POWER TLP150 Series Data Sheet Single Output Total Power: 150 Watt Input Voltage: 85 - 264 Vac # of Outputs: Single SPECIAL FEATURES ƒ 150 W on main channel with only 200 LFM ƒ Low profile fits 1U applications ƒ Active PFC and EN61000-3-2 compliant ƒ Integrated Or-ing diode Electrical Specifications ƒ Active current sharing Output ƒ Integrated control and Adjustment range ± 10% monitoring features Total regulation Main output ± 3% ƒ Overcurrent, overvoltage and (line and load) Auxiliary outputs ± 5% overtemperature protection Fan output ± 10% ƒ Compliance to EN55022-B Turn-on delay @120 Vac input 2.0 s max. conducted noise standard ƒ 12 V fan output Transient response Main output 5% 25% to 75% max. dev., 1 ms max. ƒ 5 V standby output (optional) step at 0.5 A/µs recovery to 1% ƒ RoHS compliant Temperature coefficient ±0.02%/°C ƒ Two year warranty Overvoltage protection Main outputs 125% ± 5% Short circuit protection Current limited Continuous SAFETY Minimum output current Singles 0 A ƒ TUV EN60950-1/IEC60950-1 Fan voltage output See Note 9 12 V @ 0.5 A ƒ UL60950-1/CSA22.2 No.60950-1 Standby output See Note 9 5 V @ 1.0 A Input Input voltage range Universal input 85 - 264 Vac Input frequency range 47 - 63 Hz Input surge current 264 Vac (cold start) 40 A max. Safety ground leakage 264 Vac, 50 Hz 1 mA current Input current 100 Vac @ 250 W 2.5 A rms 120 Vac @ 250 W 1.8 A rms 230 Vac @ 250 W 0.8 A rms Input fuse UL/iEC127 T 3.15 A, 250 Vac LPS100-M Series Data Sheet EMC Characteristics Conducted emissions EN55022, FCC part 15 Level B Harmonic current correction EN61000-3-2 Compliant ESD air EN61000-4-2 Level 3 ESD contact EN61000-4-2 Level 3 Fast transients EN61000-4-4 Level 4 Surge EN61000-4-5 Level 3 Conducted immunity EN61000-4-6 Level 3 General Specifications Hold-up time 85 Vac @ 60 Hz 20 ms @ 150 W 115 Vac @ 150 W 81% typ. Efficiency 230 Vac @ 150 W 84% typ. Input/output 3000 Vac Isolation voltage Input/chassis 1500 Vac UL/cUL UL60950-1/CSA22.2 No. 60950-1 Safety approvals (see note 6) VDE EN60950-1/IEC60950-1 Weight 260g (9.2 oz) Telcordia SR-332 900,000 hours min. MTBF (@25 ºC) MIL-HDBK-217F 350,000 hours min. Environmental Specifications Operating ambient, 0 °C to +70 °C Thermal performance (See derating curve) Non-operating -40 °C to +85 °C 0 °C to 50 °C ambient, 150 W 200 LFM forced air 0 °C to 50 °C ambient, 100 W convection cooled 50 °C to 70 °C ambient, Derate linearly to 50% load Relative humidity Non-condensing 5 - 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 7) 5 - 500 Hz 2.4 G rms peak Shock per MIL-STD-810E 516.4 Part IV TLP150 Series Data Sheet Ordering Information Output Currents Output Total (3) (8, 10) Ripple Model Numbers Voltage Regulation (1, 4) (2, 4) Min Max (free air) Max (forced air) 12 V 0 A 8.4 A 12.5 A 120 mV ± 3.0% TLP150R-96S12J 24 V 0 A 4.2 A 6.3 A 240 mV ± 3.0% TLP150R-96S24J 36 V 0 A 2.7 A 4.2 A 360 mV ± 3.0% TLP150R-96S36J 48 V 0 A 2.1 A 3.2 A 480 mV ± 3.0% TLP150R-96S48J Notes 1 Free air convection. Maximum continuous output power not to exceed 100W. Refer to Figure 1 for the derating curve. 2 200 LFM forced air cooling from the ac input side. Maximum continuous output power not to exceed 150 W. 3 Figure is peak-to-peak for room temperature rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF tantalum capacitor and a 0.1 µF ceramic capacitor. 