POWER NLP40 Series Data Sheet Single, Dual and Triple Output Total Power: 40 - 50 W Input Voltage: 90 - 264 Vac 120 - 370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES ƒ 4.25 x 2.5 x 1.15 inch package (1U applications) ƒ Universal input ƒ Overvoltage and short circuit Electrical Specifications protection ƒ 40 W with free air convection Input ƒ EN55022, EN55011 conducted Input voltage range Universal input 90 - 264 Vac emission level B (See Note 9) 120 - 370 Vdc ƒ EN61000-4-2, -3, -4, -5, -6 immunity Input frequency range 47 - 440 Hz compliant Input surge current 120 Vac, cold start 15 A max. ƒ UL, VDE and CSA safety approvals 230 Vac, cold start 30 A max. ƒ NLP40 enclosure kit available Safety ground leakage current 120 Vac, 60 Hz 0.2 mA ƒ RoHS compliant 230 Vac, 50 Hz 0.4 mA Input current 120 Vac 1.4 A rms SAFETY 230 Vac 0.7 A rms ƒ VDE0805/EN60950/IEC950 Input fuse UL/IEC127 250 Vac H 3.15 A File 10401-3336-0093 Output Licence No. 93662 ƒ UL 60950 File No. E132002 Total regulation Main output ±2.0% (Line and load) Auxiliary outputs ±5.0% ƒ CSA C22.2 No. 950 File No. LR41062C Rise time At turn-on 1.0 s, max. Transient response Main output 5.0% max. dev., 25% step at 0.1 A/µs 1 ms rec. to 1.0% Temperature coefficient ±0.02%/°C Overvoltage protection Main outputs 135%, ±15% Short circuit protection Cyclic operation Continuous Minimum output current Single 0 A Multiple (See Note 5) NLP40 Series Data Sheet (10) EMC Charateristics Conducted emissions EN55022, FCC part 15 Level B Radiated emissions EN55022, FCC part 15 Level A ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 3 Perf. criteria 1 Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 1 Conducted immunity EN61000-4-6, level 3 Perf. criteria 1 General Specifications Hold-up time 120 Vac 12 ms @ 40 W 230 Vac 20 ms @ 40 W Efficiency 75% typical Isolation voltage Input/output 3000 Vac Input/chassis 1500 Vac Switching frequency Fixed 65 kHz, ±5 kHz Approvals and standards UL, CSA VDE 60950, IEC950, UL1950 (See Note 8) VDE0805, CSA C22.2 No. 950 Weight 200 g (7.06 oz) MTBF demonstrated MIL-HDBK-217F 150,000 hours min. Environmental Specifications Thermal performance Operating ambient (see derating curve) 0° C to +70 °C (See Notes 6, 7, 9) Non-operating -40 °C to +70 °C 50 °C to 70 °C ambient, convection cooled Derate to 50% load 0 °C to 50 °C ambient, convection cooled 40 W 0 °C to 50 °C ambient, 20 CFM forced air 50 W Peak (0 °C to +50 °C, 60 s) (See Note 2) Relative humidity Non-condensing 5 to 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 4): 5-500 Hz 2.4 G rms peak Shock Per MIL-STD-810E 516.4 Part IV NLP40 Series Data Sheet Output Current Output Total (3) (11,12) Ripple Model Number (1) (2) (1) Voltage Max Peak Fan Regulation (5) +3.3 V (I ) 4 A 5 A 4.5 A 50 mV ±2.0% NLP40-76T366J A +12 V (I ) 2 A 3 A 3 A 120 mV ±5.0% B –12 V (I ) 0.2 A 1 A 0.5 A 120 mV ±5.0% C (5) +5 V (I ) 4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7608J A +12 V (I ) 2 A 3 A 3 A 120 mV ±5.0% B –12 V (I ) 0.2 A 1 A 0.5 A 120 mV ±5.0% C (5) 4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7610J +5 V (I ) A +15 V (I ) 1.6 A 2 A 2 A 150 mV ±5.0% B –15 V (I ) 0.2 A 1 A 0.5 A 150 mV ±5.0% C (5) +12 V (I ) 1.8 A 2.2 A 2.1 A 120 mV ±2.0% NLP40-7627J