POWER NLP250 Series Data Sheet Single Output Total Power: 250 W Input Voltage: 85 - 264 Vac # of Outputs: Single SPECIAL FEATURES ƒ Active PFC and EN61000-3-2 compliant ƒ 250 W on main channel with forced air ƒ Low profile fits 1U applications ƒ U-Channel for maximum thermal performance Electrical Specifications ƒ Optional cover (CJ suffix) Input ƒ 5 V standby output Input voltage range Universal input 85 - 264 Vac ƒ 12 V fan output Input frequency range 47 - 63 Hz ƒ Integrated ORing diode Input surge current 264 Vac (cold start) 40 A max. ƒ Active current sharing Safety ground leakage current 264 Vac, 50 Hz 1 mA ƒ Integrated control and monitoring features Input current 120 Vac @ 250 W 2.78 A rms 230 Vac @ 250 W 1.36 A rms ƒ Overcurrent, overvoltage and overtemperature protection Input fuse: UL/IEC127 T6.3 AH, 250 Vac ƒ Compliance to EN55022-B Output conducted noise standard Maximum power 200 LFM forced air 250 watts ƒ RoHS compliant 250 LFM with cover ƒ Two year warranty Adjustment range Main output ± 5% Total regulation Main output ± 2.0% SAFETY (line and load) Auxiliary outputs ± 5.0% ƒ VDE 0805/EN60950-1 Turn-on delay @ 120 Vac Input 2.0 s max. IEC 950/IEC60950-1 Transient response Main output 5.0% or 250 mV File No. 1177400-3336-0759 50 - 100% max. dev., 1 ms max ƒ UL/cUL 60950-1 Step at 0.5 A/µs recovery to 1% CSA-C22.2 60950-1 Temperature coefficient ±0.02%/°C File No. E186249 Overvoltage protection Main output 115%, ± 5% ƒ Certificate No. 40014041 Short circuit protection Cyclic operation Continuous ƒ CB Ref DE1-32468 Minimum output current Singles 0 A 5 Vsb 5 V @ 1.0 A Auxiliary outputs (See Note 8) 12 V (fan) 12 V @ 0.3A All specifications are typical at nominal input, full load at 25 °C unless otherwise stated NLP250 Series Data Sheet (5) EMC Characteristics Conducted emissions EN55022, FCC part 15 Level B Harmonic current correction EN61000-3-2 Compliant Voltage flicker EN61000-3-3 Compliant ESD air EN61000-4-2 Level 3 ESD contact EN61000-4-2 Level 3 Radiated immunity EN61000-4-3 Level 3 Fast transients EN61000-4-4 Level 3 Surge EN61000-4-5 Level 3 Conducted immunity EN61000-4-6 Level 3 General Specifications Hold-up time 85 Vac @ 50 Hz 20 ms @ 250 W Efficiency 115 Vac @ 250 W 84% typ. 230 Vac @ 250 W 86% typ. Isolation voltage Input/output 3000 Vac Input/chassis 1500 Vac Safety approvals (see note 6) UL/cUL UL60950-1, VDE EN60950-1, CAN/CSA22.2 No. 60950-1 Weight 650g (22 oz) Telcordia SR-332 317,000 hours min. MTBF (@25 ºC): MIL-HDBK-217F 158,000 hours min. Environmental Specifications Thermal performance Operating ambient, 0 °C to +70 °C (See derating curve) Non-operating -40 °C to +85 °C 0 °C to 50 °C ambient, 250 W 200 LFM forced air 250 LFM with cover 0 °C to 50 °C ambient, 175 W 0 °C to 40 °C with cover Convection cooled 50 °C to 70 °C ambient, Derate linearly Convection cooled to 50% load Relative humidity Non-condensing 5 - 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 7) 5-500 Hz 2.5 G rms peak Shock 5-500 Hz 516.4 Part IV NLP250 Series Data Sheet Ordering Information Output Current (9, 10) (3) Output Voltage Ripple Total Regulation Model Numbers (1,4) (2,4) Min Max (free air) Max (forced air) 12 V 0 A 14.6 A 21 A 120 mV ± 2.0% NLP250R-96S12J 24 V 0 A 7.3 A 10.5 A 240 mV ± 2.0% NLP250R-96S24J 48 V 0 A 3.65 A 5.25 A 480 mV ± 2.0% NLP250R-96S48J Notes 1 Free air convection. Maximum continuous output power not to exceed 175W. Refer to Figure 1 for the derating curve. 