POWER NPT40-M Series Data Sheet 55 Watts Total Power: 45 - 55 Watts Input Voltage: 90 - 264 Vac 120 - 300 Vdc # of Outputs: Triple SPECIAL FEATURES ƒ Medical and ITE safety approvals ƒ Universal input ƒ Less than 1U high ƒ 2” x 4” footprint ƒ Overload and short circuit protection ƒ High MTBF ƒ Built in EMI filter (CISPR 22 Class B) ƒ 0 °C to +80 °C operation Electrical Specifications ƒ Input power < 74 watts Input ƒ Complies with EN61000-3-2 Input ra nge 90 - 264 Vac (wide range) 127 - 300 Vdc ƒ Class I approved Frequency 47 - 440 Hz ƒ Class II approved (with Class A EMI) Inrush current < 50 A peak @ 230 Vac, cold start @ 25 °C ƒ LPX100 enclosure kit available ƒ Dual AC fuses Input power < 74 Watts ƒ RoHS compliant Efficiency 75% average EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted SAFETY Safety ground 275 µA @ 50/60 Hz; 264 Vac input ƒ TUV: 60950, 60601-1, 3rd edition leakage current ƒ UL: 60950, 60601-1 Output ƒ CSA: 60950, 60601-1 ƒ CB: Certificate and report Maximum power 45 W for convection 3rd edition 55 W with 30CFM forced air ƒ CE: Mark (LVD) Hold-up time 10/20 ms 115/230 Vac input line ƒ CQC: Mark Overload protection Short circuit protection on all outputs. Case overload protected @ 110% to 160% above peak rating Overvoltage protection 6.5 to 7.5 Vdc on the main output NPT40-M Series Data Sheet Environmental Specifications Operating temperature 0 ° to 50 °C ambient derate each output at 2.5% per degree from 50 °C to 80 °C. -20 °C start up Storage temperature -45 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Mechanical Drawing BARCODE SERIAL LABEL 4.00" 0.96" (101.6) (24.4) 1.10" 3.73" (28) (94.6) .063" (1.6) M1 GND TAB (CN1) 6 PIN 1 SK1 SK2 PIN 3 1 M2 RoHS LABEL MODEL LABEL 4.0 MOUNTING HOLE 4 PLACES 0.197” (5.0) MINIMUM STANDOFF HEIGHT RoHS MODEL: NPT42-M MADE IN PHILIPPINES 1.10" (28) 1.72" (43.8) 2.00" (50.8) NPT40-M Series Data Sheet Ordering Information Ripple Minimum Maximum Load with Maximum Load with 1 2 Model Number Output Voltage Peak Load Regulation 3 Load Convection Cooling 30CFM Forced Air P/P (PARD) NPT42-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +12 V 0.1 A 2.5 A 3 A 4 A ± 5% 120 mV -12 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 120 mV NPT43-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +15 V 0.1 A 2 A 2.4 A 4 A ± 5% 150 mV -15 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 150 mV NPT44-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +24 V 0.1 A 1.0 A 1.5 A 2 A ± 5% 240 mV +12 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 120 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. Minimum loads are required. 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin AssignmentsMating Connectors Connector NPT42-M NPT43-M NPT44-M Molex 09-50-8031 (USA) AC Input 09-93-0300 (UK) SK1-1 Line Line Line PINS: 08-52-0113 SK1-3 Neutral Neutral Neutral Molex 09-50-8061 (USA) DC Outputs CN1 Ground Ground Ground 09-93-0600 (UK) SK2-1 +5 V +5 V +5 V PINS: 08-52-0113 SK2-2 +5 V +5 V +5 V Artesyn Embedded Technologies Connector Kit #70-841-006, includes all of the above. SK2-3 Common Common Common SK2-4 Common Common Common 1. Specifications subject to change without notice. SK2-5 -12 V -15 V +12 V 2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) SK2-6 +12 V +15 V +24 V 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Ground faston tab size is 6.35 mm x 0.80 mm 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated. 7. Warranty: 2 years 8. Weight: 0.3 lbs/.14 kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NPT40-M DS 24Jun2016