A -12 V (I ) 1.8 A 2.2 A 2.1 A 120 mV ±5.0% B (5) +5 V (I ) 4 A 5 A 4.5 A 50 mV ±2.0% NLP40-7629J A +12 V (I ) 2 A 3 A 3 A 120 mV ±5.0% B 3.3 V (I ) 8 A 10 A 9 A 50 mV ±2.0% NLP40-76S3J A 5 V 8 A 10 A 9 A 50 mV ±2.0% NLP40-7605J 12 V 3.3 A 4.5 A 4 A 120 mV ±2.0% NLP40-7612J 15 V 2.6 A 3.6 A 3.3 A 150 mV ±2.0% NLP40-7615J 24 V 1.6 A 2.5 A 2 A 240 mV ±2.0% NLP40-7624J 48 V 0.8 A 1.1 A 1 A 300 mV ±2.0% NLP40-7617J Notes 1. Maximum output power is 40 W for natural convection cooling. With 20 CFM fan cooling, the maximum output power is 50 W. 2. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total reg. limits. 3. Figure is peak-to-peak. Output noise measurements are made across a 50 MHz bandwidth using a 12 inch twisted pair, terminated with a 47 µF capacitor. 4. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. 5. For multiple output units (except -7627J, 76T366J) to maintain stated regulation then: 0.25 ≤ I / I ≤5, for I > 0.3 A A B B 0.50 ≤ I / I ≤5, for I < 0.3 A A B B For maximum output current I(C) on triple output models, i.e. for I = IMax., I Amin. ≥0.5 A and I ≥ I . C A B For NLP40-7627J only, to maintain stated regulation then: 0.5 ≤ I / I ≤ 2. A B For NLP40-76T366J only, to maintain stated regulation then: 0.25 ≤ I / I ≤ 4. A B 6. For optimum reliability, no part of the heatsink should exceed 120 °C, and no semiconductor case temperature should exceed 130 °C. 7. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. 8. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 9. When the input voltage is <90 Vac the operating range is 0 °C to +40 °C. 10. For system EMI compliance, a ground choke may be required before connecting the ground wire to the chassis. It is recommended that this ground choke be placed as close as possible to the systems ac inlet to eliminate noise pick-up in the system. 11. The ‘J’ suffix indicates that these parts are Pb-free (RoHS6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliantversions may be available on special request, please contact your local sales representative for details. 12. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. 13. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. NLP40 Series Data Sheet DERATING CURVE Output Power (Watts) 50W 20 CFM FORCED AIR COOLING 40W 25W NATURAL CONVECTION 20W COOLING 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C Mechanical Drawing 4.25 (107.95) 0.125 4.00 (3.175) (101.60) J1 F1 N 1 L 2.50 2.25 (63.50) (57.15) J2 P1 T1 C5 MAXIMUM COMPONENT Mounting Hole Diameter HEIGHT 1.15 (29.21) ALL DIMENSIONS IN INCHES (mm) 0.138 (3.50) Typical TOLERANCE: .xxx ± 0.005" .xx ± 0.02" NLP40 Series Data Sheet Input Pin Connections J1 Pin 1 AC Line Pin 2 No Pin Pin 3 AC Neutral P1 Pin 1 Safety Ground Output Pin Connections J2 SINGLE DUAL TRIPLE Pin 1 +Vout V (B) V (B) Pin 2 +Vout V (A) V (A) Pin 3 +Vout V (A) V (A) Pin 4 Return Return Return Pin 5 Return Return Return Pin 6 Return Return V (C) Input and Output Connectors Mating Connectors AC (J1) Molex 26-60-4030 type Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimpterminals DC (J2) Molex 26-60-4060 type Molex 09-50-3061 with Triurcon 6838 or equivalent crimp terminals WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NLP40 Series-DS 21Mar2016