2 200 LFM (250 LFM with cover) forced air cooling from the longer side. Maximum continuous output power not to exceed 250 W. 3 Figure is peak-to-peak for room temperature rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF tantalum capacitor and a 0.1 µF ceramic capacitor. 4 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 115 °C and no semi-conductor case temperature should exceed 120 °C. 5 No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 5 Vsb (standby) output is available whenever AC is present, regardless of remote ON/OFF signal status. 12 V (fan) present when main output is present. 9 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. “CJ” suffix indicates covered RoHS version. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. 11. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Mechanical Drawing CUSTOMER MOUNTING HOLES MAX. TIGHTENING TORQUE MAX. SCREW PENETRATION 0.08in 3.1 in-1b(0.36N.m) 6-32 J1 1.140 1 E (28.96) L J3 N JP1 1 VR7 J4 M3.0 5.850 (148.59) J2 1 0.25 (6.35) 6.250 (158.75) M3.0 7.000 [177.80] 4 PLACES 6-32 4 PLACES 4.700 (119.38) 5.500 (139.70) 1.500 [38.10] BOTTOM VIEW 4.000 [101.60] 0.750 (19.05) 2.500 (63.50) NLP250 Series Data Sheet Derating Curve Derating Curve With Cover DERATING CURVE Output Power (Watts) Output Power (Watts) Output Power (Watts) All Models All Models Forced Air Forced Air 250 W 24 V Free Air 24/48 V Free Air 250 W 200 LFM (1.0 m/s) 250 LFM (1.25 m/s) FORCED AIR COOLING 12 V Free Air FORCED AIR COOLING 175 W 12 V Free Air 175 W 125 W 125 W NATURAL FREE AIR 87 W NATURAL FREE AIR CONVECTION COOLING 75 W CONVECTION COOLING 75 W 0 W 0 W 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C Connector and Mating Connector Types Connector Type Mating Connector Type J1 Molex 09-65-2058 (5273 series)void pins 2 and 4 Molex 09-50-8051 or equivalent with Molex 08-52-0113 or equivalent crimp or equivalent terminals J2 Molex 22-23-2021 (6373 series) or equivalent Molex 22-01-3027 (2695 series) or equivalent with Molex 08-50-01113 (2759 series) or equivalent crimp terminals Molex terminal block 387007504 or equivalent Terminal block contains #6-32 screw with clamp washer suitable for wire size J3 2 12-22 awg (0.5-2.5 mm ). Max Torque tp 1.36 Nm (12 in.lb) J4 Molex 22-23-2091 (6373 series) or equivalent Molex 22-01-3097 (2695 series) or equivalent with Molex 08-50-0113 (2759 series) or equivalent crimp terminals Pin Connections Pin Connections Continued J4 J1 Pin 1 Ground/Earth Pin 1 +S +Vo Remote Sense Pin 2 -S Vo Remote Sense Pin 2 Live Pin 3 LS Load Share Signal Pin 3 Neutral Pin 4 PS OFF Remote ON/OFF signal NO Pin 5 PS ON Remote ON/OFF signal NC Pin Connections Pin 6 SGND Signal Common J2 Pin 7 PW OK Power Good Pin 1 +12 V Fan Voltage Pin 8 5 Vsb Stand-by Voltage Pin 2 SGND Return Pin 9 DC OK DC Power Good Signal J3 Pin 1 Vo + Main Output Pin 2 Vo + Main Output Pin 3 RTN Main Return Pin 4 RTN Main Return WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.. NLP250 DS 21Mar2016