Non-operating -40°C to +85°C 50°C ambient temp., convection cooled 40W Forced air cooling 50W @ 20 CFM +50°C to +70°C ambient Derate linearly to 50% load Peak (60 seconds) 60W Relative humidity: Non-condensing 5 to 80% RH Altitude: Operating 10,000 feet max. Non-operating 40,000 feet max. Vibration (See Note 11): 5-500Hz 2.4 G rms peak NFS40 Series Data Sheet Ordering Information Output Current Output Total (4) (13, 14, F) Ripple Model Numbers (5) (1) (2) (3) Voltage Regulation Max Peak Fan (5,6) +5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7608J +12 V (B) 2 A 3 A 2 A 120 mV ± 5.0% –12 V (C) 0.35 A 1 A 0.5 A 120 mV ± 5.0% (12) +5.1 V (A) 4 A 7 A 5 A 50 mV ± 2.0% NFS40-7628J +12 V (B) 0.35 A 1 A 0.5 A 120 mV + 5.0% -12 V (C) 0.35 A 1 A 0.5 A 120 mV + 5.0% (5,6) +5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7607J +12 V (B) 2 A 3 A 2 A 120 mV ± 5.0% -5.0 V (C) 0.35 A 1 A 0.5 A 50 mV ± 5.0% (5,6) +5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7610J +15 V (B) 2 A 2.5 A 2 A 150 mV ± 10.0%/-3.0% –15 V (C) 0.35 A 1 A 0.5 A 150 mV ± 5.0% 3.3 V 6 A 12 A 8 A 100 mV ± 2.0% NFS40-76S3J +5.1 V 6 A 12 A 8 A 100 mV ± 2.0% NFS40-7605J +12.0 V 3.3 A 5 A 4 A 120 mV ± 2.0% NFS40-7612J +15.0 V 2.6 A 4 A 3.3 A 150 mV ± 2.0% NFS40-7615J +24.0 V 1.6 A 2.5 A 2 A 240 mV ± 2.0% NFS40-7624J Notes 1. Natural convection cooled, 40W maximum. 2. Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, outputs may go outside of total regulation limits. Peak total power must not exceed 60W. 3. Forced air, 20 CFM at 1 atmosphere, 50W maximum. 4. Figure is peak-to-peak. Output noise is measured across a 50 MHz bandwidth using a 12 inches twisted pair, terminated with a 47 μF capacitor. 5. Total regulation is defined as the static output regulation at 25°C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. Also, 0.2550°C, for optimum reliability no part of the heatsink should exceed 110 °C and no semiconductor case temperature should exceed 115°C. 9. A 4 W minimum load is recommended to achieve the design MTBF. 10. Caution: Allow a minimum of 1 second after disconnecting the power when making thermal measurements. 11. Three orthogonal axes, sweep at 1 octave/minute, 5 minutes dwell at four major resonances. 12. The NFS40-7628J has separately linear regulated +12 V and -12 V outputs. The loading conditions in Notes 5 and 6 do not apply. 13. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 14. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 15. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. NFS40 Series Data Sheet Pin Assignments J1 -7608J, -7628J -7607J -7610J SINGLES Pin 1 AC Live AC Live AC Live AC Live Pin 2 AC Neutral AC Neutral AC Neutral AC Neutral J2 Pin 1 +12 V +12 V +15 V +Vout Pin 2 +5.1 V +5.1 V +5.1 V +Vout Pin 3 +5.1 V +5.1 V +5.1 V +Vout Pin 4 Return Return Return Return Pin 5 Return Return Return Return Pin 6 -12 V -5 V -15 V Return (c) P1 Pin 1 Safety Ground DERATING CURVE Output Power (Watts) 50 W 20 CFM FORCED AIR COOLING 40 W NATURAL 25 W CONVECTION 20 W COOLING 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C NFS40 Series Data Sheet Mechanical Drawings 5.00 (127.00) 0.156 (3.96) Dia. (4 Places) MAXIMUM COMPONENT HEIGHT 1.2 inches NON-METALLIC C5 STAND-OFF (SEE NOTE A) Q1 1 J1 2.550 ~ (64.8) 3.00 N T1 (76.2) ~ L J2 F1 F 3.15A, H 250VAC P1 (SEE NOTE C) 0.22 (5.59) 0.22 4.55 (5.59) (115.8) ALL DIMENSIONS IN INCHES (mm) Notes 1. In order to meet safety requirements, a non-metallic stand-off is mandatory for one hole as specified in the mechanical drawing above. 2. The ground pad of the mounting hole near P1 allows system grounding through a metal stand-off. 3. To improve conducted noise, the ground pad of the mounting hole near the output connector should be connected with the ground pad of the mounting hole near P1. Use metal stand-offs attached to a common metal chassis. This connection also significantly attenuates common mode noise. 4. A standard enclosure kit is available for mounting which contains all screws, connectors and necessary mounting hardware. Order part number NFS40CJ. WORLDWIDE OFFICES americas europe (uK) asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of For support: productsupport.ep@artesyn.com this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. NFS40 Series-DS 07.01.14 © 2014 Artesyn Embedded Technologies, Inc.