POWER NPS60-M Series Data Sheet 60 Watts Total Power: 60 Watts Input Voltage: 90 - 264 VAC 127 - 300 VDC # of Outputs: Single SPECIAL FEATURES ƒ Medical and ITE safety approvals ƒ Universal input ƒ Less than 1U high ƒ 2” x 4” footprint ƒ Remote sense ƒ Overload and short circuit protection ƒ Adjustable output voltage ƒ High efficiency Electrical Specifications ƒ High MTBF Input ƒ Built-in EMI filter (CISPR 22 Class B) Input ra nge 90 - 264 Vac (wide range) 127-300 Vdc ƒ International Efficiency Level V, Energy Star 2.0 & CeC compliant Frequency 47 - 63 Hz (except NPS62-M) Inrush current < 50 A peak @ 230 Vac, cold start @ 25° C ƒ Less than 300 mW no-load power Input power < 74 Watts consumption (less than 500 mW for NPS62-M) Efficiency 87% average (as per Energy Star 2.0 standard) (NPS62-M, 80%) ƒ 0 °C to +80 °C operation EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted ƒ Input power < 74 watts ƒ Complies with EN61000-3-2 Safety ground 275 µA @ 50/60 Hz; 264 Vac input leakage current ƒ UL Class I approved ƒ Class II approved (with Class A EMI) Output ƒ LPX100 enclosure kit available Maximum power 60 W for convection ƒ Dual AC fuses Adjustment range ± 20% minimum ƒ RoHS compliant Hold-up time 13/75 ms 115/230 Vac input line Overload protection Short circuit protection on all outputs. Case overload protected @ SAFETY 110-160% of normal rating ƒ TUV: 60950, 60601-1 Overvoltage protection 30-50% above nominal output ƒ UL: 60950, 60601-1 Remote sense Compensated for 0.5 V lead drop max. Will operate without remote ƒ CSA: 60950, 60601-1 sense connected. Reverse connection protected. ƒ NEMKO: 60950, 60601-1 ƒ CB: Certificate and report ƒ CE: Mark (LVD) ƒ CCC: Mark NPS60-M Series Data Sheet Environmental Specifications Operating temperature 0 ° to 50 °C ambient derate each output at 2.5% per degree from 50 ° to 80 °C. -20 °C start up Storage temperature -45 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Mechanical Drawing BARCODE SERIAL LABEL VR1 4.00" 0.87" OUTPUT VOLTAGE (101.6) (22) 3.73" ADJUST POT M1 NPS62-M 1.14” (29) (94.6) GND TAB (CN1) PIN 1 PIN 1 SK2 SK1 PIN 6 PIN 3 INPUT CONNECTOR (SK1) M2 6 PIN OUTPUT MODEL LABEL 0.16” (4.0) MOUNTING HOLE CONNECTOR (4 PLACES) (SK2) ROHS LABEL 0.197” (5.0) MINIMUM STANDOFF HEIGHT 1.01" 1.72" (26) (43.8) NPS62-M 1.28” (32.6) 2.00" (50.8) NPS60-M Series Data Sheet Ordering Information Ripple Minimum Maximum Load with 1 2 Model Number Output Voltage Peak Load Regulation 3 Load Convection Cooling P/P (PARD) NPS62-M 5 V 0 A 11 A 13 A ± 2% 50 mV NPS63-M 12 V 0 A 5 A 5.5 A ± 2% 120 mV 4 NPS63-M-006 12 V 0 A 5 A 5.5 A ± 2% 120 mV NPS64-M 15 V 0 A 4 A 4.4 A ± 2% 150 mV NPS65-M 24 V 0 A 2.5 A 2.75 A ± 2% 240 mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. Compliant to Level VI efficiency. 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Connector NPS62-M NPS63-M NPS65-M SK1-1 Line Line Line SK1-3 Neutral Neutral Neutral CN1 Ground Ground Ground SK2-1 +5 V +12 V +24 V SK2-2 +5 V +12 V +24 V SK2-3 Common Common Common SK2-4 Common Common Common SK2-5 -Sense -Sense -Sense SK2-6 +Sense +Sense +Sense Notes: Mating Connectors 1. Specifications subject to change without notice. Molex 09-50-8031 (USA) AC Input 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5 mm) 09-93-0300 (UK) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. PINS: 08-52-0113 4. Mounting hole M1 is safety ground connection. Molex 09-50-8061 (USA) DC Outputs 5. Specifications are for convection rating at factory settings at 115 Vac 09-93-0600 (UK) input, 25 °C unless otherwise stated. PINS: 08-52-0113 6. For DC input an external DC safety rated fuse must be used 7. Warranty: 2 year Artesyn Embedded Technologies Connector Kit #70-841-006 includes 8. Weight: 0.26 lbs/0.118 kg all of the above. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NPS60-M DS 21Mar2016