POWER NPS40-M Series Data Sheet 60 Watts Total Power: 40 - 60 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Medical and ITE safety approvals ƒ Universal input ƒ Less than 1U high ƒ 2” x 4” footprint ƒ Remote sense ƒ Overload and short circuit protection ƒ Adjustable output voltage Electrical Specifications ƒ High efficiency Input ƒ High MTBF Input ra nge 90 - 264 Vac (wide range) 127 - 300 Vdc ƒ Built in EMI filter (CISPR 22 Class B) Frequency 47 - 63 Hz ƒ International Efficiency Level V, Inrush current < 50 A peak @ 230 Vac, cold start @ 25° C Energy Star 2.0 & CeC compliant (except NPS42-M) Input power < 74 Watts ƒ Less than 300 mW no-load power Efficiency 87% average (as per Energy Star 2.0 standard) (NPS42-M, 80%) consumption EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; EN55022 ƒ 0 ˚C to +80 ˚C operation Class B conducted, VDE0878PT3 Class B conducted ƒ Input power < 74 watts Safety ground 275 µA @ 50/60 Hz; 264 Vac input ƒ Complies with EN61000-3-2 leakage current ƒ Class I approved Output ƒ Class II approved (with Class A EMI) Maximum power 45 W for convection (NPS42-M, 40 W). 60 W with 200LFM forced air ƒ LPX100 enclosure kit available (NPS42-M, 55 W) ƒ Dual AC fuses Adjustment range ±20% minimum (-10%, +20% for NPS42-M) ƒ RoHS compliant Hold-up time 13/75 ms 115/230 Vac input line Overload protection Short circuit protection on all outputs. Case overload protected @ SAFETY 110-160% of normal rating ƒ TUV: 60950, 60601-1 Overvoltage protection 30-50% above nominal output ƒ UL: 60950, 60601-1 Remote sense Compensated for 0.5 V lead drop max. Will operate without remote ƒ CSA: 60950, 60601-1 sense connected. Reverse connection protected. ƒ NEMKO: 60950, 60601-1 ƒ CB: Certificate and report ƒ CE: Mark (LVD) ƒ CQC: Mark NPS40-M Series Data Sheet Environmental Specifications Operating temperature 0° to 50 °C ambient derate each output at 2.5% per degree from 50° to 80 °C. -20 °C start up Storage temperature -45 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Mechanical Drawing BARCODE 4.00" 0.86" VR1 (101.6) (21.8 max) 3.73" OUTPUT VOLTAGE M1 (94.6) ADJUST POT GND TAB (CN1) PIN 1 PIN 1 PIN 3 PIN 6 INPUT CONNECTOR (SK1) 6 PINS OUTPUT M2 0.16” (4.0) MOUNTING HOLE MODEL LABEL ROHS LABEL CONNECTOR (4 PLACES) (SK2) 0.197” (5.0) MINIMUM STANDOFF HEIGHT 1.72" 1.00" (43.8) (25.4) 2.00" (50.8) NPS40-M Series Data Sheet Ordering Information Ripple Minimum Maximum Load with Maximum Load with 1 2 Model Number Output Voltage Peak Load Regulation 3 Load Convection Cooling 200LFM Forced Air P/P (PARD) NPS42-M 5 V 0 A 8 A 11 A 13 A ± 2% 50 mV NPS43-M 12 V 0 A 3.75 A 5 A 5.5 A ± 2% 120 mV NPS44-M 15 V 0 A 3 A 4 A 4.4 A ± 2% 150 mV NPS45-M 24 V 0 A 1.9 A 2.5 A 2.75 A ± 2% 240 mV NPS48-M 48 V 0 A 0.94 A 1.25 A 1.38 A ± 2% 480 mV 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Connector NPS42-M NPS43-M NPS44-M NPS45-M NPS48-M SK1-1 Line Line Line Line Line SK1-3 Neutral Neutral Neutral Neutral Neutral CN1 Ground Ground Ground Ground Ground SK2-1 +5 V +12 V +15 V +24 V +48 V SK2-2 +5 V +12 V +15 V +24 V +48 V SK2-3 Common Common Common Common Common SK2-4 Common Common Common Common Common SK2-5 -Sense -Sense -Sense -Sense -Sense SK2-6 +Sense +Sense +Sense +Sense +Sense Notes: Mating Connectors 1. Specifications subject to change without notice. Molex 09-50-8031 (USA) AC Input 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm) 09-91-0300 (UK) 3. Mounting holes M1 and M2 should be grounded for EMI PINS: 08-52-0113 purposes. 4. Mounting hole M1 is safety ground connection. Molex 09-50-8061 (USA) DC Outputs 09-93-0600 (UK) 5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated. PINS: 08-52-0113 6. For DC input an external DC safety rated fuse must be used Artesyn Embedded Technologies Connector Kit #70-841-006, includes 7. Warranty: 2 year all of the above 8. Weight: 0.26lbs/0.118kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NPS40-M DS 21Mar2016