4 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 115 °C and no semi-conductor case temperature should exceed 120 °C. 5 No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 Replace the ‘J’ at the end of the model number with ‘FJ’ when the optional standby output and/or remote ON/OFF control is required e.g. TLP150R-96S12FJ. 9 12 V (fan) present when main output is present. An optional 5 Vsb (standby) output is available whenever ac input is present, regardless of remote ON/OFF signal status. 10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 11 NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded T echnologies representative or use the on-line model number search tool at www.artesyn.com/power. 12 Power good signal required 100 mA load on the main output (check with engineering on all models). 13. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Outline Dimensions DERATING CURVE Output Power (Watts) 5.000 (127.00) 150 W 200 LFM (1.0 m/s) 4.550 (115.57) FORCED AIR COOLING 100 W 75 W J3 NATURAL CONVECTION COOLING 50 W 1 1 0 W J1 FAN 1 Neutral 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C J4 Live 1 1 Trimmer Adjust J301 R88 J2 Figure 1: Derating Curve Output Voltage Figure 1: Derating Curve Ground/Earth 0.225 (5.72) Total Height ø0.156 (4 Places) 1.250 (31.75) Dimensions in Inches (mm) Figure 2: Mechanical Drawing 3.000 (76.20) 2.550 (64.77) 0.225 (5.72) TLP150 Series Data Sheet Connector and Mating Connector Types Connector Type Mating Connector Type J1 Molex 09-65-2038 (5273 series) Molex 09-52-4034 (5239 series) or equivalent with void pin 2 or equivalent Molex 08-52-0072 (2478 series) or equivalent crimp terminals J2 AMP 63849-1 or equivalent AMP 2-520263-4 or equivalent (6.35 mm straight) (straight spade for 22-18 AWG wire) Molex 09-65-2068 (5273 series) Molex 09-52-4064 (5239 series) or equivalent with J3 or equivalent Molex 08-52-0072 (2478 series) or equivalent crimp terminals Molex 22-23-2061(6373 series) Molex 22-01-3067 (2695 series) or equivalent with J4 or equivalent Molex 08-50-0113 ( 2759 series) or equivalent crimp terminals Leoco 2421P04H000 (2421 series) Leoco 2420S04000 (2420 series) or equivalent J301 or equivalent with Leoco 2453TPB00V1 (2453T series) or equivalent crimp terminals (Optional) or JST EHR-4 (EH series) or equivalent with JST SEH-001T-P0.6 (EH series) or equivalent crimp terminals Molex 22-23-2021(6373 series) Molex 22-01-3027 (2695 series) or equivalent with Fan or equivalent Molex 08-50-0113 (2759 series) or equivalent crimp terminals Pin Connections Pin Connections J1 Pin Connections J4 Pin Connections Pin 1 Neutral Pin 1 -S -Vo Remote Sense Pin 2 Live Pin 2 DC OK DC Power Good Signal J2 Tab Connections Pin 3 PW OK Power Good* Tab Ground/Earth Pin 4 LS Load Share Signal Pin 5 +S +Vo Remote Sense Pin 6 SGND Signal Common Pin Connections J301 Pin Connections (Optional) J3 Pin Connections Pin 1 5 Vsn Standby Voltage Pin 1 RTN Main Return Pin 2 SGND Signal Common Pin 2 RTN Main Return Pin 3 Reserved Do Not Connect Pin 3 RTN Main Return Pin 4 PS OFF Remote ON/OFF Signal Pin 4 Vo +Main Output Fan Pin Connections Pin 5 Vo +Main Output Pin 1 + 12 V Fan Voltage Pin 6 Vo +Main Output Pin 2 +SGND Return WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and For more information: www.artesyn.com/power service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, For support: productsupport.ep@artesyn.com trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. TLP150 DS 22Mar2016