PE99D Series 3.3 V PECL Clock Oscillators February 2016 • Pletronics’ PE99D Series is a quartz crystal • 5 x 7 mm LCC Ceramic Package controlled precision square wave generator with a • Enable/Disable Function on pad 1 PECL output. • Output frequency is synthesized. • The package is designed for high density surface • Low Jitter mount designs. • Low cost mass produced oscillator. • Tape and Reel or cut tape packaging. Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s W eight of the Device: 0.16 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D.1 Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit V Supply Voltage -0.5V to +4.6V CC Vi Input Voltage -0.5V to V + 0.5V CC Vo Output Voltage -0.5V to V + 0.5V CC I Output Current -50mA O Thermal Characteristics o The maximum die or junction temperature is 155 C o The thermal resistance junction to board is 30 to 50 C/W att depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms Copyright © 2010 Pletronics Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. PE99D Series 3.3 V PECL Clock Oscillators February 2016 Part Number: PE99 45 D E V - 125. 0M - XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHZ Supply Voltage V CC V = 3.3V + _ 10% Temperature Range o blank = -10 to +70 C o C = -20 to +70 C o E = -40 to +85 C Series Model Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm Series Model Part Marking: PLE PE99 Marking Legend: FF.FFF M PLE = Pletronics C YMDXX FF.FFF M = Frequency in MHz YMD = Date of Manufacture (year-month-day) All other marking is internal factory codes Codes for Date Code YMD Code Code 45678 A B CD E F G H J K LM Year Month 20142015201620172018 JANFEBMARAPRMAYJUNJULAUGSEPOCTNOVDEC Code 1 2 3 4 5 6 7 8 9 A B C D EF G Day 12345678910111213141516 Code HJKLMNPRTUVWXYZ Day171819202122232425262728293031 www.pletronics.com 425-776-1880 2 PE99D Series 3.3 V PECL Clock Oscillators February 2016 Electrical Specification for 3.30V + _10% over the specified temperature range and the frequency range of 10.9 MHZ to 766 MHZ and 876 MHZ to 1,175MHz Item Min Max Unit Condition Frequency Accuracy “45" -50 +50 ppm For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures “44" -25 +25 “20" -20 +20 Output Waveform PECL / ECL Output High Level 2.12 2.49 volts Referenced to Ground, V = 3.3 V CC 0.82 1.19 volts Referenced to termination voltage, V = 3.3 V CC -1.18 -0.81 volts Referenced to Vcc, V = 3.3 V CC Output Low Level 1.83 1.99 volts Referenced to Ground, V = 3.3 V CC 0.53 0.69 volts Referenced to termination voltage, V = 3.3 V CC -1.47 -1.31 volts Referenced to Vcc, V = 3.3 V CC Output Peak to Peak Level 0.405 1.076 volts Output Symmetry 47 53 % at 50% point of V (See load circuit) CC Jitter - 0.6 pS RMS 12 KHz to 20 MHZ from the output frequency - 2.8 pS RMS 10 Hz to 20 MHZ from the output frequency Output T and T 100 300 pS Vth is 20% and 80% of waveform RISE FALL V Supply Current (I ) - 90 mA CC CC Enable/Disable Internal Pull-up 50 - Kohm to V CC V disable - 0.8 volts Referenced to pad 3 V enable 2.00 - volts Referenced to pad 3 Output leakage V = V -50 +50 uA Pad 1 low, device disabled OUT CC V = 0V -50 +50 uA OUT Enable time - 10 nS Time for output to reach a logic state Disable time - 10 nS Time for output to reach a high Z state Start up time - 5 mS Time for output to reach specified frequency o Operating Temperature Range -10 +70 C Standard Temperature Range o - 20 +70 C Extended Temperature Range “C” Option o - 40 +85 C Extended Temperature Range “E” Option o Storage Temperature Range -55 +125 C Specifications with Pad 1 E/D open circuit or connected to V CC www.pletronics.com 425-776-1880 3 PE99D Series 3.3 V PECL Clock Oscillators February 2016 Typical Phase-Noise Response Load Circuit Test Waveform www.pletronics.com 425-776-1880 4 PE99D Series 3.3 V PECL Clock Oscillators February 2016 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 2000 MIL-STD-883 Method 3115 Charged Device Model 1500 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Font is Arial Bar code is 39-Full ASCII www.pletronics.com 425-776-1880 5 PE99D Series 3.3 V PECL Clock Oscillators February 2016 Mechanical: Inches mm A 0.276 + _0.006 7.00 + _0.15 B 0.197 + _0.006 5.00 + _0.15 C 0.067 + _0.010 1.70 + _0.25 1 D 0.038 0.96 1 E 0.200 5.08 1 F 0.004 0.10 1 G 0.050 1.27 1 H 0.055 1.40 1 I 0.024 0.60 1 Typical dimensions 1 Contacts: J 0.004r 0.10r Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) Not to Scale over 1 K 0.008r 0.20r Nickel 50 to 350 µinches (1.27 to 8.89 µm) 1 L 0.089 2.25 1 Center metalized pad “M” on the base is M 0.010r 0.25r not internally connected. Pad Function Note 1 Output When this pad is not connected the oscillator shall operate. Enable/Disable When this pad is <0.80 volts, the output will be inhibited (high impedance state.) Recommend connecting this pad to V if the oscillator is to be always on. CC 2 No connect The pad can be connected to Vcc, Ground or left open. This pad is internally connected. 3 Ground (GND) 4 Output Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the Supply Voltage. The outputs become a High Z when disabled and the voltage level is determined 5 Output* by the termination circuitry. 6 Supply Voltage Recommend connecting appropriate power supply bypass capacitors as close as (V ) possible. CC www.pletronics.com 425-776-1880 6 PE99D Series 3.3 V PECL Clock Oscillators February 2016 Reflow Cycle (typical for lead free processing) The part may be reflowed 3 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250 Constant Dimensions Table 1 T1 Tape D1 S1 T D0 E1 P0 P2 Max Size Min Min Max 8mm 1.0 2.0 + _0.05 1.5 12mm 1.5 1.75 4.0 0.6 0.6 0.1 +0.1 + _0.1 + _0.1 16mm 1.5 2.0 -0.0 + _0.1 24mm 1.5 Variable Dimensions Table 2 Tape B1 E2 Min F P1 T2 W Ao, Bo & Size Max Max Max Ko 16 mm 12.1 14.25 7.5 + _0.1 8.0 + _0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 B inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width C mm 13.0 +0.5 / -0.2 D mm 16.4 16.4 16.4 16.0 +2.0 +2.0 +2.0 -0.0 -0.0 -0.0 mm --- --- 24.4 24.0 +2.0 -0.0 mm --- --- 32.4 32.0 +2.0 -0.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 7 PE99D Series 3.3 V PECL Clock Oscillators February 2016 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 th 19013 36 Ave. W est Fax: 425-776-2760 Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright © 2005, 2006, 2008, 2010, Pletronics Inc. www.pletronics.com 425-776-1880 8