Manufacturers
IDEC CORPORATION HR1S-AC5121P
Description
Electromechanical Relay 24VDC 24VAC 10.5A 3PST-NO(22.5x99x114)mm DIN Rail Safety Control Relay
HR1S-AC5121P
Part Number
HR1S-AC5121P
Price
Request Quote
Manufacturer
IDEC CORPORATION
Lead Time
Request Quote
Category
Relays and I/O Modules » Relay Other
Specifications
Manufacturer
IDEC Corporation
Manufacturers Part #
HR1S-AC5121P
Industry Aliases
HR1S-AC5121P
Sub-Category
Other Relays
Factory Pack Quantity
1
Datasheet
Extracted Text
Safety Control Relay HR1S-AC • 1NC or 2NC safety input type, such as E-Stops or Interlock Switches • EN ISO 13849-1 PLe, Safety Cat 3 compliant, and EN 62061 SIL 3 • Fault diagnosis function with dual safety circuits. • Internal relay operations can be monitored with LED Indicator . • Finger-safe protection • 22.5mm wide, 35mm DIN rail mounting • UL listed, CSA certified, TÜV NORD approved Terminal Arrangement Dimensions (mm) Part Numbers Part Numbers Terminal Style HR1S-AC5121 Integrated Terminal Block A1 13 23 33 HR1S-AC5121P Removable Terminal Block A1 13 23 33 14 24 Y1 Y2 14 24 Y1 Y2 A1/A2A1/A2 Fuse Fuse K1/K2K1/K2 Specifications Operating Temperature –10 to 55°C (no freezing) Degree of Protection Terminal: IP20, Housing: IP40 24V AC (–20 to +10%) 50/60 Hz Rated Power Voltage A1 14 24 34 24V DC (±20%) A2 Y43 Y44 A1 14 24 34 AC: 2.2 VA (24V AC) maximum Power Consumption 22.522.5 114 114 DC: 1.2W (24V DC) maximum Overcurrent Protection Electronic A2 Y43Y44 Control Circuit Voltage 24V Performance Level (PL) e (EN ISO 13849-1) Safety Category 3 (EN 954-1) Safety Integrity Level (SIL) 3 (EN 62061) LED Indicator Response Time 100ms maximum • A1/A2 Fuse: Input Synchronization Time Unlimited Turns on when power circuit is normal. Overvoltage Category III Turns off when power is interrupted or the electronic fuse blows. Pollution Degree 2 • K1: Turns on when K1 relay operates. Rated Insulation Voltage 300V • K2: Turns on when K2 relay operates. Instantaneous 3NO (Stop Cat 0) Auxiliary Contact 1NO (transistor, PNP) AC-15 C300: Ue= 240VAC, Ie=0.75A Safety Circuit DC-13 Ue=24VDC, Ie=2A The HR1S-AC5121P terminal block can be Transistor Circuit 24V/20mA removed and installed as shown, allow- ing for easy installation and replacement Minimum 17V/10mA (initial value) of modules. Applicable Load Operation Frequency 1200 operations/h maximum Rated Current Safety circuit output total: 10.5A maximum 2 2 HR1S-AC5121: 1 × 2.5mm , 2 × 0.75mm maximum Wire Size 2 2 HR1S-AC5121P: 1 × 2.5mm , 2 × 1.5mm maximum Weight 160g Use a 4A fuse (Type gL) for power fuse protection. Use a 4A (Type gL) or a 6A fast blow fuse for output fuse protection. Output Safety Contact Outputs Ratings 99 99 HR1S-AC Wiring Diagram Safety Category 3 Example Circuit (using an emergency stop switch with 2NC contacts) F1 Fuse: 4A gL L1 (+) (3) ESC: External Start Condition S2 S1: Emergency Stop Switch S2: Start Switch K4 F1: Protection fuse for safety relay module power K4, K5: Safety contactor K5 S1 ESC +24V DC (4) The Safety Category is achieved A1 Y1 Y2 13 23 33 Y43 by the entire control system. Take HR1S-AC any connected safety equipment K1 K4 K4 K4 and wiring into consideration. + LOGIC A1/A2 K1/K2 T – K2 K5 K5 K5 K1 K2 A2 14 24 34 Y44 K4 K5 N (–) (1) Three safety outputs (2) One transistor output (1) (2) (3) See the specifications for maximum fuse size (4) Jumper for terminal Y1-Y2 (for automatic start) Safety Category 1 Example Circuit (using an emergency stop switch with 1NC contact) ESC: Exernal Start Condition L1 (+) S1: Emergency Stop Switch F1 F2 F3 F4 Fuses: 4A (gL) S2: Start Switch (3) (3) (3) (3) F1: Protection fuse for the power of safety relay module F2 to F4: Protection fuse for the output of safety relay module S1 S2 ESC Fuses: 4A (gL) or 6A fast blow type +24V DC (4) A1 Y1 Y2 13 23 33 Y43 HR1S-AC K1 + LOGIC A1/A2 K1/K2 T – K2 K1 K2 A2 14 24 34 Y44 (1) Three safety outputs N (–) (2) One transistor output (3) See the specifications for maximum fuse size (1) (2) Output Contact Electrical Life 100 AC15: 230V DC13: 24V 10 AC1: 230V DC1: 24V 1 4 5 6 7 10 10 10 10 Operations Operating Current × 0.1A HR1S-AC Safety Relay Module Operation Chart When Using a Start Switch Power ON Emergency Stop not Operated Emergency Stop Operated Emergency Stop Switch A1 (NC1) Emergency Stop Switch A2 Start Switch Operated ON (NC2) OFF Feedback Circuit with Start Switch (Y1-Y2) Output 13-14 (NO Contact) Output 23-24 (NO Contact) Output 33-34 (NO Contact) Transistor Output Y43-Y44 (NO Contact) ON OFF Contact Status When not Using the Start Switch Power ON Emergency Stop not Operated OFF Emergency Stop Operated Emergency Stop Switch A1 (NC1) Emergency Stop Switch A2 (NC2) Y1-Y2 Jumper Output 13-14 (NO Contact) Output 23-24 (NO Contact) Output 33-34 (NO Contact) Transistor Output Y43-Y44 (NO Contact) ON OFF Contact Status Specifications and other descriptions in this document are subject to change without notice. IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: 408-745-5258 • www.IDEC.com/usa ©2011 IDEC Corporation. All Rights Reserved. 06/11 PDF only.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the HR1S-AC5121P?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Electromechanical Relay 220/240VAC 18.23KOhm 10A DPDT(27.5x21x41.6)mm Socket General Purpose Relay A...
Electromechanical Relay 100 to 240VAC 3A SPST-NO(42x75x77.5)mm DIN Rail Relay Barrier EB3C-R01A
Electromechanical Relay SPST-NO 3A 12VDC 1.2KOhm DIN Rail EB3C-R02A
Electromechanical Relay SPST-NO 3A 12VDC 1.2KOhm DIN Rail EB3C-R03A
Electromechanical Relay SPST-NO 3A 12VDC 1.2KOhm DIN Rail EB3C-R05A
Electromechanical Relay SPST-NO 3A 12VDC 1.2KOhm DIN Rail EB3C-R08A
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods