Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 1 of 4 NFS80 Series Quad output Total Power: 80 - 110W Input Voltage: 90 - 264VAC 120 - 370VDC # of Outputs: Quad Special Features • 7.0 x 4.25 x 1.8 inch package • Overvoltage and The NFS80 series is a 80 W universal input ac-dc power supply on a short circuit protection • 80 W with free air convection 7 x 4.25 inch card. The NFS80 series has two quad output models • Adjustable outputs with a very high peak capability on the auxiliary outputs for drive • Isolated output • Floating fourth output and motor applications. The NFS80 provides 80 W of output • EN55022, EN55011 power with free air convection cooling which can be boosted to conducted emissions level B • UL, VDE and CSA 110 W with 20 CFM of forced air. Standard features include safety approvals overvoltage and short-circuit protection. The series, with full • Available RoHS compliant international safety approval and the CE mark, meets conducted • 2 year warranty emissions EN55022 level B. The NFS80 series is designed for use in low power data networking, computer, telecom and industrial applications such as servers, PABX's, storage devices, vending machines and printers. Safety VDE0805/EN60950/ IEC950/IEC1010 File No. 10401-3336-0213 Licence No. 40014677 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series Specifications 2 of 4 All specifications are typical at nominal input, full load at 25°C unless otherwise stated (11,C) OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Output voltage +5 V output on multi’s ±3.0% Surge EN61000-4-5, level 3 Perf. criteria 1 adjustability Vout on singles Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 1 Line regulation Main output ±0.1% max. Conducted immunity EN61000-4-6, level 3 Perf. criteria 1 LL to HL, FL Auxiliary outputs ±0.1% max. GENERAL SPECIFICATIONS Total regulation (See Note 5) See table Hold-up time 110 Vac, @ 80 W 35 ms Overshoot/undershoot At turn-on 0% 110 Vac, @ 110 W 17 ms 230 Vac, @ 80 W 140 ms Transient response +5 V (1 A to 12 A) ±150 mV peak 230 Vac, @ 110 W 100 ms 1 ms recovery Efficiency 70% typical Temperature coefficient All outputs ±0.02%/°C Isolation voltage Input/output 3000 Vac Overvoltage protection +5 V output 140% Vout max. Input/chassis 1500 Vac Minimum output current Main output 1 A Switching frequency 20-70 kHz See derating curve Auxiliary output 0 A Approvals and VDE0805, EN60950, IEC950 Output power limit Primary power limit 160 W Pin max. standards IEC1010, UL1950 110 W Pout min. (See Note 10) CSA C22.2 No. 950 Short circuit protection Yes with auto recovery Weight 600 g (21.18 oz) INPUT SPECIFICATIONS MTBF (See Note 7) MIL-HDBK-217E @ 25 °C 250,000 hours Input voltage range Universal input 90-264 Vac ENVIRONMENTAL SPECIFICATIONS 120-370 Vdc Thermal performance Operating, see curve 0 °C to +70 °C Input frequency range 47-440 Hz Non-operating –40 °C to +85 °C 50 °C to +70 °C Derate Input surge current 115 Vac, cold start 19 A natural convection 2 W/°C 230 Vac, cold start 38 A 50 °C to +70 °C Derate Safety ground 110 Vac, 60 Hz 0.2 mA 20 CFM forced air cooling 2.75 W/°C leakage current 230 Vac, 50 Hz 0.4 mA Relative humidity 5% to 95% RH (11,C) EMC CHARACTERISTICS Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Conducted emissions EN55022,FCC part 15 Level B Radiated emissions EN55022 FCC part 15 Level B Vibration (See Note 9) 5-500 Hz 2.4 G rms approx. ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1 Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series Specifications Contd. 3 of 4 OUTPUT CURRENTS OUTPUT TOTAL (4) (12,13,E) RIPPLE MODEL NUMBER (5) VOLTAGE REGULATION (1) (2) (3) MAX PEAK FAN +5 V (I ) 8 A 20 A 15 A 50 mV ±2.0% NFS80-7602J A +24 V (I ) 2 A 3 A 2.5 A 240 mV +10.0/-5.0% B +12 V 2.5 A 6 A 3 A 120 mV ±3.0% (6) ±12 V 2.5 A 6 A 3 A 120 mV ±3.0% +5 V (I ) 8 A 20 A 15 A 50 mV ±2.0% NFS80-7606J A +24 V (I ) 2 A 3 A 2.5 A 240 mV +10.0/-5.0% B +15 V 2.5 A 6 A 3 A 150 mV ±3.0% ±15 V (6) 2.5 A 6 A 3 A 150 mV ±3.0% Notes 1 Natural convection cooling. DERATING CURVE 2 Peak output current lasting less than 60 seconds with duty cycle ≤10%. During Output Power (Watts) peak loading, outputs may exceed total regulation limits. 110W 3 Forced air cooling, 20 CFM @ 1 atmosphere. 4 50 MHz bandwidth, peak-to-peak, measured differentially. 20 CFM FORCED AIR COOLING 5 Total regulation is defined as the static output regulation at 25 °C, including 80W initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. Also, for stated regulation on the +24 V output, I / I ≤ 5. A B 6 Pins 10 and 11 are a floating output, which can be referenced as either positive or negative. Pin 10 is positive with respect to pin 11. Either pin 10 or 11 must NATURAL 55W be connected to return (pins 4-7) for proper operation. CONVECTION 7 Derating curve is application specific for ambient temperatures > 50 °C, for COOLING 40W optimum reliability, no part of the heatsink should exceed 110 ºC and no semiconductor case temperature should exceed 115 ºC. 8 Caution: Allow a minimum of 1 second after disconnecting the power when making thermal measurements. 9 Three orthogonal axes, random vibration, 10 minute test for each axis. 10 This product is only for inclusion by professional installers within other 5W MINIMUM LOAD NECESSARY 5W equipment and must not be operated as a stand alone product. ° ° ° ° ° ° ° ° 11 For EMI compliance unit may need to be mounted on a metal chassis. 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C 12 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 13 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 4 of 4 Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com technicalsupport@powerconversion.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.