POWER NLP65-M Data Sheet Single, Dual and Triple Output Total Power: 65 W Input Voltage: 85 - 264 Vac # of Outputs: Single, Dual, Triple SPECIAL FEATURES ƒ 85 VAC to 264 VAC universal input range ƒ Harmonic current correction as standard ƒ Maximum component height 1.26 inches ƒ UL, CSA and VDE safety approvals ƒ Overvoltage and short circuit protection Electrical Specifications ƒ 5 x 3 x 1.26 inch (127.0 x 76.2 x 32 mm) footprint Input ƒ Available RoHS compliant Input voltage range Universal input (see Note 2) 85 - 264 Vac ƒ Two year warranty Input frequency range 47 - 63 Hz Input current 120 Vac 17 A max. SAFETY (cold start) 230 Vac 32 A max ƒ UL60601-1/CAN/CSA-C22.2 Safety ground leakage current 264 Vac, 60 Hz 95 μA No. 60601-1-M90 Input current 120 Vac 1.05 A rms ƒ VDE License No. 121949 under 230 Vac 0.51 A rms EN60601-1/IEC60601-1 Input fuse 250 Vac F 5 A Output Output power Natural convection 65 W max. Total regulation (line and load) See table Rise time At turn-on 1.0 s, max Transient response Main output 5.0% max. dev., 25% step at 0.1 A/μs 1ms recovery to 1.0% Temperature co-efficient ±0.02%/°C Overvoltage protection Main outputs 125%, ± 0% Short circuit protection Cyclic operation Yes NLP65-M Series Data Sheet All specifications are typical at nominal input, full load at 25°C unless otherwise stated. EMC Charateristics Conducted emissions EN55022, FCC part 15 Level A Radiated emissions EN55022, FCC part 15 Level A ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1 Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 2 Conducted immunity EN61000-4-6, level 3 Perf. criteria 2 General Specifications Hold-up time 120 Vac, 60 Hz 16 ms @ 65 W Efficiency 120 Vac, 65 W 72% typical Isolation voltage Input/output 4000 Vac Input/chassis 1500 Vac Switching frequency Fixed 100 kHz, ±5 kHz Approvals and standards EN60601-1, IEC60601-1 Weight 283 g (10 oz) MTBF demonstrated MIL-HDBK-217F 150,000 hours Environmental Specifications Thermal performance Operating (See derating curve) 0 °C to +70 °C Non-operating -40 °C to +85 °C 0 °C to 50 °C, ambient, convection cooled 65 W 50 °C - 70 °C ambient, convection cooled Derate to 50% load Peak (0 °C to 50 °C, 60 s) See table Relative humidity Non-condensing 5 to 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 5) 5-500 Hz 2.4 G rms approx. Shock per MIL-STD-810E 516.4 Part IV DERATING CURVE Output Power(Walts) 75W 20 CFM FORCED AIR COOLING 65W NATURAL 38W CONVECTION 32W COOLING 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C NLP65-M Series Data Sheet Ordering Information Output Current Output Total (4) (11, 12) Ripple Model Number (6) (1) (10) Voltage Regulation Max Peak Fan +5 V 7 A 9.1 A 8 A 50 mV ± 2.0% NLP65-9908J +12 V 2.5 A 3.3 A 3 A 150 mV ± 5.0% –12 V 0.5 A 0.81 A 1 A 120 mV ± 5.0% +5 V 7 A 9.1 A 8 A 50 mV ± 2.0% NLP65-9920J +24 V 2 A 2.6 A 2 A 240 mV ± 5.0% +5 V 7 A 9.1 A 8 A 50 mV ± 2.0% NLP65-9929J +12 V 2.5 A 3.3 A 3 A 150 mV ± 5.0% +12 V 5.4 A 7 A 6.5 A 120 mV ± 2.0% NLP65-9912J +15 V 4.4 A 5.7 A 5.3 A 150 mV ± 2.0% NLP65-9915J +24 V 2.7 A 3.5 A 3.5 A 240 mV ± 2.0% NLP65-9924J Notes 1. Natural convection cooling. Models NLP65-9929J, and NLP65-9908J must not exceed 62.5 Watts continuous output power with natural convection. Model NLP65-9920J not to exceed 65 Watts continuous output power with natural convection. 2. When the input voltage is less than 90 Vac the operating temperature range is 0 °C to +40 °C. The ripple and regulation specifications may not be met. 3. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation limits. 4. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic capacitor. 5. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. 6. To maintain stated regulation then: For single output units: I ≥ 0.2 A I max. For multiple output units: 0.25 ≤ I(A)/I(B) ≤ 5, for I(A) ≥ 0.2 A I(A) max. 7. For optimum reliability, no part of the heatsink should exceed 120°C, and no semiconductor case temperature should exceed 130°C. 8. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. 9. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. 10. Maximum continuous output power for all multiple output models must not exceed 75 Watts with 20 CFM forced air cooling at 50°C. 11. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 12. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. 13. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. NLP65-M Series Data Sheet Mechanical Drawings 5.00 (127.00) 4.550 0.225 (115.57) (5.715) J1 J3 3 N 1 1 L 3.00 2.550 6 (76.20) (64.770) T T1 T1 J2 C19 Mounting ALL DIMENSIONSIN INCHES (mm) MAXIMUM COMPONENT Hole Diameter HEIGHT 1.26 (32.00) 0.156 (4.00) TOLERANCE: .xxx 0.005" .xx 0.02" Input Pin Connections J1 Pin 1 AC Line Pin 2 No Pin Pin 3 AC Neutral J2 Pin 1 Safety Ground Output Pin Connections J3 SINGLE DUAL TRIPLE Pin 1 No Connection V (B) V (B) Pin 2 V (A) V (A) V (A) Pin 3 V (A) V (A) V (A) Pin 4 Return Return Return Pin 5 Return Return Return Pin 6 No Connection No Pin V (C) Input and Output Connectors Mating Connectors AC (J1) Molex 26-60-4030 type or equivalent Molex 09-50-3031 or equivalent with Molex 08-52-0113 or equivalent crimp terminals DC (J3) Molex 26-60-4060 or equivalent Molex 09-50-3061 with Molex 2478 phosphor bronze crimp terminals or equivalent. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NLP65-M Series-DS 21Mar2016