Manufacturers
TDK-LAMBDA CPFE1000F-28
Description
1000 W, Single Output, 28 VDC@36 A AC-DC Power Supply
Part Number
CPFE1000F-28
Price
Request Quote
Manufacturer
TDK-LAMBDA
Lead Time
Request Quote
Category
Circuit Protection » AC-DC Power Supply
Specifications
Manufacturer
TDK-Lambda
Manufacturers Part #
CPFE1000F-28
Industry Aliases
CPFE1000F-28
Brand
TDK-Lambda
Series
CPFE1000F
Factory Pack Quantity
1
Cooling Method
Conduction
Dimensions
10.63 x 7.48 x 2.40"
Efficiency
86%
Isolation
4.24 kVDC
Mechanical Style
Open / Enclosed Frame
Mounting
Chassis Mount
Number of Outputs
1
Operating Temperature
- 40 to + 70°C
Output Amps 1
36 A
Output Voltage V1 Nominal
28 VDC
Power
1000 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
CPFE1000F Series 720-1000W Conduction Cooled Power Supplies Features Base plate cooled, no fan required High efŢ ciency Protective coating MIL STD 461/462D CE102 EMC 2 I C Interface Wide range AC Input Key Market Segments & Applications SpeciŢ cations Model AC Input - 90 to 265VAC, 47-63Hz (up to 440Hz) (3) Input Current (1) A 13.6 / 6.6 (Model dependant) Inrush Current (115 / 230VAC) A 20 / 40 peak Power Factor - Meets EN61000-3-2 EfŢ ciency (typical) % 79 to 86% (Model dependant) Output Voltage Setpoint Accuracy - ±2% at 50% load Line Regulation mV 12V: 48mV, 28V: 56mV, 48V: 96mV Load Regulation mV 12V: 48mV, 28V: 56mV, 48V: 96mV Ripple and Noise (20MHz BW) - 1% (2% below 0°C) Over Current Protection % 105 - 140% (Automatic recovery) Over Voltage Protection - 125 - 145% (Automatic recovery) Parallel Operation - Yes (Single wire) Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present Auxiliary Supply - 10 - 14V, 20mA Remote On/Off (Opto isolated) - High = On Temperature CoefŢ cient - <0.02%/°C Overtemperature °C Shuts down between 90 - 115°C (Auto recovery) Hold Up Time (230VAC) ms 25ms Leakage Current (@230VAC,50Hz) mA < 1.5mA Remote Sense - Yes, compensates up to 500mV cable drop I²C Interface - Provides manufacturing location, date, serial number, part number, unit revision, output voltage & current read back, base plate temperature, remote on/off, IOG, DC good and over temperature warning Operating Temperature (Base plate) - 12V: -40 to +85°C, 28V & 48V: -40 to +70 / 85°C (See reverse side for derating)(2) Storage Temperature °C -40 to +100°C Humidity - Operating: 20 - 90%RH, Non operating 10 - 95%RH (Pcb assembly protective coated) Cooling - Conduction cooled through 6mm base plate Withstand Voltage - Input to Output 4242VDC, Input to Ground 2121VDC, Output to ground 500VDC Vibration (non operating) - MIL-STD-810F, Method 514.5, Figure 514.5C US (Category IV) and Figure 514.5C-15 (Category X) Shock - MIL-STD-810E, Method 516.5, Proc. I, IV, VI Safety Agency Approvals - UL60950-1, CSA 22.2 No 60950-1, EN60950-1 (Ed 2), CE Mark Line Dip - Complies with SEMI F47 (200VAC line only) Conducted & Radiated EMI - EN55022/EN55011 Class B, MIL STD 461/462D CE102 Immunity - IEC61000-4-2 (Contact Level 2, Air discharge Lvl 3), -3 (Lvl 3), -4(Lvl 3), -5 (Lvl 4), -6 (Lvl 3), -8 (Lvl 4), -11 (Class 3 ), -12 (Lvl 3), -14 (Class 3) Weight (Typ) g 2,400 Size (L x W x H) mm 270 x 190 x 61mm Warranty yrs 2 years (1) 100/200VAC (2) CPFE1000F-28, -48: -40 to +70°C below 170VAC input voltage (3) Reduced PFC above 63Hz. Contact technical support for 440Hz operation. 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 41 Disclaimer: us.tdk-lambda.com/lp/legal.htm CPFE1000F Series Model Selector Output Adjust Maximum EfŢ ciency (%) Model Voltage (V) Range (V) Current (110/220VAC) CPFE1000F-12 12 9.6 - 14.4 60 79 / 81 CPFE1000F-28 28 22.4 - 33.6 36 83 / 86 CPFE1000F-48 48 38.4 - 57.6 21 83 / 86 Derating (Ambient Temperature) Input Output Power (W) Model Voltage 50°C 60°C 70°C 85°C CPFE1000F-12 85VAC to 170VAC 720 720 576 360 170VAC to 265VAC 720 720 670 595 CPFE1000F-28 85VAC to 170VAC 1008 864 720 - 170VAC to 265VAC 1008 1008 958 883 CPFE1000F-48 85VAC to 170VAC 1008 864 720 - 170VAC to 265VAC 1008 1008 958 883 Outline Drawings 10.74in 61mm 2.40in 270mm 10.63in 2 x 260mm 10.24in 2 x 210mm 8.27in 2 x 154.500mm CUSTOMER MOUNTING HOLES 4.50mm THRU 6.08in 0.18in 2 x 107mm (12 PLACES) 4.21in 2 x 57mm 2.24in OUTPUT BUS BARS (--) M6 THREADED STUDS (2 PLACES) OUTPUT BUS BARS (+) M6 THREADED STUDS (2 PLACES) 6 x 179mm 190mm 7.05in 7.48in 2 x 5mm 0.20in 6 x 5.500mm 0.22in For Additional Information, please visit us.tdk-lambda.com/lp/products/cpfe-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 42 Revision B2: Apr 2015
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the CPFE1000F-28?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 1000W
AC-DC, MODULAR, INPUT 230VAC, OUTPUT - MODEL DEPENDENT, 1500W
CA400 H41153
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 400W
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 600W
240 W, Single Output, 24 VDC@10 A AC-DC Power Supply
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods