POWER NTS350 Series Data Sheet 350 Watts Total Power: 200 - 350 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single SPECIAL FEATURES ƒ Active power factor correction ƒ IEC EN6100-3-2 compliance ƒ Remote sense ƒ Power fail and remote inhibit ƒ Single wire current sharing ƒ Built-in EMI filter ƒ Low output ripple ƒ 5 V standby Electrical Specifications ƒ 12 V fan output Input ƒ Overvoltage protection Input ra nge: 85 - 264 Vac (wide range) ƒ Overload protection Frequency: 47 - 440 Hz (47- 63 Hz for -CEF versions) ƒ Thermal overload protection Inrush current: 38 A max., cold start @ 25 °C ƒ DC power good ƒ Built in OR-ing diode/FET Efficiency: 85% typical at full load ƒ Optional fan cover (-CF suffix) EMI filter: FCC Class B conducted and radiated; CISPR22 Class B conducted ƒ Optional end fan cover (-CEF suffix) and radiated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B conducted and radiated. Safety ground leakage < 0.5 mA @ 50/60 Hz, 264 Vac input SAFETY current: ƒ TUV 60950 Output ƒ UL 0950 Maximum power: 200 W for convection; 350 W with 30CFM forced air ƒ CSA 60950 Adjustment range: ± 5% ƒ cULus 60950 (-CEF) ƒ NEMKO 60950 Standby output: 5 V @ 2 A regulated, ± 5% ƒ AUSTEL 60950 Fan output: 12 V @ 1 A, -5 %, +7%, 0.5 A for -CF version ƒ CB Certificate and report Hold-up time: 20 ms @ 350 W load, 115 Vac nominal line at factory voltage setting ƒ CE Mark (LVD) Overload protection: Short circuit protection on all outputs. Case overload protected @ ƒ CCC Certificate 115 - 130% of peak rating Overvoltage protection: 20 - 35% above nominal output LPS100-M Series Data Sheet NTS350 Series Data Sheet Logic Control Power failure TTL logic signal goes high 100 - 500 msec after main output. It goes low at least 4 msec before loss of regulation Remote on/off Requires an external contact closure to inhibit outputs DC OK TTL logic goes high after the output is in regulation. It goes low when there is loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Environmental Specifications Operating temperature: 0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. Storage temperature: -40 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Operating; non-condensing 10% to 90% RH Three orthogonal axes, sweep at Vibration: 1 oct/min, 5 min. dwell at four major resonances. 2 G peak 8 Hz to 500 Hz, operational MTBF demonstrated: 1M hours at full load and 25 °C ambient conditions Ordering Information Maximum Load Maximum Load Ripple 1 2 Model Number Output Voltage Minimum Load with Convection with 30CFM Peak Load Regulation 3 P/P (PARD) Cooling Forced Air NTS353 12 V 0 A 16.6 A 29.2 A 33 A ± 2% 120 mV NTS355 24 V 0 A 8.3 A 14.6 A 16.5 A ± 2% 240 mV NTS358 48 V 0 A 4.2 A 7.3 A 8.2 A ± 2% 480 mV NTS359 54 V 0 A 3.7 A 6.5 A 7.4 A ± 2% 540 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4 . CF suffix added to the model number indicates cover with top fan. -CEF suffix added to the model number indicates cover with end mounted fan cover and AC inlet 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. LPS100-M Series Data Sheet NTS350 Series Data Sheet Pin Assignments Adjustment Potentiometers Connector P1 +V1 Output adjust SK1 PIN 1 Line P3 +5VSB adjust PIN 3 Neutral Mating Connectors PIN 5 Ground SK1 AC input Molex 09-50-8051 (USA) SK5 PIN 1 V1 swp Molex 09-91-0500 (UK) 1 5 PIN 2 - Remote Sense PINS:08-52-0113 610 PIN 3 + Remote Sense SK2,3,4 Molex BB-124-08 PIN 4 5VSB (standby) SK5 Control signals Molex 90142-0010 PIN 5 5VSB return PINS: 90119-2110 PIN 6 +12V Or Amp: 87977-3 PIN 7 Common PINS: 87309-8 PIN 8 Inhibit Artesyn Embedded Technologies Connector Kit #70-841-022 includes all of the above PIN 9 DC power good (DC OK) 1. Specifications subject to change without PIN 10 Power Fail (POK) 2. All dimensions in inches (mm), tolerance is ± 0.2”. 3.Specifications are at factory settings 4. Mounting maximum insertion depth is 0.12”. 5.Warranty: 2 year 6.Weight: NTS35X 1.65 lbs/750g. NTS35X-CF 2 lbs/909g. NTS35X-CEF 2.25 lbs/1022g. NTS350 Series Data Sheet Mechanical Drawing - CEF option AIR FLOW DIRECTION 9.15" (232.3) 2.40" 5.85" (61) (148.6) 6.244" (158.6) 4.7" (119.6) 2.9" 5.5" (73.6) (139.7) #6-32 (8 places) M3 (8 places) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. NTS350 DS 21Mar2016 b a b a a b b a a b a b a b a b 1.61" (40.9) 4.0" 1.255" (31.9) (101.6) 0.862" (21.9) 0.862" (21.9) 0.752" 6.437" (19.1) (63.5) 531 NTS350 Series Data Sheet Mechanical Drawing + V OR-ing out (Must be used in parallel operation) + V out (Do not use in parallel operation) Common 5 10 SK1 1 6 -CF option P1 P1 (SEE NOTE 5) P3 Voltage ADJ POT 1.27 (32.26) -CF option .75 (19.1) (3X) a b P1 1.14 (29.1) 1.5 (38.10) b P3 a 6.4 (2X) 5.85 (148.7) 6.25 (158.7) a bb a 2.5 (63.5) 4.0 (101.6) (4X) b a a b #6-32 (8 places) 4.7 (119.6)(2X) 5.5 (139.7) (2X) M3 (8 places) 7.0 (177.8)